Role & responsibilities
- Read basic pipe drawings, joint details and welding instructions; verify pipe size, material and joint identification.
- Weld carbon steel pipework up to 10 inch nominal diameter in required positions, including 6G.
- Use the welding process specified by the project and approved welding procedure, such as SMAW or GTAW where applicable.
- Inspect joint preparation, root gap, alignment and cleanliness before welding; coordinate corrections with the fabricator.
- Assist pipe measurement, cutting, bevel preparation and fit-up when required.
- Select and handle welding consumables correctly; use suitable machine settings within the approved procedure.
- Control weld quality, distortion and cleanliness; identify visible defects and perform authorised repairs.
- Present completed welds for visual inspection and specified testing; maintain weld identification and traceability.
- Protect adjacent equipment and maintain safe hot work, fire watch coordination and welding housekeeping.
- Read piping isometrics, dimensions and site layouts; identify required pipe lengths, fittings and valve positions.
- Measure and mark pipes accurately, allowing for fitting dimensions, joint gaps and installation tolerances.
- Cut and bevel carbon steel pipes; remove burrs, scale and contamination before fit-up.
- Prepare and assemble spools, elbows, tees, reducers, flanges and valve connections for welding.
- Align joints, flange bolt holes and branch connections; maintain correct orientation and required pipe slopes.
- Use appropriate clamps and supports; coordinate tack welding with an authorised welder.
- Fabricate and install pipe supports, brackets and hangers to approved details.
- Verify dimensions before welding and installation; identify drawing discrepancies and avoid unauthorised changes.
- Label spools and materials, support inspections, and assist handling, installation and pressure-test preparation.
- Maintain cutting and fabrication tools, material control, housekeeping and safe lifting practices.
Preferred candidate profile
Strong practical pipe welding experience, including 6G and carbon steel pipe sizes up to 10 inches; ability to produce acceptable welds in a practical trade test.
Preferred qualifications and experience
A valid, relevant welder qualification certificate is strongly preferred. Experienced candidates without a current certificate may be assessed and qualified for the project before production pressure-piping welding.