Tank Welder

US Fusion; Baytown (TX); On-site; USD 41,000 - 70,000; Full time

Job summary

US Fusion is seeking an experienced welder to lay out, fit, and weld metal components such as pipelines, boilers, tanks, and structures. The role requires reading specifications, mathematical calculations, and producing high-quality welds per job specifications.

Essential duties include welding to ASME Section 9 in all positions, operating air arc gouging, hand tools, and rigging, with safety and quality as top priorities. Three years of SMAW/GTAW/Flux Core experience and a test are required.

Qualifications

• Minimum three years’ welding experience with SMAW, GTAW, and Flux Core processes.
• Must pass required welding test as required by the job site.
• Ability to read and interpret blueprints and job specifications.
• Commitment to safety rules and quality standards.

Responsibilities

• Weld in multiple positions following ASME Section 9 requirements.
• Operate air arc gouging and burning torch with minimal grinding.
• Use power tools for welding and fabrication as needed.
• Assess weld joints fit-up and apply proper welding techniques.
• Perform rigging operations and manage equipment for tank repairs.
• Weld lengths and joints to specified feet as per job order.
• Work at heights on tank scaffolds and in confined spaces when required.
• Operate a Man-Lift and comply with respirator requirements as needed.

Skills

Welding SMAW

Welding GTAW

Flux Core welding

Blueprint reading

Math calculations (geometry/trig)

Safety compliance

Education

High School Diploma or GED

Trade School preferred

Tools

Air arc gouging

Portable power tools

GTAW/TIG equipment

Job description

The data you enter in the online application, including the contents of all attachments, is subject to verification. It is your responsibility to ensure that all the information provided in the application is accurate.

Position Description

Summary

Lays out, fits and welds together metal components of such products as pipelines, boilers, tanks, structural steel and vehicles.

Reads, studies and interprets job specifications, plans and blue prints. Uses basic math skills including geometry, trigonometry to make calculations for work. Can complete difficult job tasks according to job specifications with minimal or no supervision.

Essential Functions

• Ability to understand and follow all safety rules and to set an example in Safety, Quality, and Production. Measurable criteria will be used in these areas to determine classification.
• Ability to weld to Section 9 of ASME Code in all positions.
• Operations of air arc-gouging and burning torch that requires limited grinding to complete welding process.
• Operation of all air and electric power tools used in a normal tank repair.
• Ability to recognize the proper fit up of weld joints and ability to understand and follow the outlined method of welding.
• Exemplify proper techniques of rigging.
• Understand the proper use of key plates and fit up equipment to control banding and peaking in horizontal and vertical seams.
• Ability to weld approximately 180 linear feet of acceptable seal pass weld using 5P 3/16" electrodes.
• Ability to weld approximately 250 linear feet of acceptable jet weld on 3/16" and 1/4" CS lap weld using 7024-1 electrodes.
• Ability to weld approximately 130 linear feet of completed 3/8" comer weld using 7/32" 7018 electrodes.
• Ability to weld linear feet of vertical and horizontal weld for the following thickness using 7018 electrodes (completed weld):
• Ability to complete items 8 - 10 with no more than 30 minutes of pickup work per day. *Buttering has not been included.
• *Buttering has not been included.
• Ability to complete item 11 with an acceptable RT rate of 95% or higher.
• Ability to work at elevations above ground level using vertical ladders positioned on tank scaffold and ability to work in shell buggies.
• Ability to perform work under breathing air conditions using required respirator.
• Willingness to perform other tank duties on an as needed basis.
• Ability to work in confined space.
• Operation of a Man-Lift.

Position Requirements

Required Education and Experience:

• Minimum three years’ experience in welding with SMAW, GTAW, and Flux Core process.
• Must pass required welding test as required by the specific job site.

Preferred Education and Experience

• High School or GED preferred but not required.
• Trade School program preferred but not required.

Equal Opportunity Employer

PALA Group, Inc. and its Subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.