Welder I (5:00am to 1:30pm) 1st shift

G&W Electric Co.; Bolingbrook (IL); On-site; USD 36,000 - 39,000; Full time

Benefits offered by this job

Medical Insurance

Dental Insurance

Vision Insurance

Disability Insurance

Life Insurance

Tuition Reimbursement

401(k)

Profit Sharing

Paid Vacation

Job summary

G&W Electric is seeking a Welder I to set up and operate welding equipment and atmospheric control systems for high-strength, pressure-ready assemblies.

You will work on a variety of metals, perform Mig/Tig welding, inspect finished work, and maintain safety and quality in a state-of-the-art manufacturing facility in Bolingbrook, IL.

Qualifications

• High School diploma or GED or equivalent work experience.
• At least 1 year of formal welding training or equivalent experience (preferred).
• Able to read and interpret drawings and BOMs.

Responsibilities

• Set up and operate welding equipment and atmospheric control equipment for demanding welds on various metals.
• Assemble and align subassemblies, tack welds, and insure proper fit.
• Perform Mig/Tig welding as required and maintain equipment.
• Document actions and ensure quality before passing to next operation.
• Maintain safe, clean work environment and follow all procedures.

Skills

Welding setup and operation

MIG/TIG welding

Reading drawings/BOM

Safety/compliance

Hand/power tool use

Team training/helping others

Education

High school diploma or GED

Tools

oxyacetylene torch

Measuring tools

Job description

Welder I

In this job you will be responsible for setting up and operating welding equipment together with atmospheric control equipment to perform difficult welding operations on a wide range of metals and alloys for complicated subassemblies and assemblies involving coinciding requirements for high strength, pressure and aesthetics.

As a Welder I you will:

• Assemble, align, square up and tack weld a variety of complicated subassemblies and assemblies using B/Ms, steel tape, straight edge, squarer, clamps, jacks fixtures, templates and similar equipment
• Fit part using torch or carbon arc or hand grinding equipment to facilitate alignment and assembly
• Set up and regulate pressure for oxyacetylene torch
• Select electrode size and type, tips and welding rod or wire as required
• Regulate gas for proper atmospheric control, current and voltage for proper penetration and fusing of metals
• Check and straighten gasket surfaces and grind excess weld from finished work
• Lay out and secure work which may involve heavy parts and assemblies Regulate current and voltage for proper penetration and fusion of similar and dissimilar metals
• Perform Mig/Tig Welding as required
• Perform preventive maintenance procedures as needed
• Provide personal tools as required
• Maintain safe and clean working environment by complying with procedures, rules, and regulations
• Conserve resources by using equipment and supplies as needed to accomplish job results
• Contribute to team effort by training others in performance of welding tasks as needed
• Inspect all work and insure it meets requirements prior to passing it on to the next operation
• Document actions by completing production and quality forms
• Communicate effectively with others at various levels of the organization

We are looking for someone who:

• Holds a High School diploma, GED or equivalent work experience
• Has at least one year of formal welding training or the equivalent level of experience (preferred)
• Has 0-1 years of working experience in a manufacturing environment (preferred)
• Must be able to safety use small hand and power tools, measuring tools, air tools and welding equipment
• Must be able to read and interpret Drawings and Bills of Material
• Must have basic computer skills
• Must be able to perform basic Mig and Tig welding

The physical demands of the job are:

• Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles
• Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%)
• Lifting Demands:
  • Lift up to 75 pounds on an occasional basis floor to waist with assistance
  • Lift up to 40 pounds on a frequent basis floor to waist
  • Carry up to 40 pounds on an occasional basis up to 25 feet
  • Push/Pull up to 40 pounds on a frequent basis
  • Push/Pull more than 40 pounds on an occasional basis with assistance
• Postural Demands:
  • Standing - continuous
  • Walking - continuous
  • Bending/stooping - frequent
  • Squatting/kneeling - frequent
  • Lifting - frequent
• Miscellaneous Demands:
  • Griping, manipulation, fingering -continuous
  • Variable hand/power tool use - frequent
  • Two-person tasks using assistive devices for lifting, pulling and pushing including engine stands hand trucks, pallet jacks, and hoists
  • Must remain medical cleared to wear PAPR or SAR welding respirator helmet

What we offer you:

Pay Range is typically between $26 - $28 per hour.

Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications.

G&W Electric offers a comprehensive benefits package that includes:

• Medical, Dental and Vision Insurance
• Short and Long-Term Disability
• Life Insurance
• Health club membership program and reimbursement
• Employee Assistance Program
• Tuition Reimbursement
• 401 (k)
• Annual Profit Sharing
• Vacation
• Air-conditioned/heated state-of-the-art manufacturing facility

About G&W Electric

Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive.

Learn more about our company by watching this video: https://www.youtube.com/watch?v=DMtAhsdYeUQ

G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world!

G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires.

G&W Electric participates in the E-Verify process for all new hires.

VEVRAA Federal Contractor