Welder

Kerrville; Texas; On-site; USD 22,000 - 25,000; Full time

Job summary

The Kerrville Area Chamber of Commerce is seeking a Welder responsible for TIG and MIG welding of aluminum and steel parts. The role emphasizes safety, accuracy, and timeliness in the welding area, including proper PPE use and adherence to weight and lifting guidelines.

Essential duties include planning work orders, fabricating items, and maintaining equipment. Candidates should have TIG and MIG welding experience and the ability to work in a semi-routine warehouse environment, with a focus on

Qualifications

• Must have welding experience using TIG and MIG welding.
• Must be able to operate welding equipment safely and accurately.
• Ability to follow detailed work orders and safety rules.

Responsibilities

• Plans details of work order procedures and gathers required tools and materials.
• Repairs and fabricates items using cutting, burning, and welding techniques.
• Prepares, assembles, and tacks weld parts and surfaces to be welded.
• Maintains, organizes, and cleans equipment and the work area.
• Must wear welding helmet, gloves, apron, and safety glasses at all times.

Skills

Safety procedures

Manual dexterity

Education

TIG Welding

MIG Welding

Welding Experience

Job description

SUMMARY

The Welder's primary responsibility is TIG and MIG welding of aluminum and steel parts. Each job must be run with safety, accuracy, and timeliness in the welding area.

ESSENTIAL DUTIES AND RESPONSIBILITIES

include the following:

DEPARTMENTAL DUTIES

• Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job.
• Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment.
• Prepares, assembles, and tacks weld parts and surfaces to be welded.
• Maintains, organizes, and cleans equipment and the work area.
• Employee will not lift by self any items over 50lbs, you will ask for assistance.
• You will familiarize yourself with proper lifting and turning procedures using legs –not your back.
• Must be able to properly and safely operate machinery, as trained and authorized to do so by the company.
• Do not use machinery that you are not familiar with and have not been instructed in proper use techniques.
• Welding helmet, gloves, apron, and safety glasses MUST be worn at all times.
• Hearing protection MUST be used in any high noise areas, welding, grinding, hammering, air press, and cutting areas.
• DO NOT look at the welding area with naked eyes, as even a glace can cause damage. Always wear properly approved safety glasses to view the welding arc.
• You must wear an N95 dust/mist respirator mask when welding, cutting or grinding.
• You must wear rubber sole – leather type work shoes (no sneakers). Full-length pants and long sleeves shirts with forearms protectors (or) suitable welding jacket (or) welding apron and sleeves (no sleeveless shirts permitted).
• Performs other related duties as assigned.
• Pay attention to the machine you are operating & make sure it is operating properly. Notify your supervisor as soon as you notice the machine not operating properly.
• If at any time you are unsure what to do or use ask your supervisor.
• Other duties may be required

SUMMARY

The Welder's primary responsibility is TIG and MIG welding of aluminum and steel parts. Each job must be run with safety, accuracy, and timeliness in the welding area.

ESSENTIAL DUTIES AND RESPONSIBILITIES

include the following:

DEPARTMENTAL DUTIES

• Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job.
• Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment.
• Prepares, assembles, and tacks weld parts and surfaces to be welded.
• Maintains, organizes, and cleans equipment and the work area.
• Employee will not lift by self any items over 50lbs, you will ask for assistance.
• You will familiarize yourself with proper lifting and turning procedures using legs –not your back.
• Must be able to properly and safely operate machinery, as trained and authorized to do so by the company.
• Do not use machinery that you are not familiar with and have not been instructed in proper use techniques.
• Welding helmet, gloves, apron, and safety glasses MUST be worn at all times.
• Hearing protection MUST be used in any high noise areas, welding, grinding, hammering, air press, and cutting areas.
• DO NOT look at the welding area with naked eyes, as even a glace can cause damage. Always wear properly approved safety glasses to view the welding arc.
• You must wear an N95 dust/mist respirator mask when welding, cutting or grinding.
• You must wear rubber sole – leather type work shoes (no sneakers). Full-length pants and long sleeves shirts with forearms protectors (or) suitable welding jacket (or) welding apron and sleeves (no sleeveless shirts permitted).
• Performs other related duties as assigned.
• Pay attention to the machine you are operating & make sure it is operating properly. Notify your supervisor as soon as you notice the machine not operating properly.
• If at any time you are unsure what to do or use ask your supervisor.
• Other duties may be required

GENERAL EXPECTATIONS

• Must have welding experience using Tig/Mig Welder and adjusting amps on the welding machine.
• Must be able to use 1-2 lbs. hammer.
• Must be physically able to lift 50lbs.
• Must be able to perform the job in a standing position for a length of shift.
• This is semi-strenuous work requiring good correct vision, lifting, stooping, kneeling, bending, reaching, pulling, tuning, and walking from one workstation to another.
• All safety procedures must be followed and equipment worn properly.

SUPERVISORY RESPONSIBILITIES

None.

QUALIFICATIONS: T

o perform this job successfully, an individual must be able to perform each essential duty satisfactorily in accordance with established standards and quality. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

• MIG: 1 year (Required)
• Welding: 2 years (Preferred)
• TIG Welding: 1 year (Required)
• A strong sense of dedication to your work.
• A good work ethic.
• Detail oriented.
• Tenaciously work towards daily, monthly & annual department and company goals & objectives.
• An amenable personality with the ability to self-motivates and works towards a vision or goal.
• Ability to prioritize.
• Be able to take direction, both verbally and written.
• Ability to work with others.

LANGUAGE SKILLS

Ability to speak and read in either English or Spanish.

MATHEMATICAL SKILLS

Posses basic mathematical skills.

REASONING ABILITY

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Be able to ask for further direction or help when not sure of what to do or is being asked of you.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regular use of hands to finger, handle or feel and reach with hands and arms (waist level).

Must be able to lift, move, carry, push and pull up to 50 lbs.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job in a warehouse or light manufacturing environment.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is exposed to moving mechanical equipment and an environment and noise level consistent with light industrial manufacturing. The noise level in the work environment is usually moderate. Occasional exposure to moving mechanical parts. Occasional exposure to cold or hot weather.

Job Type

Full-time

Pay

$16.00 to $18.00 per hour

Expected hours

40 per week

Additional Postings available from OW Lee Co