Technician 2, Electrical

FUJIFILM Holdings America Corporation

Holly Springs (NC)

On-site

USD 65,000 - 90,000

Full time

14 days+

Get more replies from employers

Send a job-specific resume in minutes.

Job summary

FUJIFILM Biotechnologies in Holly Springs, NC, is seeking a Technician 2, Electrician to operate, maintain, and optimize plant electrical systems within a highly regulated pharmaceutical environment.

You will support 24/7 operations, perform preventive and corrective maintenance on LV/MV switchgear, MCCs, PDPs, UPS, and related equipment, and interpret schematics to ensure reliability and safety across production spaces.

Qualifications

  • HS diploma or GED required.
  • 2+ years electrical experience.
  • Experience troubleshooting, repairing, maintaining, and testing electrical systems.

Responsibilities

  • Supports electrical systems walk down inspections during construction.
  • Supports system walkdowns which interface with Electrical systems post-construction phase.
  • Assists with startup of all electrical gear including Low/Medium Voltage switchgear, MCCs, PDPs, UPS, electrical panels, and end point equipment.
  • Assists in reviewing redline drawings for electrical systems.
  • Interfaces with and supports engineering, operations, and construction teams during both construction and operational phases.
  • Performs electrical maintenance activities for daily operation (Switchgear, MCCs, PDPs, UPS, switchboards, power panels, VFDs, motors).
  • Interprets electrical and electronic circuit blueprints, diagrams, and schematics.
  • Assists with maintenance program development, safety gear selection, and testing equipment selection; participates in training.
  • Partners with procurement to obtain electrical supplies and equipment.
  • Partners with system/reliability engineers to support enhancements and projects.
  • Adheres to EH&S regulations.
  • Assists development of maintenance procedures and plans.
  • Supports operations and emergency work orders after hours as needed.
  • Performs other duties as assigned.

Skills

Electrical troubleshooting
Reading schematics
Preventive maintenance
Safety protocols
24/7 shift support

Education

High School Diploma or GED
Associate’s degree in electrical/technical field (preferred)

Tools

CMMS
Electrical test equipment

Job description

Position Overview

The Technician 2, Electrician is responsible for the operation, maintenance, and optimization of plant electrical systems. This includes but is not limited to medium voltage switch gears, transformers, and low voltage distribution panels. This role monitors and operates process control systems and equipment in assigned process and utility areas and troubleshooting and maintaining the electrical equipment to ensure these systems meet the stringent requirements of pharmaceutical manufacturing and storage environments. This role is part of a team required to support 24/7 operations.

Company Overview

FUJIFILM Biotechnologies is building the future of bioproduction in Holly Springs, North Carolina. By end of 2025, we’ll open North America’s largest end-to-end CDMO biopharmaceutical manufacturing facility, offering drug substance production, fill-finish, and packaging under one roof.

We’re looking for passionate, mission-driven people to help us realize this exciting vision and deliver the next vaccine, cure, or therapy. We offer a dynamic work environment and we’re proud to cultivate a culture that will fuel your purpose, energy, and drive—what we call Genki. Ready to shape the future of medicine? Let’s transform healthcare together!

Holly Springs, North Carolina, combines small-town warmth with proximity to Raleigh’s thriving tech scene, making it the perfect blend of community and opportunity.

Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: https://www.fujifilm.com/us/en/about/region/careers

Job Description

What You’ll Do

  • Supports electrical systems walk down inspections during construction.
  • Supports system walkdowns which interface with Electrical systems post-construction phase.
  • Assists with startup of all electrical gear to include Low and Medium Voltage switchgear, motor control center (MCCs), power distribution panel (PDPs), uninterruptible power supply (UPS), electrical panels, and end point equipment.
  • Assists in the review of redline drawings for electrical systems.
  • Interfaces with and supports engineering, operations, and construction teams during both construction and operational phases.
  • Performs electrical maintenance activities in support of daily operation of the site such as conducting preventative, predictive, and corrective maintenance activities for all electrical systems, such as Switchgear (Low and Medium voltage), MCCs, PDPs, UPS systems, switchboards, power panels, and variable frequency drives (VFDs) and motors.
  • Interprets electrical and electronic circuit blueprints, diagrams, and schematics.
  • Assists with the continued improvement and development of the electrical maintenance program to include safety gear selection, maintenance, and test equipment selection, and participation in the training program.
  • Partners with procurement to obtain needed electrical supplies and equipment.
  • Partners with system engineers and reliability engineers to support equipment enhancements and projects.
  • Adheres to all Quality and Environmental, Health & Safety (EH&S) regulations.
  • Assists in the development of maintenance procedures and plans.
  • Supports site operations and emergency work orders during off-hours, as needed.
  • Performs other duties, as assigned.

Knowledge, Skills, and Abilities

  • Ability to read and interpret design schematics for electrical systems & equipment.
  • Ability to implement Electrical Safety protocols in an industrial environment.
  • Effective communication, both written and oral.
  • Demonstrated interpersonal skills.
  • Must be able to support 24/7 manufacturing facility, including shift, on-call and weekends.

Minimum Qualifications

  • High School Diploma or GED.
  • 2+ years of electrical experience.
  • Experience troubleshooting, repairing, maintaining, and testing electrical systems.

Preferred Qualifications

  • Associate’s degree in electrical, technical, or related degree or U.S. military technical school.
  • Prior experience as an industrial electrical technician.
  • Experience in pharmaceutical or another highly regulated environment.
  • Experience working with contract maintenance teams.
  • Experience using Computerized Maintenance Management System (CMMS).

Physical Requirements:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is required on a regular basis to:

  • Will work in environment which may necessitate respiratory protection.
  • May work in Mechanical/Production spaces that may require hearing protection and enrollment in a hearing conservation program.
  • Will work in environment operating a motor vehicle or Powered Industrial Truck.
  • Ability to discern audible cues.
  • Ability to inspect or perform a task with 20/20 corrected vision, visual acuity, including distinguishing color.
  • Ability to ascend or descend ladders, scaffolding, ramps, etc.
  • Ability to stand for prolonged periods of time for up to 12 hours.
  • Ability to sit for prolonged periods of time for up to 12 hours.
  • Ability to conduct activities using repetitive motions that include wrists, hands, and/or fingers.
  • Ability to operate machinery and/or power tools.
  • Ability to conduct work that includes moving objects up to 33 pounds.
  • Ability to bend, push or pull, reach to retrieve materials from 18” to 60” in height, and use twisting motions.
  • Will work in warm/cold environments.
  • Will work in outdoor elements such as precipitation and wind.
  • Will work in small and/or enclosed spaces.
  • Will work in heights greater than 4 feet.

*LI-Onsite

EEO Information

Fujifilm is committedto providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc.

ADA Information

If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (FDBN_PNC@fujifilm.com).

Get your free, confidential resume review.
or drag and drop your file here.
Similar jobs

Similar jobs worth comparing

Technician 2, Electrical
Technician 2, Electrical

FUJIFILM • Holly Springs (AL)

On-site
USD 65,000 - 90,000
Technician 2, Electrical
Technician 2, Electrical

Merck & Co. • Holly Springs (NC)

On-site
USD 60,000 - 80,000
Electrical Engineer 3
Electrical Engineer 3

FUJIFILM Biotechnologies • Holly Springs (NC)

On-site
USD 80,000 - 100,000
Tech 3, Maintenance - Process & Equipment Technician
Tech 3, Maintenance - Process & Equipment Technician

FUJIFILM Holdings America Corporation • Holly Springs (NC)

On-site
USD 65,000 - 90,000
Engineer 2, Instrumentation & Controls
Engineer 2, Instrumentation & Controls

FUJIFILM Biotechnologies • Holly Springs (NC)

On-site
USD 85,000 - 120,000
Tech 2, Instrumentation & Controls
Tech 2, Instrumentation & Controls

FUJIFILM Biotechnologies • Holly Springs (NC)

On-site
USD 50,000 - 70,000
Tech 1, Instrumentation & Controls
Tech 1, Instrumentation & Controls

FUJIFILM Biotechnologies • Holly Springs (NC)

On-site
USD 40,000 - 60,000
Medical, dental, and vision coverage
401(k) savings plan
Paid vacation and sick time
+1
Supervisor, DSM
Supervisor, DSM

FUJIFILM Biotechnologies • Holly Springs (NC)

On-site
USD 70,000 - 90,000
Engineer 2, Instrumentation & Controls
Engineer 2, Instrumentation & Controls

FUJIFILM Holdings America Corporation • Holly Springs (NC)

On-site
USD 85,000 - 120,000
Tech 2, Instrumentation & Controls
Tech 2, Instrumentation & Controls

FUJIFILM Holdings America Corporation • Holly Springs (NC)

On-site
USD 50,000 - 70,000