Welding Inspector

E2 Consulting Engineers Inc; Denver (CO); On-site; USD 55,000 - 72,000; Full time

Benefits offered by this job

Health insurance

Dental insurance

Vision insurance

Life insurance

401(k) with employer match

Job summary

E2 Consulting Engineers, LP in Denver is seeking a Certified Welding Inspector to oversee welding procedures, quality, and radiography interpretation per API‑1104 and client specs. You will maintain MTRs, weld maps, and detailed logs to ensure traceability from material receipt to final turnover.

The role requires hands-on site inspection, safety adherence, and communication with the Chief Inspector and Construction Manager. Travel to client sites may be required; U.S.

Qualifications

• Certified Welding Inspector (CWI) with experience in transmission/process piping and API-1104 requirements.
• NACE CIP Level 1 or AMPP Basic Coatings Inspector Certification or equivalent.
• Ability to communicate clearly and prepare concise reports.
• Proficiency with MS Office and weld documentation systems.

Responsibilities

• Inspect welding procedures and ensure welds meet client specifications and applicable codes.
• Maintain logs, MTRs, weld maps, and Material Test Reports for traceability.
• Prepare and submit inspection reports describing work performed.
• Monitor safety on site and coordinate with Chief Inspector and Construction Manager.
• Track materials, heat numbers, and joint data for pipeline construction.
• Ensure compliance with environmental and project requirements.

Skills

CWI Certification

API-1104 experience

Communication

Report writing

MS Office

Teamwork

OQ status

Attention to detail

Tools

WPS

Job description

Welding Inspector

Job Locations US-CO-Denver

• ID: CO-6294
• Category: Inspectors
• Type: Full Time
• Work Location: Onsite

About the Organization

E2 Consulting Engineers, LP (E2) is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas pipeline construction and inspection services, environmental consulting and remediation, and information technology services. At E2, we value safety, innovation and collaboration, and we are dedicated to excellence.

Overview

The Certified Welding Inspector (CWI) inspects and ensures that proper welding and radiographic procedures are qualified and utilized. In addition, the inspector will maintain appropriate documentation, including MTRs, detailed as-builts, and weld mapping. All activities must be performed per client specification and approved for construction drawings, API-1104, and industry standards.

Responsibilities

The Welding Inspector works under the direction of the Chief Inspector, who will assign additional responsibilities to each inspector as needed. The duties assigned to the Welding Inspector will include, but are not limited to, the following:

• Be familiar with the approved construction drawings and Company specifications.
• Understanding the Contract document as it relates to their duties on the project.
• Have a basic understanding of welding techniques, positions, consumables, weld preparation, drawing requirements, and maintain a detailed inspector's logbook.
• Completing and submitting relevant inspection reports that accurately describe the work performed on the project in a manner such that the welds inspected may subsequently be identified per current standards.
• Taking a proactive approach to safety on the job site and reporting safety issues to the Chief Inspector, Construction Manager, and Safety Inspector.
• Plan and organize inspection duties in advance.
• Assure any design changes or material substitutions are discussed with the Construction Manager, Chief Inspector, and proper Company approval is obtained.
• Verify all materials used in the installation comply with Company requirements.
• Keep the Chief Inspector aware of any problems, or anticipated friction points, with the project.
• Possess an understanding of the relationship between quality assurance, quality control, and inspection procedures.
• Verify a welding procedure is established and that each welder is qualified for the work they perform.
• Monitor the quality of the welds performed per the WPS and client specifications to ensure sound welds are completed.
• Assure the repairs made to correct defects in a pipe weld sufficiently corrected the defect, and the weld satisfies the requirements as outlined by the appropriate codes and operator specifications.
• Assure all welding materials are of proper type and quality, they have been stored according to manufacturers' specifications, and damaged materials are not used in the pipe welding.
• Weld Inspector may be assigned additional duties and responsibilities relating to pipeline construction inspection observation and documentation.
• Responsible for tracking all materials used for pipeline construction, including joint numbers, joint lengths, and heat numbers associated with all materials (pipe stock, fittings, etc.).
• Manage and reconcile complex project documentation to maintain complete material and weld traceability, including weld maps, heat numbers, weld numbers, material test reports (MTRs), radiographic testing (RT) reports, repair records, and associated inspection documentation; identify and resolve discrepancies before final turnover.
• Ensure compliance with all project-specific environmental requirements.
• Inform Chief Inspector immediately of any safety or construction deviations or any problems and anticipated problems.

Qualifications

• Position Requires Certified Welding Inspector (CWI) through the American Welding Society with documented and verifiable work experience related to transmission/process piping and API-1104
• Position Requires a minimum of either the National Association of Corrosion Engineers (NACE) Coating Inspection Program (CIP) Level 1 Certification or Association for Materials Protection and Performance (AMPP) Basic Coatings Inspector Certification
• Must be authorized to work in the U.S.
• Obtain Operator Qualification (OQ) status as required by the project
• Other Skills/Abilities
• Must be able to communicate to other team members and client personnel clearly
• Must be able to write clearly and concisely to prepare reports and correspondence
• Skilled with M.S. Office suite
• Strong attention to detail
• Ability to work in a team environment

Benefits

E2 Consulting Engineers, LP offers an excellent benefits package including health, dental, vision, and life insurance, 401(k) with employer match.

Wage Data Per State Requirements

Hourly rate for this position is $46 hour. The starting rate will be commensurate with skill, education, experience, and working environment.

Work Environment/Physical Demands

• Construction Sites and Client Right-of-Way (ROW).
• Client testing facility (occasionally).
• Corporate office (occasionally).
• It may require extensive driving to reach job sites and client/E2 offices.
• There are frequent ascending and descending ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and hands and arms up in and out of pipeline bell-hole / trench/excavation.
• Maintaining body equilibrium to prevent falling and walking, standing, or crouching on narrow, slippery, or erratically moving surfaces.
• Lifting objects over 50 pounds from a lower to a higher position or moving objects horizontally from position to position.
• Possess the ability to perform visual inspection of construction crew quality of work, measuring devices, and assemble fabrication parts at distances close to the eyes.
• Able to perform in both inside and outside environmental conditions in all four seasons throughout the continental United States - extreme cold (temperatures below 32 degrees Fahrenheit) and extreme heat (temperatures above 100 degrees Fahrenheit) for more than one hour.
• Can work extended and overnight shifts without limitations.

Travel

It may require extensive driving to reach job sites and client/E2 offices.

Local Candidates only

No

Application Deadline

We will be accepting applications through 9/30/2026.

Drug Free Workplace

E2 Consulting Engineers, LP is a Drug Free Workplace. After accepting an offer of employment, applicants may be required to undergo background checks, drug testing, and/or fit-for-duty physical examination. Drug screens will include, but not be limited to, Amphetamines, Cocaine Metabolites, Marijuana Metabolites (THC), Opiates, and Phencyclidine (PCP). As a federal contractor, E2 cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician.

Solicitation

Please no solicitation of any kind from agencies, staffing, or recruiting firms.

EEO Statement

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.