Stock Fab Welder in Berlin Heights

Energy Jobline ZR

Berlin Heights (OH)

On-site

USD 40,000 - 66,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

AutoGate, Inc. in Berlin Heights, Ohio seeks an experienced welder who primarily uses MIG to weld aluminum and steel components per prints and travelers. You will assemble parts, tack and finish welds, and ensure clean, compliant results in a timely manner.

The role emphasizes reading blueprints, securing materials and tooling, inspecting finished parts, and maintaining safe operation of equipment. Physical demands include standing, lifting, and PPE use as required.

Qualifications

  • High School Diploma or GED, or 3–6 months related experience.
  • Able to read and interpret simple instructions and blueprints.
  • Capable of reading a tape measure to 32nds of an inch and using calipers/micrometers.
  • Willing to stand, lift up to 50 pounds and wear PPE.

Responsibilities

  • Review prints and quantity requirements and secure appropriate materials, tooling and equipment to produce quality parts in a timely manner.
  • Utilize fixtures, jigs, and tools to secure component parts safely and correctly for fabrication.
  • Tack welds pieces as necessary, then welds complete and/or weld parts complete, always operating equipment safely and per specifications.
  • Break all sharp edges and remove weld spatter. Clean or degreases parts if required.
  • Record time, quantities, and materials accurately on paperwork and in production software system.
  • Inspect parts as required to assure quality product is being produced.

Skills

Blueprint reading
Basic math
Written and verbal communication
Quality inspection

Education

High School Diploma or GED

Tools

Calipers
Micrometers
Tape measure

Job description

Job DescriptionJob Description
Summary:

Welds primarily aluminum and steel component parts to comply with specifications as listed in standard prints, custom blue prints, job travelers, or other work instructions. Does so in a timely and effective manner using primarily M.I.G. welding equipment.

Essential Duties and responsibilities:
  • Physical presence at work is an essential job function for this position.
  • Reviews part prints and quantity requirements and secures appropriate materials, tooling and equipment to produce quality parts in a timely manner.
  • Utilizes fixtures, jigs, and tools to secure component parts safely and correctly for fabrication.
  • Tack welds pieces as necessary, then welds complete and/or weld parts complete directly, always operating equipment safely and per manufacturers and Autogate’s requirements or specifications.
  • Break all sharp edges and remove weld spatter. Cleans or degreases parts if required.
  • Records time, quantities, and materials accurately on paperwork and in production software system.
  • Inspects parts as required to assure quality product is being produced.
  • Immediately notifies supervisor if component parts or parts being made are nonconforming or there is an issue making quality product.
  • Other duties may be assigned.
Supervisory Responsibilities:

This position has no supervisory responsibilities

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to ten (10) pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, vision and ability to adjust focus.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is frequently exposed to fumes or airborne particles and risk of electrical shock. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually moderate.

Education/Experience

High School Diploma or General Education Degree (GED); or three (3) to six (6) months related experience and/or training in similar environment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Skills

Ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.

Mathematical Skills

Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Must be able to read a blueprint and read a tape measure to 32nds of an inch. Ability to use and read measuring devices such as calipers and micrometers is .

Reasoning Ability

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

Expectations
  • All employees should report to work as scheduled refreshed and prepared to be productive
  • Employees should display honesty, fairness, integrity, and compassion
  • Employees should contribute to making the work environment safe
  • Employees should display respect for self, others, the AutoGate brand
  • Employees should seek to contribute to the overall quality of the product, display integrity, and seek areas for continuous and product improvement.
  • Employees should be passionate about their job, and be aware of their contributions to the success of the company
Personal Protective Equipment

The person performing this job function is required to wear safety glasses with side shields at any time that are performing any duties in the production area of the shop. The person performing this job function is required to wear safety shoes and a welding helmet when welding.

Company Description

AutoGate, Inc. is located near the shores of Lake Erie in Berlin Heights Ohio. We are a family-owned business founded in 1986. With a reputation for quality, we are the leading manufacturer of Vertical Pivot Gate systems. In addition to manufacturing the first UL 325 compliant vertical pivot gate operator, we also offer a full line of reversing/safety, accessory, and access control devices.

AutoGate, Inc. is located near the shores of Lake Erie in Berlin Heights Ohio. We are a family-owned business founded in 1986. With a reputation for quality, we are the leading manufacturer of Vertical Pivot Gate systems. In addition to manufacturing the first UL 325 compliant vertical pivot gate operator, we also offer a full line of reversing/safety, accessory, and access control devices.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Industrial Painter
Industrial Painter

AutoGate, Inc. • Berlin Heights (OH)

On-site
USD 21,000 - 30,000
Stock Fab Welder
Stock Fab Welder

AutoGate Inc • Berlin Heights (OH)

On-site
USD 25,000 - 39,000
MIG Welder - Aluminum & Steel Fabrication Pro
MIG Welder - Aluminum & Steel Fabrication Pro

Energy Jobline ZR • Berlin Heights (OH)

On-site
USD 40,000 - 66,000
MIG Welder - Aluminum & Steel Parts (Day Shift)
MIG Welder - Aluminum & Steel Parts (Day Shift)

AutoGate Inc • Berlin Heights (OH)

On-site
USD 25,000 - 39,000
Building Manager / Supervisor-Weld Shop (Fort Wayne, IN)
Building Manager / Supervisor-Weld Shop (Fort Wayne, IN)

Ottenweller Company, Inc. • Fort Wayne (IN)

On-site
USD 60,000 - 90,000
Welder
Welder

Tommy Gate • Woodbine (IA)

On-site
USD 29,000 - 32,000
Professional growth programs
Health care and dental/vision
Paid holidays
+4
Field Welder: Gates & Fabrication Expert
Field Welder: Gates & Fabrication Expert

Guardian Access • Orlando (FL)

Hybrid
USD 40,000 - 65,000
Robot Programmer
Robot Programmer

Magline • Standish (MI)

On-site
USD 42,000 - 65,000
Paid holidays
Vacation leave
Medical insurance
+6
Welding Operator
Welding Operator

Flex N Gate • Illinois

On-site
USD 30,000 - 43,000
Medical, dental, vision, life and +dis
401(k) with company match
Safety training and development
+1
Assistant Press Weld Operator
Assistant Press Weld Operator

FactoryFix • Twinsburg (OH)

On-site
USD 21,000 - 32,000