Team Lead II, Equipment Technicians- B Shift: 6:00pm-6:00am

IWCO

Chanhassen (MN)

Vor Ort

USD 50.000 - 58.000

Vollzeit

14 Tage+

Eine vollständige Bewerbung in einer Minute

Maßgeschneiderter Lebenslauf und Anschreiben – versandbereit.

Schaffe es an den ATS-Filtern vorbei

Benefits dieser Stelle

Health insurance
401(k) plan
Paid holidays

Zusammenfassung

IWCO Direct - INSTANT WEB, LLC seeks a Team Lead II to supervise daily production operations, coach employees, and ensure tasks meet customer specifications and IWCO standards.

The role demands strong SME capabilities on multiple production machines, hands-on maintenance, and collaboration with management for performance reviews and safety compliance.

Qualifikationen

  • Advanced knowledge of electronics, electrical systems, hydraulics and pneumatics.
  • Strong reading of schematics and wiring diagrams.
  • Proficient with Microsoft Word and Excel; Foundation software a plus.

Aufgaben

  • Assign tasks per customer requirements and production schedules.
  • Provide hands-on support to meet operational goals.
  • Perform complex repairs, set-ups, and rebuilds; fabricate parts for upgrades.

Kenntnisse

SME on equipment
Team leadership
Troubleshooting
Fabrication

Ausbildung

High School diploma
2+ years manufacturing/production
5+ years equipment technician
Lead/supervisory experience in manufacturing

Tools

Foundation software

Jobbeschreibung

Job Category: Production

Requisition Number: TEAML010071

  • Posted : September 22, 2026
  • Full-Time
  • On-site
Locations

Showing 1 location

Description

Overall Summary:

The Team Lead II supports the Equipment Technician supervisor and manager by overseeing daily operations and guiding team members to meet production goals. This role ensures tasks are completed in alignment with IWCO standards, customer specifications, and industry best practices. The Team Lead II also serves as a technical expert on key equipment and plays a vital role in maintaining operational efficiency and safety.

Primary Duties/Responsibilities
  • Assign and direct tasks in accordance with customer requirements and production schedules.
  • Provide hands‑on support to department personnel to achieve operational goals.
  • Serve as a Subject Matter Expert (SME) on at least two pieces of production equipment.
  • Perform complex repairs, set‑ups, and rebuilds; fabricate parts for equipment upgrades.
  • Coordinate installation of new equipment and relocation of existing machinery.
  • Operate and maintain any and all groups of equipment; operate special equipment as necessary.
  • Modify and rebuild existing equipment to improve performance and reliability.
  • Communicate production updates during shift changes to ensure continuity.
  • Identify staffing needs and production issues; proactively resolve errors and elevate concerns.
  • Communicate safety guidelines to employees to ensure compliance with all safety and environmental regulations.
  • Monitor quality standards and verify adherence to proper procedures.
  • Reinforce safety guidelines and ensure compliance with environmental and regulatory standards.
  • Collaborate with the manager on employee performance reviews and development.
  • Ensure employee acknowledgements for company policy updates are completed by staff.
  • Report non‑compliance issues to the shift supervisor and assist in corrective action planning.
  • Maintain cleanliness and organization throughout the department.
  • Support facility maintenance during off‑hours, including HVAC, snow removal, and basic repairs.
  • Attend daily production meetings and coordinate with scheduling to prepare for upcoming jobs.
  • Identify cost‑saving opportunities through alternative sourcing and creative repair solutions.
  • Promote a culture of safety and accountability.
  • Coach, train, and mentor team members to support skill development and performance.
  • Perform other (or other related) duties as applicable or assigned.
  • Strong written and verbal communication skills.
  • Advanced knowledge of electronics, electrical systems, hydraulics, pneumatics, vacuum pumps, and trim systems.
  • High mechanical aptitude with the ability to quickly learn and operate machinery.
  • Proficient in troubleshooting and electrical diagnostics.
  • Skilled in using tools and techniques for equipment repair and fabrication.
  • Ability to read and interpret schematics and wiring diagrams.
  • Proficient in Microsoft Word and Excel; experience with Foundation software is a plus.
  • Strong problem‑solving and mathematical skills; ability to read and apply measurements.
  • Detail‑oriented with a focus on quality and precision.
  • Capable of leading and mentoring others while making independent decisions.
Education and Experience
  • High School graduate or equivalent required; trade school is a plus.
  • 2+ years’ manufacturing/production experience.
  • 5+ years’ equipment technician experience.
  • Prior lead or supervisory experience in a manufacturing capacity, preferably within the direct mail industry.
  • Previous participation on a safety team and/or other safety training a plus.
  • Lean manufacturing and/or quality control training preferred.
Physical Requirements
  • Ability to work 12‑hour shifts, rotating 3 or 4 days per week including weekend rotations.
  • Ability to work overtime when needed.
  • Standar d and non‑clima te‑controlled production environment; exposure to loud noise (PPE is provided).
  • Ability to lift, carry and push/pull up to 35 pounds; occasionally up to 65 pounds.
  • Ability to stand, walk, bend, twist, pivot, crouch, squat, kneel, and stoop for up to 12 hours.
  • Upper extremity motion requirements: fine motor movements, pushing/pulling with arms, grasping and pinching.
  • Lower extremity motion requirements: reaching.
  • Pre‑employment post‑offer comprehensive assessment required.

Salary:
The starting pay range for this position is $36-$42/hr.

At IWCO, base pay is determined by job-related knowledge, skills, credentials, and experience, along with factors such as role scope and location. Candidates seeking compensation outside of the posted range are encouraged to apply and will be considered based on their individual qualifications and/or may be considered for other positions.

Pay is influenced by a variety of factors specific to the position, including market conditions and, in some cases, education, work experience, and certifications. Beyond competitive pay, IWCO is committed to supporting our team members and their families with comprehensive benefits. These may include health, dental, and vision insurance, life insurance, and other wellness programs. Eligible employees also enjoy 401(k) plans, paid holidays, vacation time, sick leave, and more. At IWCO, we invest in you so you can take care of what matters most.

IWCO is an Equal Opportunity Employer. We welcome diversity and provide equal employment opportunities without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, veteran status, or any protected status as defined by law. Accommodations are available for individuals with disabilities upon request. Contact our HR Department for more information.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.

Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

Senior Industrial Controls Supervisor
Senior Industrial Controls Supervisor

IWCO • Chanhassen (MN)

Vor Ort
USD 70.000 - 95.000
Health insurance
Dental insurance
Vision insurance
+5
Equipment Technician- C Shift (6:00am-6:00pm)
Equipment Technician- C Shift (6:00am-6:00pm)

Updated • Chanhassen (MN)

Vor Ort
USD 33.000 - 51.000
Health insurance
Dental insurance
Vision insurance
+4
Senior Equipment Technician – Automated Print/Mail Machinery
Senior Equipment Technician – Automated Print/Mail Machinery

IWCO Direct • Chanhassen (MN)

Hybrid
USD 33.000 - 51.000
Health insurance
Dental insurance
Vision insurance
+3
Equipment Technician
Equipment Technician

IWCO Direct • Chanhassen (MN)

Vor Ort
USD 33.000 - 51.000
Health insurance
Dental insurance
Vision insurance
+3
Supervisor of Technicians- 12:00pm-12:00am
Supervisor of Technicians- 12:00pm-12:00am

IWCO • Chanhassen (MN)

Vor Ort
USD 70.000 - 95.000
Health insurance
Dental insurance
Vision insurance
+5
Supervisor of Technicians- 12:00pm-12:00am
Supervisor of Technicians- 12:00pm-12:00am

IWCO Direct • Chanhassen (MN)

Hybrid
USD 70.000 - 95.000
Health insurance
Dental insurance
Vision insurance
+5
Equipment Technician Apprentice
Equipment Technician Apprentice

IWCO Direct • Chanhassen (MN)

Vor Ort
USD 32.000 - 39.000
Health insurance
401(k) plan
Paid holidays
+1
Lead Operator - Molding, Night Shift
Lead Operator - Molding, Night Shift

ITW • Washington

Vor Ort
USD 70.000 - 90.000
Lead Operator - Molding, Day Shift
Lead Operator - Molding, Day Shift

ITW • Washington

Vor Ort
USD 52.000 - 70.000
Production Supervisor - 2nd Shift
Production Supervisor - 2nd Shift

Alpine, an ITW Company • Litchfield (IL)

Vor Ort
USD 60.000 - 70.000
Generous time off
Medical, dental, and vision insurance
Tuition reimbursement
+2