Test Technician

Velo3D, Inc.; Fremont (CA); Vor Ort; USD 41.000 - 55.000; Vollzeit

Benefits dieser Stelle

Healthcare coverage

401(k) employer contributions

Monthly all-hands meetings and team *?

Zusammenfassung

Velo3D, Inc. in Fremont, CA is seeking a Test Technician to bring our metal additive production printers to life. Working from written procedures, you will perform three levels of test from subsystem bring-up to final qualification and sign-off.

You will follow safety rules, document measurements, and escalate issues with clear details. Training is provided; you don’t need prior procedure knowledge to start, and you’ll learn the VELO3D process and equipment on the job.

Qualifikationen

• High school diploma or GED required; associate’s or bachelor’s in a technical field preferred.
• 1–3 years hands-on testing, installing or servicing complex equipment across industries.
• Experience working to formal, revision-controlled procedures.
• Comfortable with multimeters and basic test instruments; read wiring diagrams and work around high voltage.

Aufgaben

• Pre-power checks: verify wiring continuity, insulation, polarity, grounding; confirm correct configuration.
• Bring-up (Level 600): power up, verify subsystems, perform gas, vacuum and coolant leak checks.
• Calibration and software: calibrate sensors, load firmware/software, set printer configurations.
• Validation (Level 700): run full system test to meet acceptance criteria.
• Final qualification (Level 800): support final checks and hand off printer with open items documented.
• Troubleshooting: diagnose using diagrams; escalate beyond procedure with detailed symptoms and steps.
• Records: log measurements accurately; report defects and suggest corrections for unclear procedures.
• Safety: enforce lockout/tagout, laser safety, gas safety, and PPE standards; keep area audit-ready.

Kenntnisse

Reading wiring diagrams

Detail-oriented

Procedure compliance

Team collaboration

Ausbildung

High school diploma or GED

Associate or bachelor in technical field (preferred)

Tools

Multimeters

Test instruments

Jobbeschreibung

Position Summary

As a Test Technician, you bring Velo3D’s metal additive manufacturing printers to life. Working from written, step-by-step procedures, you take newly assembled printers through three stages of test:

Subsystem bring-up (Level 600) — power up and verify each subsystem in turn: electrical and safety interlocks, gas and compressed air, cooling, motion, powder handling, laser optics, controls and software.

System validation (Level 700) — confirm the subsystems work together and the printer meets its acceptance criteria.

Final qualification (Level 800) — support the last qualification checks and sign-off before a printer is released.

Once trained, you run these steps on your own and know when to stop and ask for help. Full training is provided — you don’t need to know our procedures coming in. Success looks like procedures followed exactly, problems flagged early with clear detail, and test records complete enough to reconstruct any build months later.

Essential Functions

• Pre-power checks — Before anything is switched on, check wiring continuity, insulation, polarity and grounding, and confirm the printer is built to the correct configuration.
• Bring-up (Level 600) — Power up and verify each subsystem in sequence; perform pressure and leak checks on the gas, vacuum and coolant lines.
• Calibration and software — Calibrate sensors, gauges, temperature controls and motion systems; load firmware and software and apply the settings for each printer.
• Validation (Level 700) — Run the full system test sequence to confirm the printer meets its acceptance criteria.
• Final qualification (Level 800) — Support Test Engineering during final qualification and hand off each printer with all open items clearly documented.
• Troubleshooting — Diagnose routine problems using wiring diagrams, piping diagrams and controller screens. Escalate anything outside the procedure to the lead technician or a Test Engineer, with symptoms, readings and steps already taken.
• Records — Fill in test records accurately as you go, logging actual measurements, not just pass/fail. Report defects and suggest corrections where a procedure is unclear.
• Safety — Follow lockout/tagout (isolating power before work), laser, compressed gas, high-voltage and metal powder safety rules without exception; keep the work area clean and audit-ready.

Qualifications

Required:

• High school diploma or GED required; associate’s or bachelor’s degree in a technical field preferred.
• 1–3 years hands-on testing, installing or servicing complex equipment — semiconductor, medical device, aerospace, industrial automation or military maintenance backgrounds all translate well.
• Experience working to formal, revision-controlled procedures.
• Comfortable with multimeters and basic test instruments; able to read wiring diagrams and work safely around high voltage.
• Able to read piping diagrams; familiar with leak testing, precision assembly, torque specifications and alignment.
• Comfortable with Windows and installing software; willing to learn firmware loading, controller interfaces and basic network troubleshooting.
• Detail-oriented and disciplined — follows the procedure exactly and stops to ask rather than improvise.

Preferred:

• Experience with compressed gas systems, closed-loop liquid cooling, high-voltage electrical, or laser systems (we will train).
• Certifications, Working Conditions
• Export control: must be ITAR-compliant (U.S. citizen or lawful permanent resident).
• Laser safety, lockout/tagout, compressed gas, metal powder and forklift training provided and must be maintained.
• Onsite at Fremont and Livermore. Day shift, with swing shift work as needed; a shift differential will be paid for swing shift hours. Occasional weekend work.
• Exposure to high voltage, high-power lasers, inert gases, metal powders and noise; safety glasses, laser eyewear, steel-toed shoes and other PPE as posted.
• Standing and walking for long periods, ladders and occasional confined spaces; lift up to 50 lbs; color vision and fine motor control required.

About the Company:

Velo, Velo3D, Sapphire and Intelligent Fusion are registered trademarks of Velo3D, Inc. Without Compromise, Flow, Flow Developer, and Assure are trademarks of Velo3D, Inc.

With the only SupportFree laser powder bed fusion capability, we enable on-demand manufacturing of production quality Titanium, Inconel, and Aluminum parts with an unprecedented degree of design freedom and quality control. The VELO3Daward-winning solution includes an integrated offering of hardware and software: Sapphire® metal AM production printer, Flow™ print preparation software, Assure™ quality assurance and control system, and an integrated manufacturing process that runs throughout the printing operation.

Our team enjoys excellent benefits including healthcare coverage and 401(K) employer contributions. We believe in transparency and recognizing exceptional efforts through our monthly all-hands meetings and team member appreciation awards.

Our job titles may span more than one career level. The starting base hourly rate for this full-time position is between $30.00 and $40.00 per hour. This hourly rate range reflects the minimum and maximum target for this position in the U.S. The actual base pay is dependent upon many factors, such as work experience, job-related skills, related education, work location, and market demands. The base pay range is subject to change and may be modified in the future. In addition to a competitive base salary and a comprehensive benefits package, this position may be eligible for other forms of compensation such as participation in a bonus and equity program, as applicable.

Velo3D provides equal employment opportunities to all employees and applicants for employment without regard to, and prohibits discrimination and harassment based on, race, color, religion, age, sex, national origin, disability, medical condition, genetic information, military or veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.