U103 TESTER C TURBINES

Northrop Grumman

Sunnyvale (CA)

On-site

USD 90,000 - 120,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Northrop Grumman in Sunnyvale, CA is seeking an Assembly Helper/Tester to prepare and connect apparatus for static turbine tests, mounting components, hoses and piping, and operating test stands to verify performance.

You will read specifications, follow safety procedures, maintain test data records, and support other testers. A high school diploma and experience with industrial fluid systems are required; ability to obtain a US government Secret Clearance is preferred.

Qualifications

  • High school graduate with experience in industrial fluid systems.
  • Experience with pumps, valves, steam generating equipment, and water treatment units.
  • Ability to obtain and maintain required U.S. Government Secret Clearance.

Responsibilities

  • Assemble and prepare apparatus for static tests and operate test facilities.
  • Position, mount, and connect components and piping for testing turbines and auxiliaries.
  • Monitor test stands and maintain specified pressures, temperatures, and flows.
  • Maintain clean work area and record data and time charges.

Skills

MS Outlook
Word
Excel

Education

High School Diploma or GED

Tools

Pumps
Valves
Steam generating equipment

Job description

RELOCATION ASSISTANCE: No relocation assistance availableCLEARANCE REQUIRED FOR START: NoCLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.PRIMARY FUNCTION:Prepare and connect apparatus for tests and operate test facilities and controls to perform static tests on a variety of turbine and auxiliary products where methods, sequences and tooling are normally established. Work with and/or assist journey level testers as required. Qualify, secure, and maintain a security clearance for all tester functions.TOOLS AND EQUIPMENT:Steam generating facility and supporting auxiliary subsystems including Johnson Matthey SCR, demin system, air ejector, Hagan controls, water brake, test stands, tooling, fixtures, pumps, valves, component test equipment. Precision gauges such as pressure, temperature and speed indicators. Electric, flow, hydraulic and vibration recorders. Manual hydraulic and electric hand tools.MATERIAL:Turbines, gearboxes, oil sumps, forced draft flowers, heat exchangers, turbine generators, valves and control equipment, hardware, water, oil, sulfuric acid, salt, caustic soda, treatment chemicals, rust inhibitor, preservatives, test kits, paper, rags, tape.DIRECTION OF OTHERS: Assist and/or direct support personnel assigned to help in the performance of the test department.WORKING PROCEDURE:THE FOLLOWING ARE THE USUAL MAJOR JOB DUTIES BUT THIS DESCRIPTION DOES NOT PRECLUDE THE PERFORMANCE OF OTHER DUTIES BY THE INCUMBENT, NOR THE QUESTION BEING RAISED ON THE PROPER RATE FOR THE ASSIGNMENT.Perform the duties of Assembly Helper and in addition perform the following:Receive work assignment from supervision and instruction from Test Engineer.Read and follow safety regulations and procedures and MI package including drawings, change notices, operation sheets, specifications and work authorizations.Position and mount apparatus on pedestals and stands, assemble and bolt together components, tests plates, adapters, fixtures, hoses, fittings and piping. Cut and install gaskets as necessary and connect specified steam, water, air and oil lines and gauges for static testing turbines and auxiliary components. Disassemble after testing is completed.Start, operate and monitor test facilities such as pumps, valves, low pressure steam generating equipment and associated auxiliaries (feed water system, cooling water and condensate system, etc.) heat exchangers and water treatment units to maintain the power, steam, water and oil required to static test products.Operate test stand controls to maintain specified pressures, temperatures, and flows to static test a variety of products. Visually check for leaks during test and continually review test data to ensure results are within the parameters of the specification and operating policies.Start and operate pickling equipment to clean various castings, fabrications and parts.Assemble and connect products for testing, operate controls, and assist in conducting routine dynamic tests of products under the direction of a higher-level tester.Maintain inventory of instruments and gauges and have them calibrated at specified times.Observe safe operating practices and maintain familiarity with emergency shutdown procedures.Make proper time charge entries and record data as required.Maintain tools, equipment and work area in a clean and orderly condition.Perform other work of equal or lower classification as required.This is a Union Represented position.BASIC QUALIFICATIONS:High School Diploma or equivalent GED.Experience with the operation of commercial and/or industrial fluid systems, such as fluid, hydraulic, steam, air, and Electrical Systems.Experience operating and monitor equipment such as pumps, valves, low pressure steam generating equipment and associated auxiliaries (feed water system, cooling water, and condensate system, etc.) heat exchangers and water treatment units to maintain the power, steam, water, and oil required to static test product.Experience adhering to OSHA safety requirements, regulations, procedures and LOTO (Lockout/Tagout).Experience utilizing MS Outlook email, creating word documents, entering data excel spreadsheets.Ability to obtain and maintain required U.S. Government Secret Clearance is required.US Citizenship is required.PREFERRED QUALIFICATIONS:Large test facility experience.Current/active Stationary Operating Engineer license.Minimum of 4 years of experience with steam plant operations either onboard a U.S. Navy vessel or within a commercial facility.Active U.S. Government Secret Clearance.Minimum of 4 years of experience troubleshooting and resolving large steam plant equipment.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

U103 TESTER C TURBINES
U103 TESTER C TURBINES

Northrop Grumman • Sunnyvale (CA)

On-site
USD 85,000 - 110,000
Test Engineer Level 2/3
Test Engineer Level 2/3

Northrop Grumman • Sunnyvale (CA)

On-site
USD 92,000 - 171,000
Overtime
Shift differential
Discretionary bonus
+1
Noise Vibration and Harshness Engineer Level 2/3
Noise Vibration and Harshness Engineer Level 2/3

Northrop Grumman • Sunnyvale (CA)

On-site
USD 92,000 - 138,000
Relocation assistance
Life insurance
Disability insurance
+1
Systems Test Engineer or a Principal systems test engineer.
Systems Test Engineer or a Principal systems test engineer.

Northrop Grumman • Palmdale (CA)

On-site
USD 83,000 - 150,000
Relocation assistance
U103 ASSEMBLER/TESTER C
U103 ASSEMBLER/TESTER C

Northrop Grumman • Sunnyvale (CA)

On-site
USD 34,000 - 48,000
U105 Inspector B
U105 Inspector B

Northrop Grumman • Middle River (MD)

On-site
USD 55,000 - 75,000
U103 NDT Inspector A
U103 NDT Inspector A

Northrop Grumman • Sunnyvale (CA)

On-site
USD 70,000 - 95,000
Acoustic Analyst level 2/3
Acoustic Analyst level 2/3

Northrop Grumman • Sunnyvale (CA)

On-site
USD 92,000 - 171,000
Health insurance
Life insurance
Disability insurance
+3
U105 Manufacturing Operations Maintenance Technician - 4th Shift
U105 Manufacturing Operations Maintenance Technician - 4th Shift

Northrop Grumman • Middle River (MD)

On-site
USD 65,000 - 90,000
U105 Inspector B
U105 Inspector B

Northrop Grumman • Elkridge (MD)

On-site
USD 60,000 - 90,000