Staff Steering Engineer, Chassis

Rivian Automotive

Tustin (CA)

On-site

USD 150,000 - 210,000

Full time

9 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Rivian Automotive seeks a Staff (Lead) Steering Engineer for Chassis to own the steering architecture and hardware across vehicle programs, from concept to production sign-off. You will lead decisions on steering columns, intermediate shafts, EPAS racks/gears, and steer-by-wire technologies, while guiding cross-functional teams and supplier partners.

The role requires deep steering engineering expertise, systems thinking, and the ability to influence without authority.

Qualifications

  • Bachelor’s degree in Mechanical Engineering or related field.
  • Experience leading steering engineering across multiple programs (concept to production).
  • Knowledge of steering components (columns, shafts, EPAS racks/gears, tie rods, fasteners).

Responsibilities

  • Spearhead End-to-End Architecture & Development for complex steering systems, including SbW.
  • Manage Requirements Lifecycle across cross-functional teams (Dynamics, Controls, Safety, Software, ADAS).
  • Drive design optimization using first-principles, CATIA V6/3DEXPERIENCE, CAE, and trade studies.
  • Own Validation Strategy & DFMEA; define test methods and acceptance criteria.
  • Lead Advanced Problem-Solving from containment to root cause and prevention.
  • Direct Supplier Technical Development and review supplier test plans for total-system solutions.
  • Represent Steering in Gateway Reviews with clear risks and recovery plans.
  • Champion Engineering Standards and elevate steering engineering rigor.
  • Mentor engineers to improve quality and consistency of deliverables.
  • Manage Concurrent Workstreams across multiple programs and travel as needed.

Skills

Steering system design
DFMEA
DVP&R
Cross-functional leadership
First-principles problem solving
Supplier engagement
CATIA V6
3DEXPERIENCE

Education

Bachelor’s degree in Mechanical Engineering

Tools

CATIA V6
3DEXPERIENCE

Job description

About Us

Rivianis on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract.

As a company, we constantly challenge what’s possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations.

Role Summary

Join Rivian’s Vehicle Hardware Engineering — Chassis — Product Development team as the Staff (Lead) Steering Engineer for Chassis. This RIV-6 role will provide technical leadership for the development and integration of steering systems and hardware across Rivian vehicle programs, from early concept through production release, launch, and engineering sign-off.

You will own complex steering system and component decisions, define and cascade technical requirements, lead cross-functional execution, and serve as a trusted technical escalation point for steering design, validation, supplier, and production issues. Your scope may include steering columns, intermediate shafts, dash seals, electric power-assisted steering racks and gears, tie rods, fasteners, and next-generation mechatronic systems such as steer-by-wire, rear-wheel steering, and advanced ADAS steering technologies.

The successful candidate combines deep steering engineering expertise with strong systems thinking, sound first-principles judgment, and the ability to lead through influence. You will help shape steering technology strategy, raise engineering standards, mentor other engineers, and deliver a confident, connected driving experience on every surface and in every condition.

Reports to: Senior Manager, Chassis — Steering, Wheels & Tires

Responsibilities
  • Spearhead End-to-End Architecture & Development: Lead the technical direction and hardware development for complex steering systems—including advanced Steer-by-Wire (SbW)—making critical architecture decisions that balance safety, performance, NVH, cost, and manufacturability across vehicle programs.
  • Manage the Requirements Lifecycle: Author and translate vehicle-level customer attributes into detailed system and component specifications. Drive cross-functional alignment with Vehicle Dynamics, Controls, Functional Safety, Software, and ADAS, while proactively mitigating downstream design impacts.
  • Drive Clean-Sheet Design & Optimization: Utilize first-principles engineering, CATIA V6 / 3DEXPERIENCE, CAE, and data-driven trade studies to optimize designs, oversee kinematic packaging, and identify opportunities for improved robustness and customer experience.
  • Own Validation Strategy & DFMEA: Approve all DVP&R content, testing strategies, and DFMEA activities. Define robust duty cycles, test methods, and acceptance criteria to ensure comprehensive coverage of system durability, performance, and failure modes.
  • Lead Advanced Problem-Solving: Resolve complex, ambiguous, and systemic steering issues from containment through root cause analysis and prevention. Establish reusable problem-solving methodologies and decisively communicate technical conclusions.
  • Direct Supplier Technical Development: Hold suppliers accountable to strict quality, timing, and engineering deliverables. Partner with Purchasing to review supplier designs and test plans to achieve the optimal total system solution.
  • Represent Steering in Gateway Reviews: Act as the technical authority for Steering Engineering in design reviews, program gateways, build events, and leadership forums, presenting clear recommendations, risks, trade-offs, and recovery plans.
  • Champion Engineering Standards: Create, improve, and enforce steering design rules, validation practices, and development methodologies to elevate engineering rigor across the broader Chassis organization.
  • Mentor and Elevate the Team: Coach less-experienced engineers through design reviews, technical problem-solving, and supplier engagement to raise the overall quality and consistency of steering deliverables.
  • Manage Concurrent Workstreams: Balance multiple vehicle programs and prioritize effectively in a fast-paced environment. Travel as required to support supplier visits, physical testing, prototype builds, and production launches.
Qualifications
  • Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or a related engineering discipline.
  • 7+ years of relevant experience in automotive steering system or hardware development at an OEM, steering supplier, or equivalent engineering organization
  • Demonstrated experience leading steering engineering work across multiple vehicle development programs, including concept, development, validation, launch, and production support.
  • Deep technical knowledge of mechanical steering systems and components, including steering columns, intermediate shafts, seals, EPAS racks/gears, tie rods, joints, fasteners, and steering interfaces.
  • Experience owning or leading system-level and component-level requirements, DFMEA, DVP&R/DVPR, validation planning, design release, engineering change, and sign-off activities.
  • Strong first-principles problem-solving capability, including root-cause analysis, structured corrective action, and data-driven decision making under uncertainty.
  • Experience with CATIA V6 / 3DEXPERIENCE or an equivalent production CAD environment, along with CAE/FEA tools and engineering release systems.
  • Working knowledge of chassis design, vehicle dynamics, steering performance, materials, manufacturing processes, GD&T, design for manufacturing, and joint/fastener engineering.
  • Demonstrated ability to lead cross-functional technical decisions, resolve conflicts, influence without direct authority, and communicate effectively with technical and non-technical stakeholders, suppliers, and leadership.
  • Demonstrated leadership aptitude, including mentoring engineers, reviewing technical work, setting a high bar for engineering rigor, and representing a functional area in cross-functional forums.
  • Experience working in fast-paced, ambiguous environments with compressed timing and multiple concurrent priorities.

Preferred:

  • Experience with steer-by-wire, rear-wheel steering, advanced ADAS steering, steering controls, or other steering mechatronic systems.
  • Familiarity with functional safety standards
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Staff Steering Engineer, Chassis
Staff Steering Engineer, Chassis

Rivian • Irvine (CA)

On-site
USD 138,000 - 183,000
Comprehensive benefits
401(k) Plan
Employee Stock Purchase Program
Staff Steering Engineer — Chassis & Steer-by-Wire
Staff Steering Engineer — Chassis & Steer-by-Wire

Rivian • Irvine (CA)

On-site
USD 138,000 - 183,000
Comprehensive benefits
401(k) Plan
Employee Stock Purchase Program
Lead Steering Systems Engineer: SbW & ADAS Expert
Lead Steering Systems Engineer: SbW & ADAS Expert

Rivian Automotive • Tustin (CA)

On-site
USD 150,000 - 210,000
Senior Engineer
Senior Engineer

The Mice Groups, Inc. • Newark (CA)

On-site
USD 120,000 - 180,000
Sr. Functional Safety Engineer - Steer by Wire
Sr. Functional Safety Engineer - Steer by Wire

Rivian and Volkswagen Group Technologies • Irvine (CA)

On-site
USD 90,000 - 120,000
Flex Time Off
Retirement savings plans
Medical coverage
+2
Senior Automotive Engineer – Steering Wheel / Restraint Systems
Senior Automotive Engineer – Steering Wheel / Restraint Systems

Harvey Nash Group • Southfield (MI)

On-site
USD 110,000 - 150,000
AVD Steering Design Release Engineer
AVD Steering Design Release Engineer

General Motors Company • Warren (MI)

On-site
USD 90,000 - 130,000
Studio Engineer - II
Studio Engineer - II

Rivian Automotive • Tustin (CA)

On-site
USD 120,000 - 180,000
DRE Steering
DRE Steering

Segula Technologies • Auburn (AL)

On-site
USD 110,000 - 150,000
Senior Chassis Design Engineer
Senior Chassis Design Engineer

Ford Motor Company • Long Beach (CA)

Hybrid
USD 135,420 - 226,980
Medical, dental, and vision coverage
Flexible family care days
Tuition assistance
+1