QA/QC Engineer – Fire Protection (Oil & Gas) - (field based)

SIBCA

Abu Dhabi

On-site

AED 180,000 - 300,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

SIBCA in Abu Dhabi is seeking an experienced QA/QC Inspector for oil and gas projects. You will perform inspections per approved ITP, verify MTC and certificates, witness tests, and ensure compliance with ADNOC standards on piping, tanks, and vessels.

This role requires CSWIP/BGAS/NDT certifications, strong documentation control, and coordination with subcontractors and client inspectors. The position emphasizes safety, daily record keeping, and timely reporting of NCRs and IRs.

Qualifications

  • CSWIP 3.1 or 3.2 welding inspection certification.
  • BGAS certification for painting & coating inspection.
  • ISO Internal Auditor certification.
  • NDT methods: VT mandatory; PT, MT, UT, RT advantageous.

Responsibilities

  • Perform inspections as per approved ITP and project requirements.
  • Prepare Project Quality Plan (PQP) and Inspection & Test Plans (ITP).
  • Prepare and manage QA/QC procedures, method statements, and quality documents.
  • Ensure compliance with NFPA, API, ASME, AWS and ADNOC standards.
  • Conduct material receiving inspections (MIR).
  • Verify MTC, test certificates, and approvals (UL/FM if applicable).
  • Check material identification, storage, and preservation.
  • Carry out site inspections for piping, tank, structural, and supports, valves installation; fire protection systems.
  • Witness and perform testing: hydrostatic tests, flushing and flow tests, functional and loop checks (F&G systems).
  • Verify welding activities as per approved WPS/PQR; check fit-up and welding consumables.
  • Monitor painting and coating activities (surface prep, galvanizing, DFT, holiday test, FBE coating, PQT).
  • Raise inspection reports (IR), MIR, and punch points; report NCRs.
  • Ensure all measuring and test equipment are calibrated.
  • Coordinate with sub contractors, other stakeholders and client inspectors during inspections.
  • Maintain daily inspection records and documentation.
  • Follow safety and permit requirements during inspection activities.

Skills

QA/QC inspections
Welding inspection
NDT methods
Site inspections
Documentation control

Education

CSWIP 3.1/3.2 Welding Inspection
BGAS painting & coating inspection
ISO Internal Auditor
NDT methods VT (mandatory)

Tools

Welding inspection equipment

Job description

Location

Department

Type

Full Time

Job Description

Posted on:

29 OCT 2026

  • Perform inspections as per approved ITP and project requirements
  • Prepare Project Quality Plan (PQP) and Inspection & Test Plans (ITP)
  • Prepare and manage QA/QC procedures, method statements, and quality documents
  • Ensure compliance with NFPA, API, ASME, AWS and ADNOC standards
  • Conduct material receiving inspections (MIR)
  • Verify MTC, test certificates, and approvals (UL/FM if applicable)
  • Check material identification, storage, and preservation
  • Carry out site inspections for:
    • Piping, tank, structural and supports, valves installation
    • Fire protection systems (deluge, sprinkler, foam, fire & gas)
  • Witness and perform testing:
    • Hydrostatic tests
    • Flushing and flow tests
    • Functional and loop checks (F&G systems)
  • Verify welding activities as per approved WPS/PQR
  • Check fit-up, visual inspection, and welding consumables
  • Monitor painting and coating activities (surface prep, Galvanizing, DFT, holiday test, FBE Coating, PQT,Etc.)
  • Raise inspection reports (IR), MIR, and punch points
  • Report non-conformances (NCR)
  • Ensure all measuring and test equipment are calibrated
  • Coordinate with sub contractors, other stakeholders and client inspectors during inspections
  • Maintain daily inspection records and documentation
  • Follow safety and permit requirements during inspection activities

Certification Requirement

  • CSWIP 3.1 or 3.2 welding inspection certification (e.g., AWS CWI)
  • BGAS certification for painting & coating inspection (Added advantage)
  • ISO Internal Auditor certification
  • NDT methods
    • VT ( Mandatory)
    • PT, MT, UT, RT (Advantage)

Additional Requirement

  • Experience in ADNOC Project / EPC Projects
  • Familiar with ADNOC specification and procedures

6-8 years experience in Oil and Gas is Mandatory (Piping, Skid manufacturing, Pressure Vessel, Storage Tank)

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

QA Engineer – Fire Protection (Oil & Gas) - (Office based)
QA Engineer – Fire Protection (Oil & Gas) - (Office based)

SIBCA • Abu Dhabi

On-site
AED 180,000 - 360,000
QA/QC Engineer – Fire Protection | Oil & Gas
QA/QC Engineer – Fire Protection | Oil & Gas

Confidential Company • Abu Dhabi

On-site
AED 180,000 - 260,000
Senior QA/QC Engineer, Fire Protection – Oil & Gas
Senior QA/QC Engineer, Fire Protection – Oil & Gas

Confidential Company • Abu Dhabi

On-site
AED 180,000 - 260,000
Engineer QA/QC
Engineer QA/QC

DESCON ENGINEERING,UAE BU • Abu Dhabi

On-site
AED 300,000 - 420,000
QA/QC Inspector, Welding
QA/QC Inspector, Welding

Ghobash Group • Abu Dhabi

On-site
AED 180,000 - 300,000
QA/QC Inspector, Welding
QA/QC Inspector, Welding

Ghobashgroup • Abu Dhabi

On-site
AED 300,000 - 540,000
QA Engineer - Fire Protection (Oil & Gas, ADNOC EPC)
QA Engineer - Fire Protection (Oil & Gas, ADNOC EPC)

SIBCA • Abu Dhabi

On-site
AED 180,000 - 360,000
Senior QC Engineer
Senior QC Engineer

Maseera • Abu Dhabi

On-site
AED 320,000 - 520,000
QC Inspector
QC Inspector

Proclad Group • Abu Dhabi

On-site
AED 180,000 - 260,000
QA/QC Engineer
QA/QC Engineer

Adearest • Abu Dhabi

On-site
AED 180,000 - 240,000
Top locations