VTL Machinist - 2nd Shift

Karman Space & Defense

Brea (CA)

On-site

USD 34,000 - 39,000

Full time

1 hour ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Medical insurance
Company 401(k)
PTO
HSA
FSA
Life/AD&D insurance
Disability

Job summary

Karman Space & Defense in California is seeking a skilled CNC operator to run vertical turning lathes (VTL) and support the production of high‑precision hardware.

You will prepare tooling, coordinate with programmers and management to maintain workflow, and ensure compliance with the QMS and safety requirements.

This role requires strong attention to detail, reliability, and the ability to communicate with internal customers in a fast‑paced aerospace environment.

Qualifications

  • Strong attention to detail and ability to work with all levels of management.
  • Experience with Siemens 840D and Fanuc 31i-B5 controls.
  • Thorough understanding of machine setups, tooling, and cutters.
  • Ability to communicate directly with internal customers.
  • Training in applicable changes and customer requirements.
  • Knowledge of basic QMS reporting, record keeping, and instruction following.
  • High school diploma or equivalent.
  • Adequate years of CNC operating experience as determined by Karman.

Responsibilities

  • Maintains AS9100 procedures and supports continuous improvement initiatives.
  • Keeps the work area clean, organized, and aligned with safety expectations.
  • Performs general CNC machine cleaning and maintenance.
  • Maintains and stores machine fixtures properly.
  • Works with management to prioritize the machine schedule.
  • Collaborates with programmers to minimize setup and production time.
  • Orders cutters and tooling required for manufacturing.
  • Operates CNC machinery to produce components.
  • Reports quality or time‑management concerns to management.
  • Understands how customer products are impacted in the event of failure and adheres to product safety expectations.
  • Performs other duties as required.

Skills

Attention to detail
Effective communication
CNC operation
QMS knowledge
Machine setups
Tooling & cutters
Safety compliance

Education

High school diploma or equivalent

Tools

Siemens 840D
Fanuc 31i-B5

Job description

Karman Space & Defense is a leader in the rapid design, development, and production of critical, next‑generation system solutions that align with the U.S. Department of War and its allies’ core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.

This role is part of our Space and Launch business, which has contributed to the nation’s space programs for decades by delivering complete solutions from concept to flight. We enable successful space operations with mission‑critical technology supporting every step from first launch to final landing, including launch vehicle subsystems, propulsion systems, aerodynamic and interstage systems, and payload protection and deployment. Our high‑performance solutions are engineered to operate in the most extreme environments and meet precise mission requirements.

In this role, you operate vertical turning lathe (VTL) computer numerical control (CNC) machines to support efficient production of high‑precision hardware. You prepare tooling and materials, coordinate with programmers and management to maintain workflow, and uphold quality management system (QMS) requirements to ensure product conformity and safety.

Responsibilities
  • Maintains AS9100 procedures and supports continuous improvement initiatives.
  • Keeps the work area clean, organized, and aligned with safety expectations.
  • Performs general CNC machine cleaning and maintenance.
  • Maintains and stores machine fixtures properly.
  • Works with management to prioritize the machine schedule.
  • Collaborates with programmers to minimize setup and production time.
  • Orders cutters and tooling required for manufacturing.
  • Operates CNC machinery to produce components.
  • Reports quality or time‑management concerns to management.
  • Understands how customer products are impacted in the event of failure and adheres to product safety expectations.
  • Performs other duties as required.
Required Qualifications
  • Strong attention to detail, organizational skills, and communication abilities, with the ability to work effectively with all levels of management.
  • Experience with Siemens 840D and Fanuc 31i‑B5 controls.
  • Thorough understanding of machine setups, tooling, and cutters.
  • Ability to communicate directly with internal customers.
  • Training in applicable changes and customer requirements.
  • Knowledge of basic QMS reporting, record keeping, and instruction following.
  • High school diploma or equivalent.
  • Adequate years of CNC operating experience as determined by Karman.
Physical Requirements
  • Constant standing, walking, or sitting for at least 8 hours.
  • Occasional pushing, pulling, lifting, or carrying up to 50 pounds, minimum 35 pounds.
  • Sufficient hand, arm, and finger dexterity to operate a keyboard and other equipment.
  • Clarity of vision at approximately 20 inches or less; corrective lenses may be worn.
  • Prolonged repetitive movements.
  • Constant holding, grasping, turning, or similar hand operations.
  • Occasional reaching overhead, at shoulder level, and below shoulder level. The essential functions of this position must be performed with or without reasonable accommodation.

This position requires U.S. person status under U.S. export control laws, including U.S. citizens and nationals, lawful permanent residents, refugees, and asylees.

  • Medical, dental, and vision insurance
  • 401(k) with company match
  • Paid time off
  • Health Savings Account (HSA) with company contribution
  • Flexible Spending Accounts (FSA)
  • Company‑paid life and AD&D insurance
  • Short‑ and long‑term disability coverage
Hourly Rate

$25 - $28 USD

Karman Space and Defense is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, or any other status protected by applicable federal, state, or local law.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Machinist - 1st Shift
CNC Machinist - 1st Shift

Karman Space & Defense • Mukilteo (WA)

On-site
USD 45,000 - 58,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
CNC Machinist 5 Axis - 2nd Shift
CNC Machinist 5 Axis - 2nd Shift

Karman Space & Defense • Santa Ana (CA)

On-site
USD 37,000 - 41,000
Medical insurance
401(k)
Paid time off
+5
Machine Maintenance Technician
Machine Maintenance Technician

Karman Space & Defense • South El Monte (CA)

On-site
USD 48,000 - 69,000
Health insurance
Dental insurance
Vision insurance
+6
CNC Machinist - Lathe - 2nd Shift
CNC Machinist - Lathe - 2nd Shift

Karman Space & Defense • Santa Ana (CA)

On-site
USD 37,000 - 41,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+1
CNC Operator II
CNC Operator II

Karman Space & Defense • Arlington (WA)

On-site
USD 60,000 - 90,000
Health insurance
Dental insurance
Vision insurance
+6
CNC 5 Axis Machinist - 2nd Shift
CNC 5 Axis Machinist - 2nd Shift

Karman Space & Defense • Corona (CA)

On-site
USD 62,000 - 94,000
Medical, dental, vision insurance
401(k) with company match
Paid time off
+4
CNC Machinist - 2nd Shift
CNC Machinist - 2nd Shift

Karman Space & Defense • Salt Lake City (UT)

On-site
USD 30,000 - 55,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+5
Machine Shop Helper - 1st Shift
Machine Shop Helper - 1st Shift

Karman Space & Defense • Corona (CA)

On-site
USD 26,000 - 30,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
CNC Operator
CNC Operator

Karman Space & Defense • Arlington (WA)

On-site
USD 48,000 - 55,000
Medical, dental, vision insurance
401(k) with company match
Paid time off
+4
CNC Machinist - 1st Shift
CNC Machinist - 1st Shift

Karman Space & Defense • Seattle (WA)

On-site
USD 45,000 - 58,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4