Tool & Fixture Machinist

Amentum

Wisconsin

On-site

USD 30,000 - 41,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Amentum seeks a 1st shift Tool & Fixture Machinist to support our electrical apparatus manufacturing in Waukesha, WI. You will machine and maintain tooling and die fixtures and assist technicians with tooling across lines, contributing to preventive maintenance and uptime.

Responsibilities include setup and installation of die fixtures, diagnosing malfunctions, and performing PMs on equipment such as CNC tools, pumps, and conveyors, while adhering to safety protocols and CMMS procedures.

Qualifications

  • High School diploma or equivalent.
  • Five years of experience as a tool and fixture maker or machinist in an industrial environment or demonstrated equivalent combination of education and experience.
  • Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher.

Responsibilities

  • Assist with set up, maintenance and installation of die fixtures for the automated track shoe shear line.
  • Diagnose malfunctions in machinery and equipment with team.
  • Maintain, operate and troubleshoot mechanical systems and equipment such as pumps, bearings, blowers, fans, gearboxes, conveyors and other equipment as required.
  • Perform preventive maintenance inspections and actions (lubrication, cleaning, filter changes).
  • Assist in troubleshooting and making basic electrical/mechanical repairs to the machinery in the repair cell.
  • Perform preventive maintenance on mechanical systems control and operating systems as scheduled in the CMMS.
  • Follow safety guidelines including job hazard analysis and lockout/tagout procedures and PPE.

Skills

Machinist experience
Tooling & fixtures

Education

High School diploma

Job description

Amentum is seeking a 1st shift Tool & Fixture Machinist to join our team of multi-skilled maintenance technicians in an Electrical Apparatus manufacturing facility in Waukesha, WI. Typical work schedule is 1st shift; hours may vary based on critical business demands and may include Saturday hours as needed to support production.

The Tool & Fixture Machinist is responsible for machining / maintaining tooling and die fixtures for various lines as well as assisting Mechanical and Electrical technicians with tooling of multiple equipment lines and performing preventive maintenance on the tooling, dies and fixtures for the line in an industrial manufacturing environment.

This position primarily performs machining of the tooling, assisting in die set up and changes, and performing routine PMs, as well as some troubleshooting and repair of shear fixtures and equipment. This equipment includes, but is not limited to, automated shear line, die fixtures, heat treat equipment, CNC machine tools, quenching equipment, pumps, bearings, blowers, fans, gearboxes, winders and air handlers and other equipment as required, as well as HVAC, pneumatic, hydraulic, conveyor and/or R.O. systems and overhead cranes.

Provides intermediate level of expertise. Effectively communicates with the site management, team and the customer to understand requirements, solve electrical problems, and provide solutions to manufacturing problems. Identifies and corrects any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required.

Responsibilities
  • Assists with set up, maintenance and installation of die fixtures for the automated track shoe shear line.
  • Assists co-workers in diagnosing malfunctions in machinery and equipment.
  • Assists the team with maintaining, operating and troubleshooting mechanical systems and equipment such as pumps, bearings, blowers, fans, gearboxes, conveyors and other equipment as required.
  • Conducts preventive maintenance inspections and performs required preventative maintenance actions such as lubrication, cleaning, filter changes, etc.
  • Assists in troubleshooting and making basic electrical/mechanical repairs to the machinery in the repair cell.
  • Performs preventive maintenance on mechanical systems control and operating systems as scheduled in the Computerized Maintenance Management System (CMMS).
  • Recommends activities to improve maintenance methods and equipment performance.
  • Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required.
  • Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.
  • Demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer.
  • Other duties as assigned by Manager or Supervisor.
Minimum Requirements
  • High School diploma or demonstrated equivalent.
  • Five years of experience as a tool and fixture maker or machinist in an industrial environment or demonstrated equivalent combination of education and experience.
  • Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher.
Additional Information

Qualified applicants who are offered a position must pass a pre-employment substance abuse test.

This position may require a valid Driver's License.

This position does not include sponsorship for United States work authorization.

This position will require the ability to obtain a security access badge at our client's location.

This position may require various shifts, weekends, and alternative work schedules.

Must be willing to work overtime when required. May be required to work holidays and weekends.

Physical Requirements
  • Requires the ability to regularly lift to 50 lbs.
  • Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.
  • Requires the flexibility to bend/stoop, squat repetitive during shift.
  • Requires the ability to regularly kneel repetitive for shift.
  • Requires the ability to regularly move in a 90-degree fashion on a repetitive basis for shift.
  • Requires the ability to stretch/reach on a repetitive basis for shift.
  • Requires the ability to walk extensively throughout the plant during shift.
  • Requires the ability to safely operate an Ariel Lift.
  • Requires the use of a Company/Client approved utility knife.
  • Requires the ability to differentiate colors pertaining to wire color-coding.
  • Some tasks will require repetitive wrist movement.
  • Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen.
  • Requires ability to use a variety of office equipment and to operate a computer keyboard to access data bases, to send/receive messages and to prepare documents.
  • Demonstrated fluency in computer use including the full Microsoft product line.
  • Requires the abili
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Tool & Fixture Machinist
Tool & Fixture Machinist

Amentum • Waukesha (WI)

On-site
USD 34,000 - 45,000
Health insurance
Paid time off
401(k) matching
+3
Tool & Fixture Machinist — 1st Shift Maintenance Pro
Tool & Fixture Machinist — 1st Shift Maintenance Pro

Amentum • Wisconsin

On-site
USD 30,000 - 41,000
Maintenance Technician - 1st shift (West Bend)
Maintenance Technician - 1st shift (West Bend)

Metalcraft of Mayville, Inc. • West Bend (WI)

On-site
USD 65,000 - 85,000
Tool & Die Machinist: Precision Fixture & Tooling Pro
Tool & Die Machinist: Precision Fixture & Tooling Pro

Amentum • Waukesha (WI)

On-site
USD 34,000 - 45,000
Health insurance
Paid time off
401(k) matching
+3
Maintenance Technician - 1st Shift
Maintenance Technician - 1st Shift

ADP, Inc. • Rockford (IL)

On-site
USD 34,000 - 47,000
Industrial Electro Mechanic
Industrial Electro Mechanic

Ecore International • York

On-site
USD 51,000 - 62,000
Maintenance Technician
Maintenance Technician

Greenville Tool and Die Co. • Greenville (MI)

On-site
USD 55,000 - 75,000
Industrial Master Electrician — 480V Systems & Overtime
Industrial Master Electrician — 480V Systems & Overtime

Key Technical Solutions, Inc • New Berlin (WI)

On-site
USD 51,000 - 59,000
Industrial Maintenance Mechanic- 2nd Shift
Industrial Maintenance Mechanic- 2nd Shift

MICA Steelworks • Euless (TX)

On-site
USD 52,000 - 76,000
Industrial Maintenance Technician: Mechanical & Electrical
Industrial Maintenance Technician: Mechanical & Electrical

Automatic Data Processing, Inc. • Town of Lancaster (NY)

On-site
USD 65,000 - 80,000