Tooling Technician - 2nd Shift (3 PM - 11:30 PM)

Magna International; South Carolina; On-site; USD 52,000 - 66,000; Full time

Job summary

Magna Mechatronics, Mirrors & Lighting in Duncan, South Carolina, seeks a Tooling Technician for a 2nd shift (3 PM – 11:30 PM) to support mold servicing, tool changeouts, and maintenance for production readiness.

You will work closely with the Shift Engineer, fabricate and repair tooling and molds, read blueprints, operate measuring equipment, follow safety and ISO procedures, and document maintenance activities while maintaining a clean, safe workspace.

Qualifications

• High School diploma or equivalent; ability to learn quickly.
• Demonstrated mechanical aptitude with ability to read and interpret blueprints/schematics.
• Able to use measuring tools (micrometers, calipers, dial indicators) and read decimals/ fractions.

Responsibilities

• Repair and service molds to ensure tools are available for production on time.
• Fabricate tools, machine parts, fixtures and gauges with lathe, mill, drill press, welder and other tools.
• Read blueprints/schematics to plan/set-up equipment, and operate measurement devices to verify tolerances.
• Maintain 5-S in Chemical Storage Areas and workplace; update data bases and paperwork.
• Follow safety procedures, use PPE, and report hazards or incidents; perform startup/shutdown tasks as required.

Skills

Mechanical aptitude

Blueprint reading

Measuring tools use

Reading micrometers/calipers

Problem solving

Communication

Mold servicing

Disassembly/reassembly of molds

Overhead crane operation

Safety compliance

Education

High School diploma or equivalent

Tools

Lathe

Milling

Drill press

Welding equipment

Overhead crane

Job description

Tooling Technician - 2nd Shift (3 PM - 11:30 PM)This site uses cookies from MAGNA and third parties for our own business purposes and to personalize your experience. By using this site, you agree to the use of cookies. For more information, visit MAGNA Cookies Policy### Tooling Technician - 2nd Shift (3 PM - 11:30 PM)Apply: Duncan, South Carolina, US: Full time: Posted Today: R00270233**Job descriptions may display in multiple languages based on your language selection.**## **What we offer:**At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are.## ## ## **Group Summary:**Magna Mechatronics & Mirrors develops intelligent access and vision systems that enhance vehicle safety, functionality, and user interaction. As a global automotive supplier and full-system partner, Magna brings together expertise across Mechatronics and Mirror systems to deliver integrated solutions that support the evolution of vehicle architectures.**Job Responsibilities:**JOB SUMMARY:Repair Molds, coordinate the maintenance of and change out tools and molds as needed. Also, includes the proper tagging and storing of molds. Work may involve irregular work schedules and exposure to chemicals, high voltage from electrostatic equipment, loud noise, heavy moving of equipment/machinery, and/or work in high places and confined spaces. Work on special projects requiring hands-on mechanical aptitude. Will work with the EM/Technician to install or integrate new or changed components.ESSENTIAL JOB DUTIES AND RESPONSIBILITIES:* Work together with team in a flexible manner to achieve maximum productivity throughout the shift, liaising with the Shift Engineer to resolve problem areas.* To carry out mold servicing and repair to the required standard and timing to ensure tools are available for production on time and to plan.* Fabricates tools, machine parts, fixtures and gauges with or without sketches and prints using lathe, mill, drill press, welder and other tools. Operates testing equipment, power tools, hand tools, torches, welders and precision measuring instruments.* Completes appropriate paperwork, machine documentation, and preventative maintenance records, updates data bases and retrieves information.* Performs housekeeping duties and maintains facilities including cleaning, organizing, disposal of grease/fluids, etc.* Maintenance and 5-S in Chemical Storage Areas and workplace.* Follows procedures pertaining to safety and/or hazardous waste handling, which includes prescribed lock out procedures when working on equipment to prevent injury.* Performs startup/shutdown of machines as required by the MCL.* Performs other duties as necessary. Properly handles and disposes of any hazardous waste material in respective areas. May train other staff.* Understand your responsibility for health and safety in the workplace. Cooperate with OSHA inspectors. Wear the appropriate personal protective equipment. Follow all safety rules. Report unsafe conditions immediately. Report injuries, accidents, illnesses, near misses, property damage immediately. Will not remove or make ineffective any protective device such as a guard, light curtain, etc. Will not use or operate any machine or equipment that the employee is not trained to operate. Will not use or operate any machine or equipment in a manner that may endanger any employee including themselves.* Understand your responsibility for health and safety in the workplace. Provide an employee with written instructions of the measures and procedures required to protect the employee. Advise the employee of the existence of any potential or actual danger to the health or safety of the employee of which the supervisor is aware. Understand your responsibility for visitors and general public health and safety in the workplace. Cooperate with OSHA inspectors. Do not allow discrimination against employees who properly exercise their right under OSHA. Use appropriate Personal Protective Equipment to set a good example. Ensure that employees wear the appropriate protective devices. Know the safety rules at Magna Mirrors - South Carolina.* Understand your responsibility to the environmental programs, including ISO14001. Understand the importance of conformance with all environmental procedures of the environmental management system, including emergency response. Understand the EMS consequences, actual or potential, of their work activities and/or their behaviors from specified work instructions.* Understands and follows existing Magna policies, procedures, work instructions and standards and makes recommendations for continuous improvements.REQUIREMENTS:To perform this job successfully, an individual must be able to perform essential duties satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.* High School diploma or equivalent with the ability to learn quickly. Basic math/reading skills including using decimals, fractions, geometry, etc.* Ability to disassemble and reassemble molds with minimal supervision* Demonstrated mechanical aptitude (i.e. to perform set-up of equipment, etc.) with ability to read and interpret blueprints/schematics.* Able to use various measuring tools (micrometers, calipers, dial indicators, etc.)* Good communication and interaction skills to interact with internal contacts with the ability to work without direct supervision.* Demonstrated problem solving skills with the ability to troubleshoot processes and equipment.* Basic knowledge of computers, equipment, tools, and paperwork associated with job including thorough understanding of standard work, in-process control sheets, and customer driven quality requirements.* Knowledge of plastic injection molds and components.* Ability to use manual machinery (mill, lathe, surface grinder, etc.)* Ability to operate the overhead crane.* Requires bending, heavy lifting, reaching, working in cramped and confined spaces.PHYSICAL REQUIREMENTS:* Must be able to lift up to 35 lbs. as needed.* Must be able to stand, walk, bend, and sit for extended periods of time.* Must maintain proper vision requirements* Must be able to maintain alertness to their surroundings.* Must have a current and valid Driver’s License.* Must have working knowledge of English## **Awareness, Unity, Empowerment:**At Magna, we believe that a diverse workforce is critical to our success. That’s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. ## **AI-Assisted Screening Disclosure**As part of our commitment to a fair, consistent, and efficient recruitment process, we may use artificial intelligence (AI) tools to assist in the initial screening of applications submitted through our Workday system. These tools help identify qualifications and experience that align with the role requirements. Please note that AI is used solely to support our recruiters. Final decisions are always made by the hiring manager and the hiring team. Importantly, no applicant data is shared externally through these AI tools. All information remains securely within our systems and is handled in accordance with our privacy and data protection policies. ## **Under conditions defined by applicable law, you may have the right to request an explanation of how AI is used to support decision-making.**If you have any questions or concerns about this process, feel free to contact our Talent Attraction team.## ## ****Worker Type:****Regular / Permanent**Group:**Magna Mechatronics, Mirrors & Lighting