Tooling Engineer

TriMas Corporation

California

On-site

USD 90,000 - 130,000

Full time

10 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Medical Insurance
Dental Insurance
Vision Insurance
Retirement Program
Paid Time Off

Job summary

Allfast Fastening Systems LLC in City of Industry, CA is seeking a Tooling Engineer to design, develop and improve tooling for aerospace fasteners, with emphasis on cold heading. The role collaborates with Production, Quality and Manufacturing Engineering to meet part specs, extend tool life and reduce downtime.

The successful candidate will have a mechanical engineering degree, 3+ years in tooling or manufacturing engineering, strong CAD skills (SolidWorks/AutoCAD) and experience with GD&T,

Qualifications

  • Bachelor's degree in mechanical/manufacturing engineering.
  • 3+ years tooling/manufacturing engineering experience.
  • Strong understanding of cold heading, forming processes and metallurgy.
  • Proficiency in CAD (SolidWorks or AutoCAD) with GD&T.
  • Experience selecting tool materials, heat treatments and coatings.
  • Hands-on root-cause analysis methods (8D, 5 Whys, fishbone).
  • Familiarity with tool management systems and ERP/MRP systems.
  • AS9100 knowledge; aerospace experience preferred.
  • Strong communication with operators, technicians and engineers.

Responsibilities

  • Design and detail heading tooling (dies, punches, cutoff tooling) using CAD with GD&T.
  • Develop tooling and forming progressions for new part numbers and changes.
  • Select tool materials, heat treatments and coatings.
  • Collaborate with toolrooms and external vendors to fabricate, inspect and qualify tooling.
  • Analyze tool wear and lead root-cause analysis to extend tool life and reduce scrap.
  • Run tool life studies and drive design changes to lower tooling cost.
  • Partner with Production to optimize machine setups and throughput.
  • Lead tool management system implementation and documentation.

Skills

Tooling engineering
CAD proficiency
Root-cause analysis
AS9100 knowledge
Communication skills

Education

Bachelor's degree in Mechanical/Manufacturing Engineering

Tools

SolidWorks
AutoCAD
ERP/MRP systems

Job description

Tooling Engineer

Company: Allfast Fastening Systems LLC

Primary Location: 15200 Don Julian Road, City of Industry, CA 91745 USA

Workplace Type: On-site

Employment Type: Salaried | Full-Time

Function: Engineering

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

Main Duties & Responsibilities
Summary

PennAero is hiring a Tooling Engineer at our Allfast Fastening Systems location in City of Industry, CA. Allfast Fastening Systems is a leading global manufacturer of solid and blind rivets, blind bolts, temporary fasteners, and installation tools for the aerospace industry. Our fasteners are crucial for the structural integrity of both commercial airliners and military jets. As a key supplier to major aerospace manufacturers, Allfast's products support the commercial, military, and general aviation platforms in production and in service.

About PennAero

PennAero is a leading manufacturer of highly engineered fasteners and specialized components for critical aerospace, defense, space, and advanced energy applications. We partner with customers to solve their most complex challenges, bringing technical depth and disciplined, agile execution when it matters most. Experience guides our growth-strengthening capabilities and expanding our global platform as markets evolve. To learn more about PennAero's capabilities and commitment to aerospace excellence, visit https://pennaero.com

Overview

The Tooling Engineer is responsible for the design, development and continuous improvement of tooling used in the manufacture of aerospace fasteners, with a focus on cold heading of pins and sleeves. Working closely with Production, Quality and Manufacturing Engineering, this role ensures tooling is designed to meet part specifications and tolerances, extends tool life, and reduces machine downtime and cost per part.

Key Responsibilities
Tool Design & Development
  • Design and detail heading tooling (dies, punches, cutoff tooling, transfer fingers and related components) using CAD software, producing drawings with full GD&T.
  • Develop tooling and forming progressions for new part numbers and engineering changes, supporting new product introduction from quote through first article inspection (FAI).
  • Select tool materials (e.g., carbide grades, tool steels), heat treatments and coatings based on part material, forming loads and wear requirements.
  • Work with internal toolrooms and outside tooling vendors to fabricate, inspect and qualify new and custom tooling to drawing.
Process Engineering & Continuous Improvement
  • Analyze tool wear, breakage and failure modes, then lead root-cause analysis and corrective action to extend tool life and reduce scrap.
  • Run tool life studies and trials, using data to drive design changes, standardize tooling, and lower tooling cost per part.
  • Partner with Production to optimize machine setups, reduce changeover times, and increase pin and sleeve heading throughput.
  • Support Lean, 5S and continuous improvement initiatives within the heading department.
Quality & Compliance
  • Work with Quality to make sure all manufactured and purchased tooling meets dimensional and tolerance requirements.
  • Support nonconformance investigations, MRB and corrective actions related to tooling.
  • Make sure tooling documentation and processes comply with AS9100 and customer requirements.
Tooling Systems & Documentation
  • Lead the implementation and use of a tool management system to track tool life, usage and inventory, integrated with ERP/MRP where applicable.
  • Maintain tooling drawings, revision control, tool lists and setup documentation for all heading part numbers.
  • Write standard operating procedures (SOPs) for tool setup, handling, inspection and maintenance.
  • Give technical direction and training to Tool Technicians and setup personnel.
Department Support
  • Help with tooling budgets, capital equipment recommendations and department goals.
  • Act as a technical point of contact for tooling between Production, Quality and Engineering.

This role is required to be onsite 5 days a week at our City of Industry, CA facility.

Qualifications
Qualifications & Skills
  • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering or a related field.
  • 3+ years of tooling or manufacturing engineering experience, preferably in cold heading, forging or fastener manufacturing.
  • Strong understanding of cold heading and forming processes, tool design, material flow, wear mechanisms and metallurgy, including titanium, aluminum, steel and nickel alloys.
  • Proficiency in CAD (e.g., SolidWorks or AutoCAD) and the ability to produce and interpret complex drawings using GD&T.
  • Experience selecting tool materials, heat treatments and coatings.
  • Hands-on experience with root-cause analysis methods (e.g., 8D, 5 Whys, fishbone).
  • Familiarity with tool management systems and ERP/MRP systems.
  • Working knowledge of AS9100 quality requirements; aerospace experience strongly preferred.
  • Strong communication skills and the ability to work effectively with machine operators, technicians, inspectors and engineers.

Compensation

In compliance with all states and cities requiring transparency of pay, the expected pay range for this position is $90,000 - $130,000.

Compensation can vary depending on several factors, including a candidate's qualifications, skills, experience, competencies, and geographic location. Some roles may qualify for extra incentives like equity, commissions, or other variable performance-related bonuses. Further details will be provided by our recruiting team during the interview process.

Benefits

  • Medical Insurance and Prescription Drugs
  • Dental Insurance
  • Vision Insurance
  • Flexible Spending Accounts
  • Life Insurance
  • Short-Term Disability
  • Long-Term Disability Insurance (for eligible employees)
  • Employee Assistance Plan (EAP)
  • Paid Time Off (may include vacation and sick time)
  • Retirement Program
  • Other Voluntary Benefits
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Tooling Engineer
Tooling Engineer

Allfast Fastening Systems • California

On-site
USD 90,000 - 130,000
Medical Insurance
Dental Insurance
Vision Insurance
+4
Tooling Supervisor
Tooling Supervisor

TriMas Corporation • California

On-site
USD 110,000 - 135,000
Medical Insurance
Prescription Drugs
Dental Insurance
+8
Tooling Supervisor
Tooling Supervisor

TriMas Corporation • California

On-site
USD 110,000 - 135,000
Medical Insurance
Prescription Drugs
Dental Insurance
+9
Director of Engineering
Director of Engineering

Allfast Fastening Systems, Inc. • California

On-site
USD 175,000 - 225,000
Medical Insurance
Dental Insurance
Vision Insurance
+3
Director of Engineering
Director of Engineering

TriMas Corporation • California

On-site
USD 175,000 - 225,000
Medical Insurance
Prescription Drugs
Dental Insurance
+5
Manufacturing Engineer
Manufacturing Engineer

TriMas Corporation • California

On-site
USD 72,000 - 120,000
Medical Insurance
Dental Insurance
Vision Insurance
+3
Director of Engineering – On‑Site Aerospace Manufacturing Leader
Director of Engineering – On‑Site Aerospace Manufacturing Leader

TriMas Corporation • California

On-site
USD 175,000 - 225,000
Medical Insurance
Prescription Drugs
Dental Insurance
+5
Director of Engineering — Aerospace Manufacturing Leader
Director of Engineering — Aerospace Manufacturing Leader

Allfast Fastening Systems, Inc. • California

On-site
USD 175,000 - 225,000
Medical Insurance
Dental Insurance
Vision Insurance
+3
Tooling Engineer - Aerospace Fasteners
Tooling Engineer - Aerospace Fasteners

PTS Advance • California

On-site
USD 90,000 - 130,000
Continuous Improvement Engineer
Continuous Improvement Engineer

TriMas Corporation • California

On-site
USD 90,000 - 120,000
Medical Insurance
Dental Insurance
Vision Insurance
+2