PMC Specialist Process Engineer

EHIF

Abu Dhabi

On-site

AED 350,000 - 550,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical Insurance
Group Life and Personal Accident保险
End of Service Gratuity
Employee Share Plan
Long Service Award
Professional development opportunities
Global connections
Energy Transition Academy

Job summary

Wood in the United Arab Emirates seeks a seasoned PMC Specialist Process Engineer to lead process engineering across design, construction, commissioning, and startup for major offshore or onshore projects.

You will coordinate between client, EPC contractors, and operations to ensure technical integrity, safety and compliance with international standards, while contributing to a lower-carbon energy future.

Qualifications

  • Bachelor of Science degree in Chemical Engineering.
  • Minimum 15 years of oil and gas industry experience.
  • Extensive offshore oil and gas project experience.
  • Excellent written and verbal communication skills.
  • Strong interpersonal skills.
  • Knowledge of international codes and standards.
  • Proficiency with engineering software tools.
  • Ability to make independent decisions in planning and execution.

Responsibilities

  • Lead and coordinate process engineering activities across all project phases.
  • Act as the primary PMC focal point for process engineering among client, EPC, operations, and regulators.
  • Review and verify process design requirements across engineering, procurement, construction, commissioning, and startup.
  • Develop, review, and approve process design philosophies, design basis documents, specifications, and studies.
  • Review process simulations, heat and material balances, P&IDs, and control requirements.
  • Verify process design calculations including hydraulic analyses and equipment sizing.
  • Review and approve process engineering deliverables from EPC contractors.
  • Ensure process requirements are incorporated into equipment specifications and operating procedures.
  • Coordinate interfaces with mechanical, piping, instrumentation, electrical, civil, safety, marine, operations, and commissioning disciplines.
  • Participate in HAZID, HAZOP, SIL, LOPA, and other safety/operability reviews.
  • Provide technical guidance on optimization, debottlenecking, energy efficiency and SAFER design.
  • Support pre-commissioning, commissioning, startup, and handover activities.
  • Deliver progress reports and risk summaries to project leadership and client.

Skills

Written and verbal communication
Interpersonal skills
Codes and standards knowledge
Engineering software proficiency
Independent decision making

Education

Bachelor of Science degree in Chemical Engineering

Job description

The Role

This is an exciting opportunity for an experienced PMC Specialist Process Engineer with a proven track record in the delivering for high-profile middle east clients on major offshore projects.

Our Clients and Projects
Designing the future. Transforming the world.

Wood's Oil, Gas & New Energies business is built on a strong legacy of delivering large and complex projects for national and international energy companies across the globe.We have experienced teams, a proven delivery model and a strong reputation.

We are the market-leading provider of integrated and innovative solutions that challenge the status-quo in the oil and gas upstream and midstream, onshore and offshore, gas to liquids and decarbonisation and electrification markets. We pride ourselves in steady and predictable delivery, setting our sights on an exciting growth trajectory.

Energy security, transition and supply have never been more important. You, our enabling teams, are at the very forefront of transformative projects that are providing sustainable power to generations to come. We are the ones to bring low-carbon concepts to reality.

What we can offer
  • Meaningful and interesting projects:Delivered to high profile clients across the Energy Sector
  • Commitment to Diversity and Inclusion:We are an organisation actively committed to diversity and inclusion across our business
  • Competitive renumeration package:With regular reviews to ensure we are rewarding at the right level in line with the market
  • Medical Insurance: Ensures inpatient, and outpatient medical care is available should you require treatment
  • Group Life and Personal Accident Insurance: The company provides Life Assurance cover
  • End of Service Gratuity:In line with UAE Labor Law, all employees are eligible for an End of Service benefit
  • The Employee Share Plan: Gives you the opportunity to purchase Wood shares and receive a match from the company
  • Long Service Award:Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5 year service milestones
  • Commitment to continued professional development:Development plans that are tailored to your individual needs and interests
  • Global connections: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
  • Energy Transition Academy:Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems – delivered by experts in their field
Job Objective

The PMC Specialist Process Engineer is responsible for providing process engineering expertise throughout the design, construction, commissioning, and operational readiness phases of major offshore or onshore projects under a Project Management Consultancy (PMC) framework. The role ensures that process design, performance, operability, safety, and technical integrity requirements are effectively implemented in accordance with client specifications, approved engineering documents, regulatory requirements, international standards, and project objectives.

Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com

Diversity Statement

We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.

Responsibilities:
  • Lead and coordinate process engineering activities across all project phases, ensuring compliance with approved project requirements, schedules, budgets, and execution strategies
  • Act as the primary PMC focal point for process engineering matters between the client, EPC contractor, engineering disciplines, operations team, commissioning team, and regulatory authorities
  • Review and verify the implementation of process design requirements in engineering, procurement, construction, commissioning, and start-up activities
  • Develop, review, and approve process design philosophies, design basis documents, specifications, studies, calculations, and engineering deliverables
  • Review process simulations, heat and material balances, process flow diagrams, utility flow diagrams, piping and instrumentation diagrams, equipment data sheets, and process control requirements
  • Verify process design calculations, including hydraulic analysis, line sizing, pressure drop, relief and flare system design, equipment sizing, pump and compressor performance, and utility requirements
  • Review and approve process engineering deliverables prepared by EPC contractors, ensuring compliance with project specifications, applicable codes, standards, and client requirements
  • Ensure process requirements are properly incorporated into equipment specifications, piping layouts, control philosophies, cause-and-effect diagrams, operating procedures, and commissioning documentation
  • Coordinate process engineering interfaces with mechanical, piping, instrumentation, electrical, civil, structural, safety, marine, operations, and commissioning disciplines
  • Participate in HAZID, HAZOP, SIL assessment, LOPA, design reviews, model reviews, constructability reviews, operability reviews, and other technical safety and process assurance activities
  • Review process safety and operability aspects of relief systems, flare systems, blowdown systems, shutdown systems, chemical injection systems, separation systems, metering systems, and utility systems
  • Provide technical guidance on process optimization, debottlenecking, energy efficiency, emissions reduction, operability, maintainability, and inherently safer design
  • Review process aspects of temporary facilities, construction activities, SIMOPS, brownfield modifications, shutdowns, tie-ins, pre-commissioning, commissioning, and start-up activities
  • Verify that process operating envelopes, design limits, control requirements, alarm settings, trip settings, and safeguarding functions are properly defined and documented
  • Review and approve process-related method statements, commissioning procedures, operating philosophies, performance test procedures, and system handover documentation
  • Monitor contractor performance and identify deviations, nonconformities, technical queries, design risks, and potential impacts to project cost or schedule, ensuring timely corrective actions and close-out
  • Ensure effective management of process engineering actions, recommendations, assumptions, deviations, technical queries, and risk registers throughout the project lifecycle
  • Participate in vendor technical evaluations, equipment inspections, factory acceptance tests, site inspections, audits, and technical assurance activities where required
  • Support system completion, pre-commissioning, commissioning, start-up, performance testing, handover, and close-out activities, ensuring all process engineering requirements and documentation are completed
  • Provide regular process engineering progress reports, technical updates, risk summaries, and recommendations to project leadership and the client
  • Promote a strong process engineering, technical assurance, operability, and continuous improvement culture across the PMC, client, EPC contractor, and project teams
Qualifications:

What makes you remarkable?

At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.

  • Bachelor of Science degree in Chemical Engineering
  • Minimum of 15 years of relevant experience in oil and gas industry
  • Extensive experience in Oil and Gas Offshore projects
  • Excellent written and verbal communication skills
  • Excellent technical team and interpersonal skills
  • Experience and detailed knowledge of relevant international codes and standards
  • Knowledge of engineering computer programs and general business software
  • Ability to make independent decisions in the planning, organizing and coordinating to develop solutions to complex problems
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

PMC Specialist Process Engineer
PMC Specialist Process Engineer

WOODplc • Abu Dhabi

On-site
AED 300,000 - 520,000
Medical Insurance
End of Service Gratuity
Group Life Insurance
+4
PMC Specialist Project Engineer
PMC Specialist Project Engineer

Wood • Abu Dhabi

On-site
AED 260,000 - 380,000
Medical Insurance
Group Life Insurance
End of Service Gratuity
+4
PMC Technical HSE Specialist
PMC Technical HSE Specialist

EHIF • Abu Dhabi

On-site
AED 300,000 - 540,000
Senior Process Engineer
Senior Process Engineer

EHIF • Abu Dhabi

On-site
AED 350,000 - 650,000
Competitive salary
Ongoing professional development
Global connections
+2
PMC Sr. Interface Engineer – Projects
PMC Sr. Interface Engineer – Projects

EHIF • Abu Dhabi

On-site
AED 380,000 - 600,000
Medical Insurance
Group Life and Personal Accident Insur
End of Service Gratuity
+3
PMC Technical HSE Specialist
PMC Technical HSE Specialist

WOODplc • Abu Dhabi

On-site
AED 446,000 - 781,000
Meaningful projects
Diversity and inclusion
Competitive remuneration package
+8
PMC Technical HSE Specialist
PMC Technical HSE Specialist

John Wood Group PLC • Abu Dhabi

On-site
AED 350,000 - 700,000
Medical Insurance
Group Life Insurance
End of Service Gratuity
+5
PMC Specialist Engineer (Cost/Planning)
PMC Specialist Engineer (Cost/Planning)

EHIF • Abu Dhabi

On-site
AED 500,000 - 700,000
PMC Specialist Construction Engineer
PMC Specialist Construction Engineer

EHIF • Abu Dhabi

On-site
AED 900,000 - 1,200,000
Medical Insurance
Group Life and Personal Accident
End of Service Gratuity
+2
PMC Specialist Engineer (Planning)
PMC Specialist Engineer (Planning)

EHIF • Abu Dhabi

On-site
AED 350,000 - 550,000
Meaningful projects
Diversity and inclusion
Competitive remuneration
+8
Top locations