U103 PAINTER

Northrop Grumman

Sunnyvale (CA)

On-site

USD 55,000 - 75,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Northrop Grumman is seeking a painting technician in Sunnyvale, CA to set up and operate spray-painting equipment for coatings on components. You will ensure uniform texture and thickness and work under union representation. US citizenship is required.

The role emphasizes safety, blueprints interpretation, and precise coating application with inline curing and inspection steps.

Qualifications

  • High School Diploma or GED required.
  • 2 years painting experience in Aircraft, Military, Marine, or Automotive sectors.
  • Experience interpreting blueprints, sketches, and manufacturing instructions.
  • Ability to perform and pass an onsite painting skill assessment.
  • US citizenship is required.

Responsibilities

  • Receive work assignment from supervision.
  • Read safety regulations and MI package including drawings and specs.
  • Mix, strain and thin various coatings; check temp and viscosity.
  • Assemble hoses, valves, spray gun, and set air pressure and spray pattern.
  • Operate spray equipment or brush to apply primers, finishes and coatings with uniform thickness.
  • Operate infrared heat lamps to cure coatings.
  • Touch up and rework final coatings by sanding and feathering surfaces.
  • Check coating uniformity and thickness for spec compliance.
  • Operate lifting equipment to move material in painting area.
  • Maintain tools and clean work area; notify when materials are depleted.
  • Sign off operations and obtain first piece and final inspection.
  • Make time charge entries and record data.
  • Perform other work of equal or lower classification.

Skills

Painting experience
Blueprints interpretation
Safety regulations

Education

High School Diploma or GED

Tools

Graco spray equipment
Polyurethane finishes

Job description

RELOCATION ASSISTANCE: No relocation assistance available

CLEARANCE REQUIRED FOR START: No

CLEARANCE TYPE: None

TRAVEL: Yes, 10% of the Time

Description

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.

PRIMARY FUNCTION

Set up, operate and adjust manual spray-painting equipment to apply a wide variety of coatings to components and apparatus with a uniform texture, appearance and thickness.

TOOLS AND EQUIPMENT

Spray guns, pressure pots, pumps, gauges, regulators, hose; spray booths, power sanders, steam cleaner pump paint mixer, respirator, protective clothing, floor operated crane, brushes, demller cup, film thickness gauge, pliers, wrenches, screwdriver, hammers, scissors, and thermometer.

MATERIAL

Modules, shipping containers, gears, assemblies and parts of ferrous and nonferrous metals, wood, hardware, lacquers, varnishes, solvents, adhesives, thinners, epoxies catalysts, sandpaper, rags, masking paper and tape.

WORKING PROCEDURE

THE FOLLOWING ARE THE USUAL MAJOR JOB DUTIES BUT THIS JOB DESCRIPTION DOES NOT PRECLUDE THE PERFORMANCE OF OTHER DUTIES BY THE INCUMBENT, NOR THE QUESTION BEING RAISED ON THE PROPER RATE OF PAY FOR THE ASSIGNMENT.

  • Receive work assignment from supervision.
  • Read and understand safety regulations and MI package including drawings, change notices, operation sheets, specifications and work authorizations.
  • Mix, strain and thin a variety of coatings. Check and adjust temperature and viscosity as required.
  • Assemble hoses, valves, agitator, pots, spray gun, tips, etc. and set proper air pressure, fluid flow and spray pattern to obtain proper atomization.
  • Operate spray equipment or use a brush to uniformly apply a variety of primers, finishes, and coatings to exacting thickness tolerances on various parts without runs, sags, pinholes or flaws. (Coatings normally have a limited pot life and recoating time.) Operate infrared heat lamps to cure coatings.
  • Touch up and rework final finish coatings by sanding, filling and feathering scratched and damaged areas to make surfaces uniform in texture, appearance and‑thickness.
  • Check coating for uniformity of texture, thickness and appearance to ensure compliance with specifications.
  • Operate lifting and handling equipment to move material in the painting area.
  • Maintain tools, equipment and work area in a clean and orderly condition and notify supervision when painting materials are depleted. Clean equipment thoroughly after each use by flushing lines, guns, tips and tanks.
  • Sign off operations completed and obtain first piece and final inspection sign off on operation sheets as required.
  • Make proper time charge entries and record data as required.
  • Perform other work of equal or lower classification as required.

This is a Union Represented position.

MPR
Basic Qualifications
  • High School Diploma or equivalent GED.
  • 2 years of experience in Aircraft, Military, Marine, or Automotive Painting.
  • Operational knowledge of, and work experience with, Automatic/Manual Spray equipment and materials, such as Graco, polyurethane products, and similar finishes.
  • Work experience with interpreting blueprints, sketches, and manufacturing instructions.
  • Ability to perform and pass an onsite painting skill assessment.
  • US citizenship is required.
Preferred Qualifications
  • Prior work experience in Aircraft, Military, Marine, Naval or Automotive painting.
  • Documented experience and ability to operate cranes and forklifts.
  • Documented work experience with data entry in SAP and MRP systems.
  • User experience creating, saving, sharing, and manipulating docs within the Microsoft Office Suite to include Word, and/or Excel.

The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.

Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

U103 PAINTER
U103 PAINTER

0090 CORP-Corporate Office • United States

On-site
USD 45,000 - 75,000
SR PAINTER/COATINGS TECH
SR PAINTER/COATINGS TECH

Northrop Grumman • Annapolis (MD)

On-site
USD 54,000 - 130,000
Health Plan
Savings Plan
Paid Time Off
+1
SR PAINTER/COATINGS TECH
SR PAINTER/COATINGS TECH

0090 CORP-Corporate Office • United States

On-site
USD 54,000 - 130,000
Health plan
Savings plan
Paid time off
+2
Aircraft Painter Entry/ Aircraft Painter Level 1
Aircraft Painter Entry/ Aircraft Painter Level 1

Northrop Grumman • Palmdale (CA)

On-site
USD 25,000 - 28,000
U103 ASSEMBLER/TESTER C
U103 ASSEMBLER/TESTER C

Northrop Grumman • Sunnyvale (CA)

On-site
USD 34,000 - 48,000
Aircraft Low Observable Mechanic 3/4
Aircraft Low Observable Mechanic 3/4

Northrop Grumman • Edwards Air Force Base (CA)

On-site
USD 67,000 - 111,000
Overtime opportunities
Discretionary bonus
Comprehensive benefits
Painter (Aerospace) - 2nd or 3rd Shift
Painter (Aerospace) - 2nd or 3rd Shift

National Aerospace Processing • Stow (OH)

On-site
USD 40,000 - 62,000
Retirement savings plan with company-m
Wellness allowance $350
Up to 5 weeks paid-time off
+1
Painter (Aerospace)
Painter (Aerospace)

National Aerospace Processing • Stow (OH)

On-site
USD 28,000 - 34,000
Aircraft Low Observable Mechanic 3/4
Aircraft Low Observable Mechanic 3/4

Northrop Grumman • California

On-site
USD 67,000 - 132,000
Relocation assistance may be available
Overtime eligibility
Discretionary bonus
Aircraft Low Observable Mechanic 3/4
Aircraft Low Observable Mechanic 3/4

Northrop Grumman • Palmdale (CA)

On-site
USD 67,000 - 111,000
Relocation assistance may be available