Staff Power Electronics Engineer

Roman Health Pharmacy LLC; Westminster (CO); On-site; USD 158,000 - 189,000; Full time

Benefits offered by this job

Stock options

Health benefits

Retirement plans

Job summary

CesiumAstro is seeking a Staff Power Electronics Engineer to join our SATCOM hardware team. You will lead architecture definition, perform trade studies, and design high-power converters and distribution systems for military and commercial applications.

You will mentor engineers, manage validation campaigns, and drive production releases. The role demands extensive hands-on testing, system integration, and strong communication skills.

Qualifications

• BS degree in Electrical Engineering from an accredited university.
• Experience designing analog and power electronics.
• Experience with power architectures and SWAP-C trade studies.
• Experience designing and testing AC-DC and DC-DC power supplies.
• Knowledge of control theory and stability of power electronics.
• Experience with power filters and EMC considerations.
• Experience with verification plans and production readiness.
• Hands-on testing with lab instruments and measurement tools.
• Strong communication skills

Responsibilities

• Lead development of power system architectures and derive power subsystem requirements.
• Design DC-DC power converters, power supplies, and power distribution systems from a few watts to 20+kW in 0.8–400 V.
• Design single-phase and three-phase AC-DC power supplies and distribution systems from a few kW to 20+kW.
• Perform WCA, stress analysis, small-signal modeling, FMEA, reliability analysis, and power integrity analysis.
• Develop design verification test plans, requirement matrices, system integration and qualification test plans, and production acceptance test plans.
• Lead board bring-up and design verification testing of analog and power electronics circuits.
• Lead system integration, qualification campaigns, and production release of power supply modules and power systems.
• Mentor younger engineers and foster knowledge sharing.
• Lead a small team of power electronics engineers to drive project execution.

Skills

Power electronics

Analog design

Circuit analysis

Power conversion

Control theory

Thermal management

Reliability analysis

Lab testing

Team leadership

Problem solving

Education

Bachelor of Science in Electrical Engineering

Tools

SPICE

LTSpice

SIMetrix

SIMPLIS

MATLAB

ANSYS Q3D

SiWave

HyperLynx

Altium

OrCAD

Allegro

Xpedition

Job description

Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State.

At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team.

We are seeking a Staff Power Electronics Engineer to join our growing satellite communication (SATCOM) terminal development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for military and commercial power systems—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support.

JOB DUTIES AND RESPONSIBILITIES

• Lead the development ofpower system architecturesand derive power subsystemrequirements.
• DesignDC-DCpower converters, power supplies,and power distribution systems ranging from a few watts to more than20 kW of power in the 0.8 V to 400 V range.
• Designsingle-phase andthree-phase AC-DC power supplies and powerdistributionsystemsranging from a few kilowatts to more than20 kW.
• Performcomprehensiveanalysis ofAC-DC and DC-DC power suppliesincluding worst-case circuit analysis(WCA), stress analysis, small signalmodelinganalysis,failure modes and effects analysis(FMEA),reliability analysis,and power integrity analysis.
• Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supplies.
• Leadboardbring-up and design verification testing ofanalog andpower electronics circuits.
• Lead systemintegration,qualification campaigns, andproductionreleaseofpowersupplymodules and power systems.
• Mentor younger engineersand foster knowledge sharing.
• Lead a small team of power electronics engineers to drive project execution.

JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS

• Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university.
• Minimum of 8 years of experience designing analog and power electronics
• Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks
• Experience designing, testing and qualifying single-phase and three-phase off-line AC-DC power supplies, and DC-DC power supplies for industrial, airborne, or military systems
• Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory
• Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC)
• Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans
• Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies
• Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators
• Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx
• Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics
• Experience designing and testing power electronics units to meet industry standards and requirements in the automotive, industrial, aircraft, or military markets (e.g. FCC, CISPR, UL safety standards, ECSS, NASA, MIL standards)
• Excellent written and verbal communication skills

PREFERRED EXPERIENCE

• Experience designing and testing isolated and non-isolated DC-DC power converters (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward)
• Experience designing or specifying custom power magnetics for power supplies and power line filters
• Knowledge of power stage design and control methods for power factor correction (PFC) converters and active rectifiers
• Experience generating statements of work and requirements for external vendors, vendor selection, and vendor management for power supply and power system rack developments
• Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition
• Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx
• Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.)
• Programming skills to support hardware test and data processing (Python, MATLAB, etc.)

$158,000 - $189,000 a year

CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans.

CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard torace, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.