Sr. Quality Engineer

Autoneum Holding AG; Duncan (OK); Hybrid; USD 60,000 - 85,000; Full time

Job summary

Autoneum Holding AG in Duncan, OK, is seeking a Quality Engineer to monitor and improve operational quality, with responsibilities spanning training, audits, PPAP/APQP, in-process testing, non-conformance handling, MSA/calibration, and other duties. The role emphasizes data analysis, root cause investigation, and cross-functional teamwork to meet ISO 9001/IATF certifications.

You will work with managers to implement quality measures, drive continuous improvement, and support supplier and

Qualifications

• Bachelor of Science in engineering or quality with at least 3 years of experience.
• Lead auditor certification is an asset.
• ASQ quality engineer certification is an asset.
• Ability to develop and document inspection methods.
• Experience with Root Cause Analysis and corrective actions.
• Cross-functional teamwork capability.
• Lean and Six Sigma tools familiarity (DMAIC).
• Experience with MSA and statistical analysis.

Responsibilities

• Training, Lean Layer Process Audits, and 5S (10%).
• Audit – 3rd Party and Customers, Document Control (20%).
• Quality Systems/APQP /PPAP (20%).
• In Process Test Methods, Calibrations (20%).
• Non-Conformance (10%).
• MSA, Calibration (15%).
• Other duties as Assigned (5%).

Skills

Root Cause Analysis

Data analysis

Cross-functional teamwork

Analytical skills

Lean Six Sigma

Education

B.S. in Engineering or Quality

Tools

ISO 9001 / IATF audits

PPAP/APQP familiarity

Job description

Autoneum is globally leading in acoustic and thermal management for light and commercial vehicles. The Company develops and produces multifunctional, lightweight and sustainable components and systems for interior floor, interior trim as well as engine bay and underbody. Customers include almost all automobile manufacturers in Europe, North & South America, Asia and Africa. The Company with its head-quarters in Winterthur, Switzerland, is listed on the SIX Swiss Ex-change (ticker symbol AUTN).

Summary

A quality engineer to monitor and improve the quality of our operational processes and outputs. The quality engineer's responsibilities include designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures.

Essential Duties and Primary Responsibilities

A. Training, Lean LPA and 5S 10%

B. Audit – 3rd Party and Customers, Document Control 20%

C. Quality Systems/APQP /PPAP 20%

D. In Process Test Methods, Calibrations 20%

E. Non-Conformance/Corrective Actions 10%

F. Incoming and in Process inspections, Calibration 15%

G. Other Duties as assigned 5%

Responsibilities

A. Training, Lean Layer Process Audits, and 5S (10%):

• Accomplishes quality assurance resource objectives by supporting the training of the quality operations team on the appropriate process of quality inspections.
• Help support department and organization reputation by reducing process waste and improving organization and cleanliness, driving assigned projects to successful completion. exploring opportunities to add value to the organization.

B. Audit – 3rd Party and Customers, Document Control (20%):

• Support external/internal quality audits and third-party surveillance activities.
• Support internal quality audits to drive QMS improvement and maintain ISO 9001/IATF certifications.
• Drive and monitor the required actions based on the audit activity listed above.
• Monitor and maintain active and effective document control systems in support of the QMS and effective/efficient operation.

C. Quality Systems/APQP /PPAP (20%):

• Achieves Key Performance Indicator (KPI) objectives (Scrap, Customer Claims, Cost of Non quality)by helping develop the appropriate production/quality data collection process, collecting data (including nonconformance), and conducting the appropriate analysis to allow for the appropriate continuous improvement strategic plans to be enacted. This includes owning a project or being a part of a team that implements Corrective or Preventative action to ensure the KPIs are met.
• Develop quality control plans (QCP) by identifying critical control points and implementing preventive measures or test methods, understanding machine or material process limits, monitoring production inspection results, and verifying or updating quality procedures.
• Support and or facilitate PPAP process for new launch and or engineering changes.

D. Incoming Material/Production Testing Inspections/COA (20%):

• Conduct incoming and onsite testing and verification process.
• Review and file receipts for Certificate of Analyst
• Conduct inspections to verify that raw materials, equipment, and finished products meet quality specifications. They identify any defects or deviations from standards.
• Responsible for the daily/weekly/annually testing and validation of incoming material/production finished goods.
• Conduct incoming and onsite testing and verification process. Conduct AFR Testing Conduct weekly AFR Measurements and report out results to plant staff Identifies quality data trends to develop and lead corrective & preventive action.

E. Non-Conformance (10%):

• Manages internal aspects of the nonconformance system (NC). Supply reports by collecting, analyzing, and summarizing information and trends including non-conforming assemblies, processes issues, and Supplier (raw material and module) issues. Work with SQE on supplier-related issues. Work on the RMA team to address customer issues. Support root cause and corrective actions and validations.

F. MSA, Calibration (15%):

• Developing incoming documents and completing dimensional inspections of incoming and in-process products using various variable and attribute gauging methods based on QCP and Product Engineer drawings and specifications. Help support the process of going electronic.
• Responsible for ensuring the compliance of the calibration system and requirements.
• Support Engineering teams to support design review and tolerances definition in line with manufacturing equipment and supplier process capabilities.
• Responsible internal/external calibrations ( some internal verifications as needed)
• Facilitating with outside sources for scheduling of calibrations
• Maintain all calibrated equipment and or gages. (ensure all gages and or equipment have legible and up to date calibrations ) This is related to ensuring accurate and up to date records of calibration.
• Responsible for conducting, facilitating, and maintaining MSA reporting ( Gage R&R, Dimensional, Capability Studies) annually, for new launch and or engineering changes utilizing gage pack and Minitab.

G. Other duties as Assigned (5%)

• Any other duties assigned by the Supervisor or designated individual.

The ideal candidate should possess the following skills:

Bachelor of Science in engineering or quality with at least 3 years of experience, or an equivalent combination of education, training, and experience.

• Certification as a lead auditor is considered an asset.
• ASQ certification as a quality engineer is considered an asset.
• Must understand and be able to develop and document inspection methods and practices.
• Experienced in Root Cause Analysis and Corrective Action systems and follow through.
• Able to work within a cross-functional team environment.
• Strong data collection and analysis skills.
• Strong understanding of quality and Process Controls.
• Understanding of Quality Audits (internal and external)
• Working knowledge of Lean and Six Sigma tools – DMAIC problem-solving.
• Experience with MSA
• Experience in statistics, procedure implementation, and quality auditing preferred.
• Experience in procedure implementation and quality auditing preferred.
• Familiarity with formal Quality System (ISO 9001, etc.)
• Ability to work well with a cross functional team.
• Demonstrates and promotes team leadership ability.
• Analytical Skills: Proficiency in analytical methods, quality control practices, statistical analysis, and related theory.

The primary purpose of this job description is to summarize the key/essential duties. Other duties may be assigned.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Are you excited to work in a global and multi-cultural work environment and are you looking for an inspiring and engaging workplace? Then we are looking forward to receiving your application.