Welder Fabricator II/III

Komline; Bowling Green (OH); On-site; USD 42,000 - 54,000; Full time

Job summary

Komline is seeking an experienced Fabricator Welder for its Bowling Green, OH shop. The role is non-supervisory and focuses on welding, cutting, torching, grinding, layout, fabrication, assembly, and material handling.

MIG and Flux Core welding predominate, with a requirement for at least 7 years of fabrication experience and strong safety and quality standards. The ideal candidate will work independently yet collaboratively, reading blueprints, meeting deadlines, and maintaining workmanship in

Qualifications

• At least 7 years of fabrication/manufacturing experience.
• Advanced knowledge of welding, cutting, torching, grinding, fitting, and steel fabrication practices.
• Ability to perform 6G welding on pipe or similar pieces in fixed positions and multiple orientations.
• Ability to read and interpret blueprints and fabrication specifications.
• Strong measuring skills in standard and metric units.

Responsibilities

• Perform advanced MIG and Flux Core welding, cutting, torching, grinding, layout, fabrication, fitting, and assembly work.
• Weld carbon steel, pipe, and structural steel according to job specifications.
• Lay out, fabricate, fit, and assemble steel components and equipment.
• Read and interpret blueprints, drawings, measurements, and fabrication specs.
• Operate shop equipment and material-handling tools safely and efficiently.
• Maintain quality standards and track project time in company systems.
• Support R&D, Engineering, and Service as needed.
• Perform other duties as assigned.

Skills

MIG welding

Flux Core welding

Blueprint reading

6G welding

Independent work

Team collaboration

Safety compliance

Measuring (standard/metric)

Education

High school diploma or GED

Tools

MS Office

Fork truck license

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Full Time Bowling Green, OH, US

2 days ago Requisition ID: 1370

About the Company

Komline is a high-growth private company with operations across ten locations in the US. With a strong track record of rapid expansion and strategic acquisitions, we are growing our team and seeking candidates who excel in a collaborative, entrepreneurial environment to help drive our continued success.

About the Role

We are seeking an experienced Fabricator Welder to join our manufacturing team. This hands-on, non-supervisory role is responsible for welding, cutting, torching, grinding, layout, fabrication, assembly, and material handling in a manufacturing environment. The majority of welding work involves MIG and Flux Core welding. The ideal candidate brings at least 7 years of fabrication experience, strong welding skills, and the ability to work independently while maintaining high standards for safety, quality, and productivity.

What You’ll Do

• Perform advanced MIG and Flux Core welding, cutting, torching, grinding, layout, fabrication, fitting, and assembly work.
• Weld carbon steel, carbon steel pipe, and structural steel according to job specifications.
• Lay out, fabricate, fit, and assemble steel components and manufactured equipment.
• Read and interpret blueprints, drawings, measurements, and fabrication specifications.
• Operate overhead cranes, yard cranes, aerial lifts, drill presses, belt sanders, saws, pipe threaders, and related shop equipment.
• Use forklifts and material-handling equipment to load, unload, and move freight and materials within the plant, as authorized.
• Rig, sling, lift, and position work pieces safely using appropriate equipment.
• Maintain quality standards for fabricated components and finished equipment.
• Track and report project time using the company time and attendance system.
• Support related departments such as Research & Development, Engineering, and Service as needed.
• Perform other duties as assigned.

What We’re Looking For

• At least 7 years of experience in a fabrication manufacturing environment.
• Advanced knowledge of welding, cutting, torching, grinding, fitting, and steel fabrication practices.
• Demonstrated ability to perform welding at a 6G-capable level, meaning the ability to weld pipe or similar work pieces in fixed positions and multiple orientations, including overhead, vertical, and angled positions.
• Ability to weld carbon steel, carbon steel pipe, and structural steel.
• Experience fabricating large or intricate machinery preferred.
• Ability to read and interpret blueprints, drawings, measurements, and fabrication specifications.
• Strong measuring skills, including standard and metric systems.
• Ability to work independently and as part of a team in a non-supervisory role.
• Ability to share job knowledge with team members in a learning-based environment.
• Ability to manage multiple tasks, meet deadlines, and determine priorities.
• Fork truck experience and current fork truck license preferred.
• High school diploma or GED equivalent required.
• Basic knowledge of Microsoft Office, including Word, Excel, and Outlook.

Preferred Strengths

• Strong attention to safety, quality, and detail.
• Ability to stay organized and work under pressure to meet production deadlines.
• Ability to build positive working relationships across departments.
• Willingness to support changing production needs while maintaining workmanship standards.
• Comfortable working in an established shop environment with older equipment, tools, and machinery.

Physical Requirements

• Ability to lift at least 50 pounds.
• Ability to climb, stand, stoop, bend, kneel, and work for extended periods of time.
• Ability to read, write, perform basic math, measure accurately, and interpret fabrication documentation.
• Ability to safely handle tools, materials, and equipment used in fabrication and welding operations.
• This role is primarily performed on a manufacturing shop floor and may include occasional computer-based work.
• The shop floor may involve exposure to typical manufacturing hazards, moving equipment, and changing production conditions.
• The shop includes older equipment, tools, and machinery; candidates should be comfortable working safely and effectively in this type of environment.
• Work surfaces may be slippery, uneven, or unstable.
• Shop temperatures may vary from hot to cold depending on the season.
• The noise level is usually moderate; hearing protection may be required in some areas.

We are an equal opportunity employer. The above information describes the general nature and level of work expected for this position and is not intended to be an exhaustive list of all duties, responsibilities, or qualifications. Additional duties may be assigned as needed.

About the Company

Komline is a high-growth private company with operations across ten locations in the US. With a strong track record of rapid expansion and strategic acquisitions, we are growing our team and seeking candidates who excel in a collaborative, entrepreneurial environment to help drive our continued success.

About the Role

We are seeking an experienced Fabricator Welder to join our manufacturing team. This hands-on, non-supervisory role is responsible for welding, cutting, torching, grinding, layout, fabrication, assembly, and material handling in a manufacturing environment. The majority of welding work involves MIG and Flux Core welding. The ideal candidate brings at least 7 years of fabrication experience, strong welding skills, and the ability to work independently while maintaining high standards for safety, quality, and productivity.

What You’ll Do

• Perform advanced MIG and Flux Core welding, cutting, torching, grinding, layout, fabrication, fitting, and assembly work.
• Weld carbon steel, carbon steel pipe, and structural steel according to job specifications.
• Lay out, fabricate, fit, and assemble steel components and manufactured equipment.
• Read and interpret blueprints, drawings, measurements, and fabrication specifications.
• Operate overhead cranes, yard cranes, aerial lifts, drill presses, belt sanders, saws, pipe threaders, and related shop equipment.
• Use forklifts and material-handling equipment to load, unload, and move freight and materials within the plant, as authorized.
• Rig, sling, lift, and position work pieces safely using appropriate equipment.
• Maintain quality standards for fabricated components and finished equipment.
• Track and report project time using the company time and attendance system.
• Support related departments such as Research & Development, Engineering, and Service as needed.
• Perform other duties as assigned.

What We’re Looking For

• At least 7 years of experience in a fabrication manufacturing environment.
• Advanced knowledge of welding, cutting, torching, grinding, fitting, and steel fabrication practices.
• Demonstrated ability to perform welding at a 6G-capable level, meaning the ability to weld pipe or similar work pieces in fixed positions and multiple orientations, including overhead, vertical, and angled positions.
• Ability to weld carbon steel, carbon steel pipe, and structural steel.
• Experience fabricating large or intricate machinery preferred.
• Ability to read and interpret blueprints, drawings, measurements, and fabrication specifications.
• Strong measuring skills, including standard and metric systems.
• Ability to work independently and as part of a team in a non-supervisory role.
• Ability to share job knowledge with team members in a learning-based environment.
• Ability to manage multiple tasks, meet deadlines, and determine priorities.
• Fork truck experience and current fork truck license preferred.
• High school diploma or GED equivalent required.
• Basic knowledge of Microsoft Office, including Word, Excel, and Outlook.

Preferred Strengths

• Strong attention to safety, quality, and detail.
• Ability to stay organized and work under pressure to meet production deadlines.
• Ability to build positive working relationships across departments.
• Willingness to support changing production needs while maintaining workmanship standards.
• Comfortable working in an established shop environment with older equipment, tools, and machinery.

Physical Requirements

• Ability to lift at least 50 pounds.
• Ability to climb, stand, stoop, bend, kneel, and work for extended periods of time.
• Ability to read, write, perform basic math, measure accurately, and interpret fabrication documentation.
• Ability to safely handle tools, materials, and equipment used in fabrication and welding operations.

Work Environment

• This role is primarily performed on a manufacturing shop floor and may include occasional computer-based work.
• The shop floor may involve exposure to typical manufacturing hazards, moving equipment, and changing production conditions.
• The shop includes older equipment, tools, and machinery; candidates should be comfortable working safely and effectively in this type of environment.
• Work surfaces may be slippery, uneven, or unstable.
• Shop temperatures may vary from hot to cold depending on the season.
• The noise level is usually moderate; hearing protection may be required in some areas.

We are an equal opportunity employer. The above information describes the general nature and level of work expected for this position and is not intended to be an exhaustive list of all duties, responsibilities, or qualifications. Additional duties may be assigned as needed.

Monday-Friday 6 AM to 2:30 PM; OT as needed and available.