Thermal Development Technician (Starship) - Temporary

SPACE EXPLORATION TECHNOLOGIES CORP

Town of Texas, Northern (WI, KY)

Hybrid

USD 42,000 - 66,000

Full time

14 days+
Application generator

An application made for this job — a tailored resume and cover letter that speak straight to the posting.

Get past ATS filters

Job summary

SpaceX is seeking a Thermal Development Technician (Starship) for a temporary assignment in the U.S. The role focuses on manufacturing and assembling TPS components, including ceramic fibers, tiles and coatings, with hands-on work on the factory floor, lab, and in production areas.

The candidate will follow procedures, interpret drawings, document processes, and operate fabrication equipment, all while supporting the TPS team’s objective of enabling astronauts to fly safely back to space.

Qualifications

  • High school diploma or equivalency required.
  • Experience with hand tools and hand-held power tools.

Responsibilities

  • Preprocess and fabricate ceramic fibers, filaments, and powders for thermal protection system components.
  • Fabricate ceramic billets, tiles, coatings, and gap fillers as part of TPS hardware.
  • Perform basic fabrication, surface preparation, bonding and oven curing.
  • Document processes precisely to enable repeatable results.
  • Read and interpret engineering drawings and symbols.

Job description

Thermal Development Technician (Starship) - Temporary

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal ofenabling human life on Mars.

THERMAL DEVELOPMENT TECHNICIAN (STARSHIP) - TEMPORARY

The Thermal Protection Systems (TPS) team tackles space exploration’s toughest problems by developing the heat shields for our next-generation rockets and spacecraft. This hardware must survive the most extreme environments known to mankind and protect our vehicle through atmospheric entry. As a technician on the TPS team, you will thrive in a hands-on environment. You will spend time in the office, on the factory floor, and in the lab to execute on the mission to bring the capability of flying astronauts back to the United States.

RESPONSIBILITIES:

  • Preprocess and manufacture ceramic fibers, filaments, and powders required for the fabrication of next-tier products (candidate must be comfortable working with these types of ceramic materials)
  • Fabricate ceramic refractory billets, ceramic tiles, thermal gap fillers, coatings, and other components required for a robust thermal protection system
  • Basic fabrication, surface preparation for processing, bonding, and oven curing
  • Document processes precisely to be able to replicate each step taken in the material processing
  • Perform product inspection and rework as required Read and interpret engineering drawings with an understanding for drawing symbols, flag notes, and general notes
  • Assist in the maintenance and repair of production machinery

POSITION DETAILS:

This is a TEMPORARY position with SpaceX, for the length of time as stated, and is subject to change with minimal notice as business needs dictate.

  • LENGTH OF POSITION: 3 months (permanent hire conversion based on performance and business need)

BASIC QUALIFICATIONS:

  • High school diploma or equivalency certificate
  • Experience with various types of hand tools or hand-held power tools

PREFERRED SKILLS AND EXPERIENCE:

  • Ability to use precision measuring instruments (calipers, height gauge, depth mic) Ability to operate personnel platforms (boom lifts, scissor lifts, etc.)
  • Ability to perform work according to procedures and specifications
  • Experience setting up assemblies and parts in various types of processing and curing equipment such as an ovens and high temperature kilns to obtain desired set and cure
  • Proficient/experienced to accurately measure and mix using scales for the process of tile coatings, sealants and RTV applications
  • Comfortable working with solvents, ceramic precursors, inorganic acids and bases
  • Experience with thermal protection system (TPS) or phenolic impregnated carbon ablator (PICA)
  • Experience applying sealants, alodine, primer, adhesives, and special finishes Good understanding of basic mathematical concepts
  • Fluent in the Office platform (Microsoft Word, and Excel)
  • Experience operating and maintaining Kuka or other 6 –axis robots
  • Experience in using Simantic or other HMIs
  • Basic understanding of stud arc welding
  • Basic understanding of robotic automation
  • Experience working with Programmable Logic Control (PLC) in an automation setting

ADDITIONAL REQUIREMENTS:

  • Ability to work one of the following shifts:
  • Monday- Friday (6:00 a.m. – 6:30 p.m.)
  • Monday -Friday (6:00 p.m. – 6:30 a.m.)
  • Possess a valid Drivers License
  • Sit: Up to 1 hour per day
  • Push/Pull: Up to 50lbs. (unassisted) 30 minutes to 1 hour per day
  • Overhead reach: Up to 6 hours per day
  • Walk: Up to 6 hours per day
  • Lift/Carry: Up to 25lbs. (unassisted) 30 minutes to 1 hour per day
  • Climb (ladder/stairs): Up to 6 hours per day
  • Kneel/Crouch: Up to 6 hours per day
  • Upper body twist: Up to 6 hours per day
  • Ability to work in temperatures over 80 degrees Up to 1 hour per day
  • Candidate must be capable of safely working at heights (up to 500ft), using an air purifying respirator, and performing the physical requirements of the job listed in the job description
  • Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review
  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s ... or applicants requiring reasonable accommodation to the application/interview process should reach out toEEOCompliance@spacex.com .

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Thermal Development Technician (Starship) - Temporary
Thermal Development Technician (Starship) - Temporary

SpaceX • Town of Texas (WI)

On-site
USD 30,000 - 47,000
Thermal Development Technician (Starship) - Temporary
Thermal Development Technician (Starship) - Temporary

InvestedintheMission • Town of Texas (WI)

On-site
USD 42,000 - 65,000
Thermal Development Technician (Starship) - Temporary Hardware
Thermal Development Technician (Starship) - Temporary Hardware

Front Door Defense • Town of Texas (WI), Northern (KY)

On-site
USD 60,000 - 90,000
Thermal Development Technician (Starship)
Thermal Development Technician (Starship)

SPACE EXPLORATION TECHNOLOGIES CORP • Northern (KY)

On-site
USD 60,000 - 85,000
Thermal Development Technician (Starship)
Thermal Development Technician (Starship)

InvestedintheMission • Town of Texas (WI)

On-site
USD 52,000 - 78,000
Thermal Development Technician (Starship)
Thermal Development Technician (Starship)

SPACE EXPLORATION TECHNOLOGIES CORP • Town of Florida (NY)

On-site
USD 40,000 - 60,000
Thermal Development Technician (Starship)
Thermal Development Technician (Starship)

InvestedintheMission • Town of Florida (NY)

On-site
USD 65,000 - 110,000
Thermal Development Technician, Robotic Welding (Starship)
Thermal Development Technician, Robotic Welding (Starship)

SpaceX • Brownsville (TX)

On-site
USD 60,000 - 85,000
Thermal Development Technician (Starship)
Thermal Development Technician (Starship)

Latent AI • Town of Texas (WI)

On-site
USD 50,000 - 70,000
Thermal Development Technician, Robotic Welding (Starship)
Thermal Development Technician, Robotic Welding (Starship)

InvestedintheMission • Town of Texas (WI)

On-site
USD 60,000 - 90,000