Staff Controls Engineer

Cintrifuse; Cincinnati (OH); Presencial; USD 120.000 - 180.000; Jornada completa

Descripción de la vacante

Cintrifuse is seeking a senior controls engineer to design and implement automated assembly and test equipment, integrating PLC, HMI, SCADA, robotics, and vision systems. You will contribute to the electrical and software architecture for new automation equipment from concept through validation, and you will lead ongoing improvements in equipment performance.

The role requires hands-on experience with Allen-Bradley PLC platforms and HMI/SCADA tools, strong collaboration across functions, and a

Formación

• Must have degree in engineering and extensive controls/automation experience in regulated industries.
• Proven hands-on design, programming, and integration of automated assembly/test equipment.
• Experience with FDA 21 CFR Part 820/11 and ISO standards is preferred.

Responsabilidades

• Design and implement automated control systems including PLC, HMI, SCADA, robotics, and vision.
• Develop electrical/software architecture for new automation equipment from concept to validation.
• Program and troubleshoot Allen-Bradley PLCs, Ignition HMIs, SCADA, and robot controllers.
• Lead continuous improvement to boost OEE, yield, and throughput via controls enhancements.
• Support validation activities (IQ/OQ/PQ) per FDA and ISO requirements and document accordingly.

Conocimientos

Allen-Bradley PLCs

HMI/SCADA

Robotics programming

Motion control

OEE improvement

Cross-functional collaboration

Industrial networking

Troubleshooting and root cause分析

Educación

Bachelor’s degree in Electrical, Mechanical, Controls, Mechatronics, or related Engineering

Herramientas

Ignition

SQL (MS SQL)

SCADA software

SolidWorks

Descripción del empleo

Location: Onsite

Status Type: Full Time

QUALIFICATIONS

Required:

• Bachelor’s degree in Electrical, Mechanical, Controls, Mechatronics, or related Engineering from an accredited university.
• A minimum of 10 years of controls and automation engineering experience supporting automated manufacturing equipment in a regulated industry (medical device, pharmaceutical, or similar); or a master’s degree plus 6 years of experience.
• Proven hands-on experience designing, programming, and integrating highly automated assembly and test equipment, including PLC-based control systems, HMI/SCADA architectures, robotics, and motion control.
• Demonstrated experience collaborating with cross-functional project teams and automation suppliers.
• Experience supporting automated production equipment in a high-volume manufacturing environment (1M+ units annually, cycle time less than 10 seconds).
• Advanced proficiency programming and architecting Allen-Bradley PLC platforms (e.g., CompactLogix, ControlLogix) in ladder logic and/or structured text, HMI development (e.g., Ignition), SCADA systems, and industrial data collection/database architectures (e.g., MS SQL).
• Experience with automated testing, vision inspection, and servo-driven motion platforms.
• Deep understanding of robotic systems (SCARA, Cartesian, and collaborative robots) and industrial networking protocols (EtherNet/IP, OPC-UA).
• Demonstrated ability to improve Overall Equipment Effectiveness (OEE) through controls and automation engineering, including PLC/HMI/SCADA-based downtime and fault data collection, alarm and diagnostic strategies, and cycle-time and motion optimization.

Preferred:

• Proficiency with SolidWorks, Minitab, and Microsoft Office Suite (Project, Word, Excel, PowerPoint, Visio, Outlook).
• Knowledge of Good Automated Manufacturing Practice (GAMP) 5, International Organization for Standardization (ISO) 13485, and Title 21 CFR Part 820 and Part 11 for equipment and software validation.
• Experience with cleanroom manufacturing (International Organization for Standardization (ISO) Class 8) and contamination control strategies.
• Vendor automation or robot certifications, or hands-on programming experience specific to FANUC, ABB, or Epson controllers.
• Experience with capital automation equipment procurement and project management, including supplier evaluation and contract negotiation.
• Six or more years of experience participating in equipment, software, and computer system validation and qualification activities (IQ, OQ, PQ) in compliance with FDA 21 CFR Part 820 and Part 11.

Skills & Competencies:

• Proficient in controls system design and equipment lifecycle management.
• Experienced in software and equipment validation, including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Advanced skills in automated equipment performance optimization, controls and production data analysis, and structured root-cause problem solving.
• Effective communicator with excellent technical writing and presentation skills.
• Strong skills in supplier management and technical coaching.
• Working knowledge of Lean Six Sigma, process capability analysis (Cp, Cpk, Ppk), and Measurement System Analysis (MSA) as applied to automated assembly, test, and inspection equipment.
• Experience facilitating equipment-focused kaizen events, Design of Experiments (DOE) studies, and Statistical Process Control (SPC) monitoring using automated data collection from production equipment.
• Deep understanding of Manufacturing Execution Systems (MES), Enterprise Resource Planning (ERP) systems, SQL-based data collection databases, and automation data connectivity for traceability and performance tracking.
• Adaptability and resilience in dynamic, high-volume manufacturing environments.
• Advanced troubleshooting and optimization of PLC, HMI, and SCADA-based control systems supporting automated production equipment.
• Skilled in robot programming, motion control tuning, and vision system calibration for automated assembly and inspection equipment.
• Ability to navigate ambiguity and influence technical decisions at the department and organizational level.
• Familiarity with project management fundamentals and tools (e.g., Microsoft Project) to plan and execute capital equipment projects.

Physical Requirements:

• Must be able to remain in a stationary position for extended periods of time.
• Ability to constantly operate a computer and other office equipment, such as printer, telephone, etc.
• Ability to work within, crouch, stoop, bend around and potentially underneath equipment for extended periods of time.
• Must be able to access and navigate all areas of the facility, including cleanrooms.
• Position requires being physically present on the premises during regular company hours or as approved by management

RESPONSIBILITIES:

• Design, specify, and implement fully automated assembly and test equipment control systems, including PLC, HMI, SCADA, robotics, motion control, and vision inspection integration.
• Support the development of electrical, controls, and software architecture for new automation equipment, from concept and prototyping through fabrication, programming, and final validation testing.
• Program, configure, and troubleshoot PLCs (Allen-Bradley), HMIs (e.g., Ignition), SCADA systems, and robotic controllers supporting automated production lines.
• Lead troubleshooting and continuous improvement efforts for automated equipment controls to enhance performance, quality, and reliability.
• Support process, software, and computer system validation activities (Installation Qualification (IQ), Operational Qualification (OQ), Performance Qualification (PQ)) and documentation in compliance with Food and Drug Administration (FDA) 21 CFR Part 820 and Part 11, and International Organization for Standardization (ISO) standards.
• Develop and implement Standard Operating Procedures, operator and technician training, and qualification documentation for automated equipment control systems, including software configuration management and change control.
• Lead capital automation equipment procurement, including supplier evaluation, design reviews, and Factory Acceptance Tests (FATs) and Site Acceptance Tests (SATs).
• Drive improvements in Overall Equipment Effectiveness (OEE), yield, and throughput on automated production equipment through controls enhancements - PLC and HMI code optimization, motion tuning, fault diagnostics, and equipment data analysis - supported by Lean Six Sigma tools.
• Provide technical guidance and mentorship to engineers and technicians on controls and automation design practices.
• Develop and maintain Quality System documentation related to automated manufacturing equipment, control systems, and automation software.
• Collaborate with cross-functional teams (product development, manufacturing, quality, and regulatory) to deliver automation and controls engineering project goals on time and within budget.
• Support risk management through Failure Mode and Effects Analysis (FMEA) and other preventive quality tools.