Technician, Mechanical (Opal, WY)

Enterprise Products; Opal (WY); On-site; USD 55,000 - 75,000; Full time

Job summary

Enterprise Products Partners L.P. is seeking a Mechanical Technician in Opal, WY to inspect, troubleshoot and repair mechanical equipment, including reciprocating engines, pumps and compressors, to maintain safe and productive operations.

You will follow procedures, participate in safety programs, work in both indoor and outdoor industrial environments, and coordinate with the Area Supervisor to minimize downtime. The role requires 3+ years mechanical experience and a high school diploma.

Qualifications

• High school diploma or GED required.
• Technical certification or equivalent in mechanical/energy field preferred.
• 3+ years mechanical experience required.
• 3-5 years gas-fired, engine-driven compressor experience desired.
• Strong mechanical aptitude and troubleshooting skills required.
• Self-motivated, able to work alone or in a team.
• Experience with reciprocating engines and components required.
• Valid driver's license with good driving record.

Responsibilities

• Perform mechanical inspection, troubleshooting and repair to maintain equipment performance.
• Maintain centrifugal pumps, electric motors and related components.
• Repair of reciprocating engines and associated components.
• Assist with replacement of pumps, motors, valves and other equipment.
• Work in process plants or remote field units and comply with safety requirements.
• Participate in training, process safety reviews and safety meetings as required.
• Complete regulatory records and reports, and coordinate with supervision to minimize downtime.
• Respond to emergencies as part of the area emergency response team.

Skills

Mechanical aptitude

Troubleshooting

Safety-consciousness

Communication skills

Teamwork

Education

High school diploma or GED

Tools

MS Word

Excel

Job description

The Successful Candidate Will Meet The Following Qualifications

• A minimum of a high school diploma or G.E.D. equivalent is required.
• Technical certification or equivalent training in a mechanical environment or energy related field is preferred.
• A minimum of 3+ years mechanical experience is required.
• A minimum of 3-5 years gas-fired, engine-driven compressor experience is desired.
• Strong mechanical aptitude with basic troubleshooting and maintenance skills is required.
• Self-motivated with ability to work alone or be a contributing team member.
• Experience in maintenance and repair of reciprocating engines and associated components is required.
• Must have a current driver's license and good driving record.
• Ability to read and understand, analyze and interpret documents, equipment repair manuals, reports and federal, state and local codes and regulations.
• The ability to perform basic mathematical calculations, such as, percentages, ratios and proportions to practical solutions is required.
• Basic computer skills such as opening, creating and updating content in MS Word documents and Excel spreadsheets is required.
• The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required.
• The ability to modify communication style in order to influence, persuade, negotiate, and engage all parties according to the audience and circumstance is required.
• Takes initiative and is proactive in addressing issues. Quickly and efficiently completes tasks.
• The ability to demonstrate conscientiousness, dependability and commitment to the role, team and company.
• The ability to work in a fast paced environment with less definition, policy, and bureaucracy.
• Works indoors and outdoors in and around industrial and electrical equipment.
• Works in temperature extremes due to weather conditions and operating equipment.
• Uses physical force to lift, push, pull and hold equipment and tools.
• Climbs and works at various heights and may work in a standing, sitting, lying down, crouched or kneeling position.
• Routinely reacts to visual, aural and other signals, including alarms and instructions, and is required to visually inspect work.
• May work in confined spaces (i.e. tanks, between compressors, vessels).
• Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., manually transport a load up to 75 lbs., apply up to 100 foot pounds of torque.
• Must have ability to get in and out of vehicles regularly and ride over rough roads.
• Must wear special safety equipment while working and must be able to lift and put on emergency breathing apparatus and/or protective equipment.
• The ability to take call-outs and work overtime is required.
• Must live or relocate to within 1 hour of reporting location.

What you will be doing

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership’s assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity.

The Mechanical Technician will perform mechanical functions and duties of inspecting, checking, troubleshooting, repairing, and replacing all mechanical equipment in order to maintain high levels of safe and productive equipment performance. Responsibilities include, but are not limited to

• Routine maintenance of centrifugal pumps and electric motors such as bearing and seal replacements, alignments, couplings, sumps, fans, drain piping modifications, etc.
• Maintenance on other mechanical equipment such as block valves, control valves, air compressors, valve actuators, etc.
• Maintenance and repair of reciprocating engines and associated components.
• Maintenance Ariel Compressors and Caterpillar 3600 series.
• Assist with replacement of pumps, motors, valves, and other equipment as needed, including foundation work, initial alignment, testing, and startup.
• Must be able to work in process plants or out on remote field units and associated components
• Participate and successfully complete training programs, process safety management reviews, and safety meetings required to comply with state and federal regulations.
• Must meet the requirements of the Company's Operator Qualification program to perform identified covered tasks and remain compliant or work under the direct supervision and observation of an individual who has previously been qualified with the Company's and Code of Federal Regulation requirements.
• Reviews procedures as necessary to ensure compliance of all company and industry standards to meet all regulatory agency requirements.
• Properly completes records of time and required regulatory reports.
• Maintains close contact with the Area Supervisor regarding maintenance trouble reports and scheduled equipment maintenance to effect a minimum interruption of product throughput.
• Ability to optimize work to effect a minimal amount of overtime.
• Performs remedial and preventative maintenance and maintains facility appearance and safety through good housekeeping practices inside and outside of the facilities.
• Participates in available cross training to effectively develop skills in areas specific to other technicians.
• Utilizes precision tools and test equipment as needed.
• Responds to operational emergencies as a member of an area emergency response team.
• Performs regulatory required inspections.
• Obtains services from contractors to perform specialty services and supervises their work.
• Trains and guides others to learn duties of Mechanical Technician.

What Your Background Should Look Like (minimum Qualifications)

• A minimum of a high school diploma or G.E.D. equivalent is required.
• Technical certification or equivalent training in a mechanical environment or energy related field is preferred.
• A minimum of 3+ years mechanical experience is required.
• A minimum of 3-5 years gas-fired, engine-driven compressor experience is desired.
• Strong mechanical aptitude with basic troubleshooting and maintenance skills is required.
• Self-motivated with ability to work alone or be a contributing team member.
• Experience in maintenance and repair of reciprocating engines and associated components is required.
• Must have a current driver's license and good driving record.
• Ability to read and understand, analyze and interpret documents, equipment repair manuals, reports and federal, state and local codes and regulations.
• The ability to perform basic mathematical calculations, such as, percentages, ratios and proportions to practical solutions is required.
• Basic computer skills such as opening, creating and updating content in MS Word documents and Excel spreadsheets is required.
• The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required.
• The ability to modify communication style in order to influence, persuade, negotiate, and engage all parties according to the audience and circumstance is required.
• Takes initiative and is proactive in addressing issues. Quickly and efficiently completes tasks.
• The ability to demonstrate conscientiousness, dependability and commitment to the role, team and company.
• The ability to work in a fast paced environment with less definition, policy, and bureaucracy.
• Works indoors and outdoors in and around industrial and electrical equipment.
• Works in temperature extremes due to weather conditions and operating equipment.
• Uses physical force to lift, push, pull and hold equipment and tools.
• Climbs and works at various heights and may work in a standing, sitting, lying down, crouched or kneeling position.
• Routinely reacts to visual, aural and other signals, including alarms and instructions, and is required to visually inspect work.
• May work in confined spaces (i.e. tanks, between compressors, vessels).
• Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., manually transport a load up to 75 lbs., apply up to 100 foot pounds of torque.
• Must have ability to get in and out of vehicles regularly and ride over rough roads.
• Must wear special safety equipment while working and must be able to lift and put on emergency breathing apparatus and/or protective equipment.
• The ability to take call-outs and work overtime is required.
• Must live or relocate to within 1 hour of reporting location.

Primary Location

USA-Wyoming-Opal

Shift

Day Job

Travel

Yes, 10 % of the Time

Unposting Date

Ongoing

Organization

Operations

Job Level

Individual Contributor