Telemetry and Flight Terminations Engineer II

RTX; San Diego (CA); On-site; USD 69,000 - 131,000; Full time

Benefits offered by this job

Relocation eligibility

Onsite role

Job summary

RTX is seeking junior engineers to join the Effector Analog & Power (EAP) Team in Tucson, AZ, focusing on Telemetry and Flight Termination Systems. The role involves designing and testing analog/mixed-signal electronics, power regulation, and related subsystems for flight tests.

Candidates should have STEM degrees and relevant electronics experience. The team emphasizes rigorous standards and collaboration with external suppliers; relocation is eligible, and onsite work is required in the

Qualifications

• Requires a bachelor’s degree in science, technology, engineering, or mathematics (STEM) and a minimum of 2 years of prior relevant experience OR an advanced STEM degree.
• Experience with electronics design with emphasis on systems and/or subsystems.
• Experience utilizing and/or creating electrical design specifications.
• Experience with analog electronics design, including one or more of the following: FETs/BJTs, op-amp, filters, termination, A/D converters, level shifters.
• Experience using tools such as MATLAB, MathCAD, Mathematica, or other similar tools.

Responsibilities

• Design, analyze, simulate, test, and document analog and mixed signal electronics circuitry.
• Assist in designing electronics at the subsystem or PCB level.
• Help to see PCB development through its design phases, from requirements definition through initial integration testing.
• Be the “Responsible Engineering Authority” (REA) for FTS and/or TM designs.
• Generate and/or compile all required analysis and documentation verifying compliance with program and performance requirements.

Skills

Electronics design experience

Analog electronics

System/subsystem design

PCB/ECAD

Circuit analysis

Education

Bachelor’s degree in STEM

Advanced STEM degree

Tools

MATLAB

MathCAD

Mathematica

Job description

Date Posted: 2026-10-13

Country: United States of America

Location: US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02

Position Role Type: Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type: DoD Clearance: Secret

Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon's Hardware Electrical Engineering Team is looking forexperienced engineers who have electronics knowledge to supportthe design and test of electronicproducts and systems.Our bread and butterareall things“circuit cards”,and we wantyou to help us blaze the path!

We'regrowing fast and we want you to grow with us!We'reexpanding our engineering organization dramatically to meet exciting customer demand, andwe'reactively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Industry experience in defense? Not required —we'llinvest in you. If you meet the minimum qualifications, we want to talk. Apply today and take the next step in your engineering career.

What You Will Do

Raytheon's Effector Analog & Power (EAP) Team is looking for junior engineers to help design Telemetry and Flight Termination Systems.

The EAP Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operate in lower power and voltage ranges less than 10kW and 1000V.

The Telemetry and Flight Termination Systems team develops system designs focused on supporting effector flight tests. We adhere to rigorous standards from the Range Commanders Council, Federal Communications Commission, and the National Security Agency in the design and utilization of our products. We perform make/buy trade studies, design application specific Printed Circuit Board Assemblies, and work with leading industry suppliers of antennas, transmitters, encoders, and flight termination components.

• Design, analyze, simulate, test, and document analog and mixed signal electronics circuitry.
• Assist in designing electronics at the subsystem or PCB level.
• Help to see PCB development through its design phases, from requirements definition through initial integration testing.
• Be the “Responsible Engineering Authority” (REA) for FTS and/or TM designs.
• Generate and/or compile all required analysis and documentation verifying compliance with program and performance requirements.

Qualifications You Must Have

• Requires a bachelor’s degree in science, Technology, Engineering, or Mathematics (STEM) and a minimum of 2 years of prior relevant experience OR an advanced STEM degree.
• Experience with Electronics design with emphasis on systems and/or subsystems.
• Experience utilizing and/or creating electrical design specifications.
• Experience with analog electronics design, including one or more of the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, comparator circuits, A/D converters, level shifters, and load switches.
• Experience using tools such as MATLAB, MathCAD, Mathematica, or other similar tools.

Qualifications We Prefer

• An advanced degree in Electrical Engineering
• A self-starter, a quick learner, be able to function in a dynamic environment, and have good time management skills.
• Experience communicating and documenting technical topics at the small team level.
• Experience with Flight Termination and/or Telemetry systems design.
• Experience with electronics laboratory testing and troubleshooting.
• Professional experience with the ECAD process and have a conceptual understanding of the layout and routing concerns specific to RF circuit cards.
• Experience in any one of the following:
  • Designing using microcontrollers, FPGA’s, and digital interfaces
  • System grounding schemes and resolving ground reference issues
  • Developing requirements and test plans
  • Electrical interface control documents
  • Power supply design
  • Detailed printed circuit board layout

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• Work Schedule:9/80 schedule (every other Friday off)
• Relocation Eligibility:This position is eligible for relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Tucson, AZ: https://careers.rtx.com/global/en/raytheon-tucson,-az-location

#LI-SP1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attendselect steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms