Technician C - FT-1020

FullSpeed Automotive

Marietta (GA)

On-site

USD 28,000 - 41,000

Full time

2 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

FullSpeed Automotive is seeking a Technician C to perform a variety of mechanical services, including brakes, rotors, fluid exchanges, oil changes, and powertrain maintenance. The role involves explaining maintenance needs to customers and ensuring high-quality workmanship.

The technician will diagnose issues from customer concerns, document findings, and road test when necessary. A valid driver's license and state certifications where applicable are required, with on-site tools and a

Qualifications

  • Minimum of two years related experience and/or training in automotive repair.
  • Ability to read and interpret safety rules, operating and maintenance instructions.
  • Ability to write routine tickets, notes and other correspondence.
  • Valid Driver's License; State Emission Certification if applicable; State Vehicle Inspector Certification if applicable.

Responsibilities

  • Perform mechanical tasks such as brakes, rotors, fluid exchanges, oil changes, transmission and cooling system maintenance.
  • Diagnose vehicle problems based on customer complaints and inspections.
  • Document all work performed and recommended; road test vehicles as needed.
  • Ensure shop areas are clean and organized; follow safety regulations.

Skills

Customer communication
Diagnostics basics
Tool use
Safety compliance

Job description

Summary/objective

Technician C requires average mechanical knowledge and performs most mechanical tasks assigned to them, including the following jobs or services: brakes, rotors, fluid exchanges, oil change, transmission, differential, cooling system maintenance, repairing and replacing tires and additional services (e.g. wiper blades, air filters, etc.). Technician C communicates with customers, educating them on necessary preventive vehicle maintenance. Additional duties may include some courtesy services, tire repair and replacement services.

  • You are paid an hourly rate and a commission percentage that is standard across the company.
  • Performs work as outlined on repair order with efficiency and accuracy, in accordance with supervisory direction and factory standards.
  • Diagnoses vehicle problems based on customer complaints and inspection.
  • Examines assigned vehicles to determine if further safety or service work is required or recommended.
  • Partner with the Center Manager if additional work is needed, if the work outlined is not needed, or if repairs cannot be completed within the promised time.
  • Documents all work performed and recommended. Road tests vehicles as needed.
  • Ensures that customers' cars are kept clean. Notify the manager immediately of any damage that has happened to change the appearance or condition of the vehicle.
  • Keeps the shop areas neat, clean and organized.
  • Maintains and is accountable for all store-owned tools and manuals. Returns them to the proper place and in the same condition as they were received.
  • Understands, and comply with federal, state and local regulations, such as hazardous waste disposal, OSHA Right-to-Know -this includes any SOP of our company guidelines and rules.
  • Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management
  • Participates in organization-sponsored training programs.
  • Other tasks as assigned.
Summary/objective

Technician C requires average mechanical knowledge and performs most mechanical tasks assigned to them, including the following jobs or services: brakes, rotors, fluid exchanges, oil change, transmission, differential, cooling system maintenance, repairing and replacing tires and additional services (e.g. wiper blades, air filters, etc.). Technician C communicates with customers, educating them on necessary preventive vehicle maintenance. Additional duties may include some courtesy services, tire repair and replacement services.

  • You are paid an hourly rate and a commission percentage that is standard across the company.
Essential Duties
  • Performs work as outlined on repair order with efficiency and accuracy, in accordance with supervisory direction and factory standards.
  • Diagnoses vehicle problems based on customer complaints and inspection.
  • Examines assigned vehicles to determine if further safety or service work is required or recommended.
  • Partner with the Center Manager if additional work is needed, if the work outlined is not needed, or if repairs cannot be completed within the promised time.
  • Documents all work performed and recommended. Road tests vehicles as needed.
  • Ensures that customers' cars are kept clean. Notify the manager immediately of any damage that has happened to change the appearance or condition of the vehicle.
  • Keeps the shop areas neat, clean and organized.
  • Maintains and is accountable for all store-owned tools and manuals. Returns them to the proper place and in the same condition as they were received.
  • Understands, and comply with federal, state and local regulations, such as hazardous waste disposal, OSHA Right-to-Know -this includes any SOP of our company guidelines and rules.
  • Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management
  • Participates in organization-sponsored training programs.
  • Other tasks as assigned.
Qualifications
Qualifications: Education and/or Experience
  • Minimum of two years related experience and/or training; or equivalent combination of education and experience.
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine tickets, notes and other correspondence.
  • Ability to effectively present information and respond to questions from customers.
  • Valid Driver's License
  • State Emission Certification- if applicable in your state
  • State Vehicle Inspector Certification- if applicable in your state
Physical Demands / Work Environment And Requirements
  • We require tools for this position that enable you to perform the majority of services that you are qualified to perform. You will need to have a toolbox with tools on site.
  • You will be required to sign a contract with our uniform policy and procedure plan.
  • Ability to work in cramped places, such as underneath a jacked-up automobile or a lower bay.
  • Upper body strength and stamina to effectively use hand tools like hammers and wrenches and to make sure that fasteners are properly secured.
  • Fine motor skills to be able to work with small fasteners, such as nuts, bolts, and washers.
  • Vision: Ability to read diagrams, manuals and emails. Often, you are required to work with color-coded wiring.
  • Ability to work in fluctuating and sometimes extreme weather temperatures.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Technician C - FT-1042
Technician C - FT-1042

FullSpeed Automotive • Duluth (GA)

On-site
USD 28,000 - 41,000
Technician C - FT-1019
Technician C - FT-1019

FullSpeed Automotive • Atlanta (GA)

On-site
USD 25,000 - 39,000
Technician C - FT-1044
Technician C - FT-1044

FullSpeed Automotive • Suwanee (GA)

On-site
USD 28,000 - 41,000
Hourly rate
Commission
Technician C - FT 1071
Technician C - FT 1071

FullSpeed Automotive • Sharpsburg (GA)

On-site
USD 28,000 - 41,000
Technician C - FT-8109
Technician C - FT-8109

FullSpeed Automotive • Mobile (AL)

On-site
USD 25,000 - 39,000
Technician A - FT-1027
Technician A - FT-1027

FullSpeed Automotive • Woodstock (GA)

On-site
USD 34,000 - 55,000
Technician A - FT 1030
Technician A - FT 1030

FullSpeed Automotive • Marietta (GA)

On-site
USD 34,000 - 48,000
Technician A - FT 1015
Technician A - FT 1015

FullSpeed Automotive • Woodstock (GA)

On-site
USD 42,000 - 62,000
Technician A - FT-177
Technician A - FT-177

FullSpeed Automotive • Peoria (IL)

On-site
USD 30,000 - 47,000
Technician B - FT 8127
Technician B - FT 8127

FullSpeed Automotive • Allen (TX)

On-site
USD 34,000 - 52,000