Swing Shift Manufacturing Engineer

Torus; Salt Lake City (UT); Vor Ort; USD 80.000 - 120.000; Vollzeit

Benefits dieser Stelle

Equity in compensation

401(k) Retirement Savings

Health benefits

Paid time off

Life insurance

Disability insurance

Peer recognition

Zusammenfassung

Torus is headquartered in Utah and is expanding manufacturing at our facility in Salt Lake City called GigaOne. The Swing Shift Manufacturing Engineer will set up and support our BESS (Torus Pulse) and FESS (Torus Spin) production lines, troubleshoot equipment, and help optimize workflow on the shop floor.

The role requires 1–5+ years in Manufacturing/Industrial Engineering, strong Lean principles, CNC programming, and hands-on fabrication experience.

Qualifikationen

• Strong knowledge of manufacturing best practices, including Lean Manufacturing principles.
• Experience developing new manufacturing processes.
• Experience with industrial automation tools such as PLCs, HMIs, sensors, and motion systems.
• Experience designing tooling, jigs, and/or fixtures using SolidWorks.
• Experience optimizing production processes.
• Experience programming CNC equipment.
• Experience with metal fabrication processes.

Aufgaben

• Support and maintain production equipment: Waterjets, Fiber Lasers, Bending Equipment, and CNCs.
• Support equipment programming.
• Assist with Design Validation Testing and Prototype builds.
• Evaluates manufacturing processes by designing and conducting research programs.
• Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors.
• Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout.
• Assures product and process quality by designing testing methods.
• Provides manufacturing decision-making information by calculating production, labor, and material costs.
• Prepares product and process reports by collecting, analyzing, and summarizing information and trends.
• Lead in the “Design For Manufacturing” and continuous improvement process through the assigned product lines.
• Support product development activities.
• Complete other tasks as necessary.

Kenntnisse

Lean Manufacturing

Process development

Industrial automation

CNC programming

Metal fabrication

Ausbildung

Manufacturing/Industrial Engineering degree

Tools

SolidWorks

Jobbeschreibung

About Torus

Torus is headquartered in Utah and is expanding manufacturing at our 545,000-square-foot facility in Salt Lake City called GigaOne.

Torus is headquartered in Utah and is expanding manufacturing at our 545,000-square-foot facility in Salt Lake City called GigaOne. We are the world’s first mesh energy infrastructure, uniting communities through resilient, sustainable, and intelligent power.

We design, engineer, manufacture, install, and support our systems end-to-end, standing behind them throughout their lifecycle. Torus systems help reduce costs, lower emissions, and protect facilities from outages, while strengthening the security and reliability of the broader utility grid. Torus is committed to American manufacturing, engineering excellence, and building energy systems that last.

Torus has raised over $267 million from investors like Magnetar, Mercado, ICONIQ and Origin Ventures. The investments are helping to accelerate deployment of modular power plants across utilities, data centers, and industrial sectors. This investor confidence reflects the strength of our team, technology as well as the scale of the problem we are solving.

At Torus, you will be part of something larger than a single product or technology. Your work will help build energy infrastructure that supports and strengthens our electrical grid, critical systems, industry, and communities for decades to come. We value accountability, collaboration, and clear thinking. We are looking for people who want to solve hard problems and build things that matter.

About The Role

As a Swing Shift Manufacturing Engineer, you will be a key player in setting up and supporting our manufacturing processes. The Engineer is responsible for supporting the manufacturing and fabrication of our BESS (Torus Pulse) and FESS (Torus Spin) products. The role is responsible for troubleshooting and maintaining manufacturing equipment, designing manufacturing fixtures, building & optimizing production flows, automating processes, and other similar duties. As a start up, there will be times when this role will require work outside its typical duties.

Responsibilities

• Support and maintain production equipment: Waterjets, Fiber Lasers, Bending Equipment, and CNCs


• Support equipment programming.


• Assist with Design Validation Testing and Prototype builds


• Evaluates manufacturing processes by designing and conducting research programs.


• Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors.


• Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout.


• Assures product and process quality by designing testing methods.


• Provides manufacturing decision-making information by calculating production, labor, and material costs.


• Prepares product and process reports by collecting, analyzing, and summarizing information and trends.


• Lead in the “Design For Manufacturing” and continuous improvement process through the assigned product lines.


• Support product development activities.


• Complete other tasks as necessary.

Required Experience

• Strong knowledge of manufacturing best practices, including Lean Manufacturing principles


• Experience developing new manufacturing processes


• Experience with industrial automation tools such as PLCs, HMIs, sensors, and motion systems


• Experience designing tooling, jigs, and/or fixtures using SolidWorks


• Experience optimizing production processes


• Experience programming CNC equipment


• Experience with metal fabrication processes.


• Manufacturing/Industrial Engineering degree or related field is required


• 1-5+ years related experience (or equivalent)

Preferred Experience

• Experience designing and modeling the following in SolidWorks: sheet metal, tube laser, and steel structures are preferred


• Hands‑on building and fabricating are preferred

Our Perks & Benefits

• Employee Rewards Package including equity


• 401(k) Retirement Savings Plan


• Health Benefits Package: Choice between traditional PPO or HSA eligible medical plans; Dental insurance; and Vision insurance


• Human-centered Paid Time Off (based on employment status) including unlimited discretionary PTO; 10-days paid company holidays; Waiting period-free 100% paid parental leave.


• Torus paid Life with option to purchase additional coverage


• Voluntary Short- and Long-Term Disability Insurance


• Peer Recognition Program

Additional Details

All candidates are subject to a background check.

Location + Travel

The role based in our GigaOne Salt Lake Headquarters Warehouse, and our South Salt Lake R&D Location, both located in Salt Lake City, UT.

Schedule

Full-Time, Salaried

Compensation

$80,000 - $120,000 (Note: We have the flexibility to hire at different levels, which may impact the corresponding pay range.)

Shift Differential

10% on top of base salary

Work Authorization

Applicants must already have the legal authorization to work in the US without requiring any employer sponsorship.

Physical Requirements

• Must have the ability to safely lift and move objects weighing up to 50 lbs.


• Must be capable of standing, bending, and executing repetitive tasks for prolonged periods of time.


• Ability to read, identify, observe and recognize details, color-coding and fine print at close range on associated engineering drawings.


• Ability to don personal protective equipment to include, but not limited to, respiratory protective equipment with proper seal, coveralls, ear protection, gloves, eye protection & safety helmet.


• Ability to observe, detect and respond to audible and visual machine malfunction warnings.


• Ability to communicate information so others can understand. Must be able to exchange accurate information in these situations.


• Must report to work reliably and with the ability to use full and unimpaired skills and judgment to safely execute your job.


• Proficiency in reading, writing, and speaking English required.

Torus is proud to be an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.