Station Electrician C-A

AEP; Indiana; On-site; USD 41,000 - 44,000; Full time

Benefits offered by this job

Generous time off

Competitive pay

Educational opportunities

Job summary

AEP in Dale, IN is seeking skilled Station Electricians to perform maintenance, installation, and testing of electrical transmission and distribution facilities. The role involves climbing structures, operating specialized equipment, and working with energized systems under supervision.

Expect travel >50% and overtime; must have CDL and meet physical demands. Starting pay ranges by level, with comprehensive benefits and opportunities for training and advancement.

Qualifications

• Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience.
• Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician).
• Recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor.

Responsibilities

• Work on energized equipment up to 260 volts; after six months, assist with higher voltages under supervision.
• Select prints/drawings and understand basics of each.
• Use test equipment such as voltmeters, ohmmeters, ammeters, insulation megger.
• Disassemble/repair station transformers, circuit breakers, portable substations and rotating machinery.
• Install/maintain station batteries; replace nitrogen bottles and air filters.
• Install conduit, pipe, cable and wire; dig trenches; move equipment; set up safety signs.

Education

Associate degree in electrical/mechanical/industrial maintenance technology

Military training or equivalent technical experience

Recent experience as Station Electrician or equivalent in utilities/contractor

Job description

Category : Technical Speciality/Skilled Trades

Job Summary

Perform all types of work involved in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required. The following list sets forth the principal duties required with the degree of supervision normally given. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task. IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. GENERAL SUPERVISION - An employee of equal or higher classification, knowledgeable of the task at hand and not necessarily at the job site. QUALIFIED PERSON - Station Electrician or Supervisor who is knowledgeable of the task or work to be performed, and is capable of performing the appropriate emergency rescue.

Job Description

What you’ll do:

• Work on energized equipment up to 260 volts. After six months in classification, employee shall assist in work on conductors and equipment energized at voltages above 750 volts with direct supervision or assistance of personnel in higher classification.

• Select proper prints and/or drawings for various work and have a basic understanding of each.
• Use voltmeters, ohmmeters, ammeters, insulation meggers and other test equipment associated with station work.

• Assist in disassembling and reassembling, inspecting, maintenance, and repairing of station transformers, circuit breakers, portable substations, rotating machinery, network protectors and transformers, air ducts and heat exchangers; install and maintain station batteries; replace nitrogen bottles and air filters.
• Assist in station work such as installing conduit, pipe, cable and wire; use hand lines to pass tools and materials; dig and backfill trenches; remove and spread stone; uncrate equipment and material; install and remove portable substation fences, barriers and safety signs; paint structures and equipment; climb station structures.

• Use various kinds of tapes, insulating materials, protective and insulating paints and varnishes, and understand proper application of each.

• Assist in making visual inspections such as check lights, heaters, circuit breaker counters, oil levels, and bus connections; read gauges such as voltmeters, ammeters, hydrometers, pressure and level gauges; apply start-run-stop tests on emergency generators, water and sump pumps and fire engine motors. Report abnormal conditions.

• Replace lamps, switches, duplex outlets, dry cells; install and maintain signal and communication systems.
• Assist in various tests involving oil samples, connecting and operating portable and stationary oil handling equipment. Assist in electrical tests, TTR, Doble, core megger and resistance for transformer testing, etc.

• Assist in station switching including use of radio communication and/or direct instruction from higher classification, assist in checking equipment clearances and making de-energized tests, place grounds as directed.
• Knowledge and proficiency in steel and aerial lift rescue.
• Maintain records and prepare and submit reports as required.
• Attend and participate in training and assist in the training of other employees as assigned.
• Use and operate various company vehicles, specialized equipment, hand and power tools.

• Operate company vehicles, cranes, aerial lifts and specialized equipment. Perform duties incidental to the operation of such equipment
• Use hand and power tools; operate portable generators, blowers and pumps; inspect and store personal protective equipment.
• Knowledge and use of various knots used in station work.

• Perform similar or less skilled work as assigned.
• Assist employees of equal or higher classification; direct the work of employees assigned to assist.
• Become familiar with the Company's safety rules and practices and in the application of resuscitation and First Aid as presented in the Company's Safety Manual. Perform duties in accordance with the Company's safety rules and operating regulations and practices.
  

What we’re looking for:

Minimum Requirements for a Station Electrician C:

Education requirements are listed below:

• Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience
• Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);
• or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor.

Work Experience requirement listed below:

• No previous work experience required.
  

Minimum Requirements for a Station Electrician B:

Education requirements are listed below:

• Two-year associate degree electrical/mechanical/industrial maintenance technology or equivalent education and/or experience.
• Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);
• or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another electric utility or contractor.

Work Experience requirement listed below:

• Minimum of 24 months satisfactory work experience as a Station Electrician C or the equivalent (as determined by the Company through demonstration, examination and performance appraisal).

Licenses/Certifications:

• Valid Class A CDL is required
  

Minimum Requirements for a Station Electrician A:

• Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience.
• Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);
• or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another electric utility or contractor.

Experience:

• Minimum of 24 months satisfactory combined work experience as a Station Electrician B or Station Electrician B-Certified or the equivalent (as determined by the Company through demonstration, examination and performance appraisal).

Licenses/Certifications:

• Valid Class A CDL is required
  

Additional requirements for all levels:

• Must be available to work overtime, call-out overtime and shift work, as required.
• Travel requirements are expected > 50 % of the time
• Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression or vacate the current classification.
• Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Station Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company.
• Ability to deal with customers and other employees in a courteous and professional manner.
• Ability to plan work and to properly instruct and brief others.
• Must meet all vehicle operation requirements ad designated by federal and/or state law.
• Considerable travel and overtime may be required to complete work assignments.
• Must successfully complete Physical Abilities Test (PAT)
• Successful candidate must live within a 45-minute safe driving distance of the Dale, IN facility.
  

What you’ll get:

Station Electrician C starting at $30.12/hour

Station Electrician B starting at $37.33/hour

Station Electrician A starting at $56.36/hour

What you’ll get:

In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.

Where Putting the Customer First Powers Everything We Do!

At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!

Compensation

$30.12 - $31.81

Physical Demands

The Physical Demand Level for this job is: H – Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force fr equently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work.

Equal Employment Opportunity

It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

“Knowing that I am part of team that is making the power grid safer and more reliable gives me a real sense of responsibility and enthusiasm for coming to work every day.”

Perform work involved with the installation, rearrangement, maintenance, operation, removal, and inspection of electrical transmission and distribution facilities, drive and operate line trucks and associated auxiliary equipment. All job duties apply to overhead and underground equipment and facilities. The Line Mechanic C builds upon the skills, abilities and knowledge learned as a Line Mechanic D (or equivalent).

Perform technical and specialized work of a skilled nature in connection with electrical and control systems; analysis, detection and repair of single loop control systems , electronic devices, communication systems, and instruments such as meters, gauges and regulators; assist others in making tests, surveys and layout work and the development of reports documenting results.

Perform work in the checking, inspecting, repair, maintenance, installation and construction of plant equipment and structures.

AEP offers generous time off, competitive pay, and educational opportunities to help employees advance their careers.

Our culture is purpose-driven and team-oriented: we combine innovation with a customer-first focus to deliver reliable energy and brighter futures.