Station Servicer C-A

AEP Texas Company, Inc.

Childress (TX)

On-site

USD 43,000 - 45,000

Full time

6 days ago
Be an early applicant
Application generator

Turn this role into an interview — a resume and cover letter built around what this employer wants.

Get past ATS filters

Job summary

American Electric Power (AEP) in Texas seeks a Station Electrician/Servicer to inspect, maintain and test energized and de-energized station facilities. You will join a team ensuring safe operation and rapid response to emergencies and outages.

The role requires an associate degree or military equivalent in maintenance, a valid CDL, and ability to read drawings, wire up components, and perform field tests with standard equipment. Occasional travel and overtime may be required.

Qualifications

  • Associate degree or military equivalent in electrical/mechanical/industrial maintenance tech or related experience.
  • Valid commercial driver license required.
  • Ability to read prints/drawings and apply instructions.
  • Willingness to travel and work overtime as needed.

Responsibilities

  • Work on energized equipment up to 260 volts.
  • Assist in work on conductors/equipment energized above 750 volts with supervision.
  • Select prints/drawings and understand layouts.
  • Use voltmeters, ohmmeters, ammeters, and insulation megger for tests.
  • Disassemble/assemble, inspect, maintain, and repair station transformers, breakers, substations, rotating machinery, and related equipment.
  • Install conduit, cable, and wire; perform mechanical and physical tasks (dig, backfill, lift, climb).
  • Read gauges and perform start/run/stop tests on emergency generators and pumps.
  • Maintain safety rules, document work, and support station communication systems.

Skills

Print reading
Communication
Safety compliance
CDL license
Planning work
Teamwork

Education

Associate degree in electrical/mechanical/industrial maintenance technology

Tools

Voltmeter
Ohmmeter
Ammeter
Insulation megger

Job description

Job Posting End Date10-15-2026Please note the job posting will close on the day before the posting end dateJob SummaryParticipate in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Work with existing Station Servicer in assigned area to inspect and maintain assigned station facilities with expectation to progress to Station Servicer in the assigned area. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required. The following list sets forth the principal duties required with the degree of supervision normally given. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below.Job DescriptionWHAT YOU'LL DO:Work on energized equipment up to 260 volts. After six months in classification, employee shall assist in work on conductors and equipment energized at voltages above 750 volts with direct supervision or assistance of personnel in higher classification.Select proper prints and/or drawings for various work and have a basic understanding of each.Use voltmeters, ohmmeters, ammeters, insulation meggers and other test equipment associated with station work.Assist in disassembling and reassembling, inspecting, maintenance, and repairing of station transformers, circuit breakers, portable substations, rotating machinery, network protectors and transformers, air ducts and heat exchangers; install and maintain station batteries; replace nitrogen bottles and air filters.Assist in station work such as installing conduit, pipe, cable and wire; use hand lines to pass tools and materials; dig and backfill trenches; remove and spread stone; uncrate equipment and material; install and remove portable substation fences, barriers and safety signs; paint structures and equipment; climb station structures.Use various kinds of tapes, insulating materials, protective and insulating paints and varnishes, and understand proper application of each.Assist in making visual inspections such as check lights, heaters, circuit breaker counters, oil levels, and bus connections; read gauges such as voltmeters, ammeters, hydrometers, pressure and level gauges; apply start- run-stop tests on emergency generators, water and sump pumps and fire engine motors. Report abnormal conditions.Replace lamps, switches, duplex outlets, dry cells; install and maintain signal and communication systems.Assist in various tests involving oil samples, connecting and operating portable and stationary oil handling equipment. Assist in electrical tests, TTR, Doble, core megger and resistance for transformer testing, etc.Become familiar with Company DC Supply Procedures to ensure NERC Compliance and proper equipment operation. Assist area personnel on DC Supply Installations and repair work while ensuring proper documentation.Become familiar with Company Station Communication System Procedures to ensure NERC Compliance and proper equipment operation. Assist area personnel while performing inspections on such equipment. Station Communication equipment consists of radios, carrier current, telemetering, pilot wire and control equipment, and other required communication systems identified by NERC.Assist in station switching including use of radio communication and/or direct instruction from higher classification, assist in checking equipment clearances and making de-energized tests, place grounds as directed.Gain knowledge and proficiency in steel and aerial lift rescue.Maintain records and prepare and submit reports as required.Attend and participate in training and assist in the training of other employees as assigned.Use and operate various company vehicles, specialized equipment, hand and power tools.Operate company vehicles, cranes, aerial lifts and specialized equipment. Perform duties incidental to the operation of such equipmentUse hand and power tools; operate portable generators, blowers and pumps; inspect and store personal protective equipment.Knowledge and use of various knots used in station work.Perform similar or less skilled work as assigned.Assist employees of equal or higher classification; direct the work of employees assigned to assist.Become familiar with the Company's safety rules and practicesWHAT WE'RE LOOKING FOR:Education requirements are listed below:Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience. Equivalent education and experience is limited to military training and work experience of technical/technician nature(such as aviation and nuclear instrumentation technician); or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor.Work Experience requirement listed below:No previous work experience required.Required License(s)/Certification(s) are listed below:Must possess and maintain a valid commercial driver license. Must meet all vehicle operation requirements as designated by federal and/or state law.OTHER REQUIREMENTS:Knowledge of print reading sufficient to interpret and apply information from drawings, instruction manuals, one-line diagrams, and associated documents.Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression or vacate the current classification.Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Station Servicer) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company.Ability to deal with customers and other employees in a courteous and professional manner.Ability to plan work and to properly instruct and brief others. Employee shall obtain the appropriate valid commercial driver's license prior to the end of the designated probationary period.Must meet all vehicle operation requirements ad designated by federal and/or state law.Employee Shall spend approximately 25% of their time working with an employee performing station inspections, by assisting in station facility inspections, switching, and call-outs at station facilities.Considerable travel and overtime may be required to complete work assignments.Must successfully complete the Physical Abilities Test(PAT)PHYSICAL DEMANDS:physical demands required for this job include but not limited to:1) Exposure to environmental conditions such as weather, hazardous conditions and uneven terrain2) Working at heights, climbing ladders and frequent walking3) Ability to operate vehicles, heavy equipment and mechanized devices4) Occasional lift up to 65 pounds and frequently lift up to 50 pounds.Minimum Requirement Station Electrician/ Servicer Amount of Weight Lifted from Floor/Ground to Waist Level: 75 Amount of Weight to be Carried for 20 Feet 60 Amount of Weight Lifted to Chest Level: 50 Amount of Weight Lifted to Eye Level: 30 Distance to Walk Accumulated over the Course of an 8-Hour Shift: ½ Mile Distance in Feet to Climb and Work on a Ladder/Structure: 50 and Higher Distance in Feet to Ascend to and Work in a Bucket/Lift: 100 and Higher (Tested at 60’) Ability to Discriminate between Colors: Yes (Tested)Compensation DataCompensation Grade:N004-150Compensation Range:$31.33 - $33.09The Physical Demand Level for this job is: H – Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work.Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one.It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Station Electrician C- A
Station Electrician C- A

Public Service Co. of OK • Bartlesville (OK)

On-site
USD 47,000 - 81,000
Station Crew Supv NE
Station Crew Supv NE

AEP Service Corporation • Roanoke (VA)

On-site
USD 66,000 - 85,000
Comprehensive benefits package
Station Electrician C-A
Station Electrician C-A

Public Service Co. of OK • Weatherford (OK)

On-site
USD 45,000 - 77,000
Service Mechanic D
Service Mechanic D

AEP Texas Company, Inc. • San Angelo (TX)

On-site
USD 41,000 - 44,000
Station Electrician C-A
Station Electrician C-A

AEP Texas Company, Inc. • McCamey (TX)

On-site
USD 47,000 - 50,000
System Operator Associate
System Operator Associate

AEP Service Corporation • New Albany (OH)

On-site
USD 75,000 - 99,000
P&C Electrician C-A
P&C Electrician C-A

Public Service Co. of OK • Bartlesville (OK)

On-site
USD 44,000 - 83,000
Control Technician-Jr
Control Technician-Jr

AEP Service Corporation • Proctor (WV)

On-site
USD 44,000 - 48,000
Maintenance Mechanic-Junior
Maintenance Mechanic-Junior

AEP Service Corporation • Proctor (WV)

On-site
USD 69,000 - 73,000
P&C Electrician C-A
P&C Electrician C-A

American Electric Power (AEP) • Bartlesville (OK)

On-site
USD 45,000 - 83,000