Welders - West Bend

Metalcraft of Mayville, Inc.

West Bend (WI)

On-site

USD 42,000 - 65,000

Full time

11 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Metalcraft of Mayville, Inc. in West Bend, Wisconsin is hiring welders for 1st, 2nd and 3rd shifts in an air-conditioned shop.

1st shift options: Mon-Fri 5am-1:30pm or 6am-2pm; 2nd shift 2pm-10pm; 3rd shift Sun-Thu 10pm-6am. Responsibilities include operating MIG and TIG welders, reading blueprints, setting controls for wire feed and amperage, inspecting welded frames, and ensuring quality and safety standards.

Qualifications

  • HS diploma or GED required or equivalent.
  • FANUC Robotic Certification is desired.
  • Certificate or degree in welding is preferred.
  • At least one year welding experience or equivalent education/experience.
  • Successful completion of an internal welding test.
  • Knowledge of welding equipment and tools, including their design, uses, repair, and maintenance.
  • Ability to read and interpret blueprints, welding symbols, safety rules, operating and maintenance instructions.
  • Good communication with coworkers, supervisors and vendors.
  • Must be dependable.

Responsibilities

  • Operate MIG and TIG welding equipment and loads/unloads frames.
  • Set controls for wire feed speed, amperage, polarity, gas type, and welding rod.
  • Inspect welded parts to verify conformance to specs.
  • Read job specifications to determine welding type and material requirements.
  • Maintain clean and safe work area and equipment.
  • Report defective materials or conditions to supervisor.

Skills

Welding experience
Blueprint reading
Math skills
Communication
Dependable

Education

HS diploma / GED
Welding certificate/degree
FANUC Robotic Certification
1 year welding experience

Job description

Overview

Looking for a weld shop that's air conditioned? Ours is! We are busy and growing, with welding openings on 1st, 2nd and 3rd shift at our West Bend facility. 1st Shift Hours are either M-F, 5am-1:30pm or M-F, 6am-2pm. 2nd shift hours are M-F, 2pm-10pm. 3rd shift hours are Sun‑Thurs, 10pm-6am.

If interested in an off shift: 2nd shift includes a $2.50 shift premium. 3rd shift includes a $5.00 shift premium.

Responsibilities
  • Lifts work piece manually or using hoist and secures work piece in fixture or loads automatic feeding device.
  • Calculates and sets controls to regulate machine factors, such as wire feed speed, amperage, polarity, type of gas, and type of weld rod.
  • Starts machine, engages feed, and observes operation.
  • Inspects and measures machined work pieces to verify conformance to specifications.
  • Moves machine controls and guides to adjust machine.
  • Unload welded frames from robotic welder and place on appropriate containers.
  • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
  • Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
  • Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
  • Weld components in flat, vertical, or overhead positions.
  • Replaces worn machine accessories such as cutting tools or brushes.
  • Files, sands, or shapes machined parts..
  • Maintains accurate counts of parts; attaches labels or tags to finished part containers identifying customer, part number, quantity and shop order information.
  • Performs basic MIG and TIG welding techniques as needed.
  • Maintains company quality, efficiency, and productivity standards.
  • Reads job specifications (e.g. blueprints, quality control plans and/or traveler notes) to determine type of welding and material requirements.
  • Uses equipment and supplies to perform work in accordance with operational standards.
  • Examines finished work pieces to verify conformance with specifications according to operator inspection sheet, quality control plans and/or customer notes using instruments such as gauges.
  • Reports defective materials or questionable conditions to the Robotic Welding Manager.
  • Performs prescribed preventative maintenance on equipment and machines.
  • Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.
  • May perform other related duties or work at different workstations as production needs require.
  • Other duties as assigned

Weld. Welder. Welding. Weld. Welder. Welding. Welds. Welds.

Qualifications
  • High School diploma or general education degree (GED);
  • FANUC Robotic Certification is desired
  • Certificate or degree in welding is preferred;
  • At leastone yearwelding experienceOr equivalent combination of education and experience.
  • Successful completion of an internal welding test
  • Knowledge of welding equipment and tools, including their design, uses, repair, and maintenance
  • Knowledge of basic math skills
  • Ability to read and interpret documents like blueprints, welding symbols safety rules, operating and maintenanceinstructions, and procedure manuals.
  • Ability to communicate with co-workers,supervisors and vendors.
  • Must be dependable

Metalcraft of Mayville is an Equal Opportunity Employer:

Minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity

Job Expectations

Equipment Operated: Welder, lifts, robots, cranes.

Physical Demands

Physical Activity:

Activity

N/A

Occasionally

Frequently

Regularly

Average lbs.

Lift/Carry

50

Push/Pull

50

Reach Overhead

Comments: Moderate to heavy physical effort required to perform the basis essentials of the job. Frequently required to bend and stoop. Specific vision abilities required: close vision, peripheral vision, and depth perception and ability to adjust focus.

Climb

Squat/Bend/Kneel

Sit

Stand

Walk/Move About

Occasional: 1-2 hrs/shift Frequently 2-5 hrs/shift Regularly 5-8 hrs/shift

Work Environment

Regularly exposed to varying temperature conditions between 60-100 degrees Fahrenheit, loud noise, moving machinery parts, airborne particles, and fumes from production equipment.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Welders - 1st/2nd/3rd Shift (West Bend)
Welders - 1st/2nd/3rd Shift (West Bend)

Metalcraft of Mayville, Inc. • West Bend (WI)

On-site
USD 25,000 - 39,000
Welders - West Bend
Welders - West Bend

Metalcraft of Mayville, Inc • West Bend (WI)

On-site
USD 40,000 - 60,000
Welders - 1st/2nd/3rd Shift (West Bend)
Welders - 1st/2nd/3rd Shift (West Bend)

Metalcraft of Mayville, Inc • West Bend (WI)

On-site
USD 42,000 - 54,000
Welders -3rd Shift
Welders -3rd Shift

Metalcraft of Mayville, Inc. • Wisconsin

On-site
USD 26,000 - 36,000
Paid Holidays, Vacation, & Birthday
Air Conditioned Facility
$1,000 Signing Bonus
+3
Welders -3rd Shift
Welders -3rd Shift

Metalcraft of Mayville, Inc. • Fall River (WI)

On-site
USD 36,000 - 45,000
Signing bonus
Paid holidays
Vacation
+5
Robotic Welders - 2nd Shift
Robotic Welders - 2nd Shift

Metalcraft of Mayville, Inc. • Wisconsin

Hybrid
USD 30,000 - 41,000
Signing bonus $1000
Paid holidays, vacation & birthday
Air conditioned facility
+4
Welding Lead 1st Shift (West Bend)
Welding Lead 1st Shift (West Bend)

Metalcraft of Mayville, Inc. • West Bend (WI)

On-site
USD 65,000 - 90,000
Welding Lead 1st Shift (West Bend)
Welding Lead 1st Shift (West Bend)

Metalcraft of Mayville, Inc • West Bend (WI)

On-site
USD 60,000 - 85,000
1st Shift Production Supervisor (West Bend)
1st Shift Production Supervisor (West Bend)

Metalcraft of Mayville, Inc • West Bend (WI)

On-site
USD 65,000 - 90,000
Welder
Welder

System One, Inc. • West Bend (WI)

On-site
USD 25,000 - 39,000
Health benefits
Dental coverage
Vision coverage
+1