Steel Bandsaw Operator - 1st Shift

Bentley welding; Greeley (CO); On-site; USD 30,000 - 34,000; Full time

Benefits offered by this job

Medical, dental and vision insurance

401(k) retirement plan with company 
%

Paid time off (PTO)

Life and disability Insurance

Job summary

Bentley Mission Critical, located in Greeley, Colorado, is seeking a Steel Bandsaw Operator to accurately cut structural steel and prepare kits for fabrication. The role ensures parts are cut to tolerance, properly labeled, and staged to meet production demands on a 6:00am–2:30pm first shift.

You will verify material specs, maintain equipment, and sustain a safe, clean work area while supporting timely project delivery for data center infrastructure. Prior saw experience is preferred.

Qualifications

• Read and interpret cut lists and work orders.
• Proficient with tape measure (1/16" accuracy) and basic dimensional tools.
• Mechanical aptitude and willingness to learn saw setup and maintenance.
• Strong attention to detail and proactive work habits.
• Ability to stand for long periods and lift up to 50 lbs.
• Prior saw or metal cutting experience preferred.

Responsibilities

• Read and interpret project cut lists, including material type, size, quantity, and tolerances.
• Plan and sequence cuts in logical kitting order.
• Stay ahead of production demand by reviewing upcoming work orders.
• Communicate unclear cut list information or material shortages immediately.
• Prioritize rush or hot jobs without losing track of the schedule.
• Verify raw material grade, size, and heat number before cutting.
• Pull material from correct storage locations; return drops properly labeled.
• Maximize material yield through efficient cut sequencing.
• Tag remnants clearly for future use.
• Notify supervisor when stock levels are low.
• Set up and operate horizontal/vertical bandsaws.
• Adjust blade speed, feed rate, and coolant flow appropriately.
• Verify length stop before cutting full quantities.
• Secure workpieces properly to prevent movement.
• Recognize blade wear and replace before quality is affected.
• Operate within machine capacity.
• Measure completed cuts to verify length and squareness.
• Maintain consistency of accuracy.
• Inspect cut ends for burrs, twist, or out-of-square conditions.
• Reject and mark nonconforming pieces.
• Mark cut parts with piece mark, job number, material size, and quantity.
• Stage and organize cut kits clearly and logically.
• Bundle or band parts safely to prevent mixing.
• Notify fabrication lead when kits are ready.
• Perform daily pre-operation inspections.
• Change blades safely and dispose of worn blades properly.
• Keep saw area clean and free of chips and debris.
• Report equipment issues immediately.
• Perform basic preventive maintenance.
• Wear required PPE at all times.
• Follow lockout/tagout procedures.

Skills

Cut list interpretation

Tape measure accuracy

Mechanical aptitude

Attention to detail

Lifting up to 50 lbs

Saw operation experience

Tools

Bandsaw operation

Blade replacement

Measuring tools

Job description

Description

About Bentley Mission Critical

Bentley Mission Critical manufactures factory-built infrastructure for the world’s most demanding data centers. From our ISO 9001:2015 certified facility in Greeley, Colorado, we engineer, fabricate, and test complete modular data center systems - pre-integrating mechanical, electrical, and plumbing systems in a controlled factory environment to deliver projects 30-50% faster than traditional construction. Our customers include hyperscale, AI/GPU compute, colocation, and enterprise data center operators. We don't build projects - we manufacture products, and we do it quality-driven, on time, every time.

We are growing fast, and our people are the reason. This role exists to make sure that as we scale, we stay a place where skilled, motivated people want to build their careers.

Position Summary

The Steel Bandsaw Operator is responsible for accurately cutting structural steel - including flat bar, square bar, round bar, angle, channel, beam, tube, and pipe - to the lengths and tolerances specified on project cut lists. This role is the first critical step in the production process: parts must be cut correctly, labeled clearly, and kitted in a logical sequence so fabrication crews always have what they need before they need it.

Performance Expectations

• Cut parts consistently meet dimensional tolerances.
• Fabrication floor is never waiting on cut material.
• Kits are complete, labeled, and staged correctly.
• Scrap is minimized through efficient cut planning.
• Saw area is clean and equipment maintained.
• Production Standard: Accuracy, organization, and staying ahead of schedule are non-negotiable.

1st Shift Hours: 6:00am-2:30pm

*Must be 18 years or older to apply*

Key Responsibilities

Cut List Interpretation & Work Planning

• Read and interpret project cut lists, including material type, size, quantity, and tolerances.
• Plan and sequence cuts in logical kitting order.
• Stay ahead of production demand by reviewing upcoming work orders.
• Communicate unclear cut list information or material shortages immediately.
• Prioritize rush or hot jobs without losing track of the schedule.

Material Identification & Stock Management

• Verify raw material grade, size, and heat number before cutting.
• Pull material from correct storage locations; return drops properly labeled.
• Maximize material yield through efficient cut sequencing.
• Tag remnants clearly for future use.
• Notify supervisor when stock levels are low.

Bandsaw Setup & Operation

• Set up and operate horizontal/vertical cold-cut bandsaws.
• Adjust blade speed, feed rate, and coolant flow appropriately.
• Verify length stop or measuring system before cutting full quantities.
• Secure workpieces properly to prevent movement.
• Recognize blade wear and replace before quality is affected.
• Operate within machine capacity.

Dimensional Accuracy & Quality

• Measure completed cuts to verify length and squareness tolerances.
• Maintain consistent accuracy throughout the shift.
• Inspect cut ends for burrs, twist, or out-of-square conditions.
• Reject and mark any nonconforming pieces.

Part Labeling & Kitting

• Mark all cut parts with piece mark, job number, material size, and quantity.
• Stage and organize cut kits clearly and logically.
• Bundle or band parts safely to prevent mixing.
• Notify fabrication lead when kits are ready.

Equipment Maintenance & Housekeeping

• Perform daily pre-operation inspections.
• Change blades safely and dispose of worn blades properly.
• Keep saw area clean and free of chips and debris.
• Report equipment issues immediately.
• Perform basic preventive maintenance.

Safety

• Wear required PPE at all times.
• Never reach into cutting zone while blade is moving.
• Use proper lifting techniques and mechanical assists.
• Keep aisles clear to prevent hazards.
• Follow lockout/tagout procedures.

The physical demands and work environment described below are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

• Extended standing and walking on concrete floors.
• Frequent handling and measuring of steel material.
• Ability to lift up to 50 lbs. independently.
• Exposure to noise, coolant, metal chips, and temperature variations.

Benefits

Offers a competitive salary and a comprehensive benefits package:

• Medical, dental and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO)
• Life and disability Insurance

Benefits may vary based on employment classification and hours worked.

Equal Opportunity Employer

Bentley Mission Critical is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by law.

Requirements

Required

• Ability to read and interpret cut lists and work orders.
• Proficient with tape measure (1/16\" accuracy) and basic dimensional tools.
• Mechanical aptitude and willingness to learn saw setup and maintenance.
• Strong attention to detail and proactive work habits.
• Ability to stand for long periods and lift up to 50 lbs.
• Prior saw or metal cutting experience preferred.

Preferred

• Experience in structural steel fabrication or metal manufacturing.
• Familiarity with structural steel shapes.
• Experience with production scheduling or kitting.
• Forklift or crane operation experience.
• Basic knowledge of material grades.