Sr Instrument Technician

Takeda; Thousand Oaks (CA); On-site; USD 45,000 - 71,000; Full time

Job summary

Takeda in Thousand Oaks, CA is seeking a senior Instrument Calibration Technician V to support metrology across manufacturing. You will perform calibration, troubleshooting, maintenance, installation, and modification of electrical and pneumatic instrumentation and related equipment.

You will coordinate metrology activities, assist projects, and train other technicians. The role requires strong independent judgment, 5+ years in process instrumentation, and familiarity with GMP/CGMP and ISO/IEC

Qualifications

• Senior, non-supervisory role requiring strong independent judgment.
• 5+ years of experience in process instrumentation and calibration.
• Experience with GMP/CGMP and ISO/IEC 17025 where applicable.

Responsibilities

• Perform advanced calibration, troubleshooting, maintenance, installation, and modification of instrumentation and related equipment.
• Calibrate a broad range of instrumentation including temperature, pressure, conductivity, UV, balances, scales, vacuum, pH, CL2, ORP, timers, RPM, flow, and gas detection systems.
• Demonstrate advanced troubleshooting skills involving electrical and pneumatic instrumentation, control systems, and related equipment.
• Operate, maintain, repair, and troubleshoot calibration test equipment and apply metrology techniques.
• Review and approve calibration reports, verify out-of-tolerance conditions, and initiate corrective actions when necessary.
• Plan and schedule routine and non-routine calibration activities balancing metrology requirements with production schedules.
• Support system specification reviews, P&ID verification, and implementation of department projects and process improvements.
• Support and troubleshoot PLCs, microprocessors, automated control systems, and control system instrumentation.
• Maintain accurate calibration records and documentation per SOPs, GMP/GDP, and ISO/IEC 17025 where applicable.
• Train and provide technical guidance to other technicians and coordinate metrology activities when supervisor is unavailable.

Skills

Advanced calibration

Troubleshooting

Electrical instrumentation

Installation & modification

Process control knowledge

Education

High school diploma

Associate degree in metrology or related field

Tools

PLCs

P&ID

Control systems

Job description

Job Description

About the Role:

As an Instrument Calibration Technician V , you’ll serve as a highly experienced technical resource within Takeda’s Metrology organization, supporting the accuracy, reliability, and performance of instrumentation and measurement systems used throughout our manufacturing operations.

You’ll perform advanced calibration, troubleshooting, maintenance, installation, and modification of electrical and pneumatic instrumentation while partnering with Engineering, Maintenance, Process Control, Manufacturing, and external contractors. You’ll also help coordinate daily metrology activities, support projects and process improvements, and provide technical guidance and training to other technicians.

This is a senior, non-supervisory technical role that requires strong independent judgment, advanced troubleshooting capabilities, and the ability to anticipate technical challenges and coordinate work that can impact broader manufacturing operations.

Shift Details: 1st Shift

• Tuesday-Friday: 6:00 AM – 4:30 PM
• Three 10-hour days + one 7-hour day

How You Will Contribute:

• Perform advanced calibration, troubleshooting, maintenance, installation, and modification of instrumentation and related equipment.
• Calibrate a broad range of instrumentation, including temperature, pressure, conductivity, UV, balances, scales, vacuum, pH, CL2, ORP, timers, RPM, liquid/gas flow, and gas detection systems.
• Demonstrate advanced troubleshooting skills involving electrical and pneumatic instrumentation, control systems, and related technical equipment.
• Operate, maintain, repair, and troubleshoot calibration test equipment while applying appropriate metrology techniques and measurement practices.
• Review and approve calibration reports, verify out-of-tolerance conditions, and initiate corrective actions when necessary to support safe and reliable operations.
• Plan and schedule routine and non-routine calibration activities for assigned areas and instrumentation, balancing metrology requirements with production schedules.
• Support new installations, modifications, and project activities in partnership with Engineering, Maintenance, Process Control, PMO, and external contractors.
• Support system specification reviews, Piping & Instrumentation Diagram (P&ID) verification, and the implementation of department projects and process improvements.
• Support and troubleshoot PLCs, microprocessors, automated control systems, and control system instrumentation, applying knowledge of control logic and process control principles.
• Maintain accurate calibration records, reports, and other required documentation in accordance with SOPs, GMP/GDP requirements, and applicable calibration standards, including ISO/IEC 17025 where applicable.
• Train and provide technical guidance to other technicians, review work for quality and accuracy, and help coordinate resources and daily metrology activities when the supervisor is unavailable. Sr Instrument Technician

What You Bring to Takeda:

• A high school diploma or equivalent is required; a two-year technical associate degree in metrology, instrumentation, electronics, or a related technical discipline is preferred. Sr Instrument Technician
• 5+ years of experience in process instrumentation and calibration is required, with pharmaceutical manufacturing or equivalent regulated-industry experience preferred. Sr Instrument Technician
• Skilled craft training, an apprenticeship certificate, or a comparable combination of technical education and experience is preferred.
• Advanced knowledge of metrology, calibration techniques, measurement systems, and calibration certification requirements is required.
• Strong knowledge of electrical and pneumatic instrumentation, including the ability to read and interpret wiring diagrams, loop drawings, and P&IDs, is required.
• Experience with PLCs, microprocessors, automated control systems, and control system logic is preferred.
• Knowledge of laboratory and pharmaceutical production equipment—including autoclaves, process tanks, incubators, analytical equipment, and CIP/SIP systems—is preferred. Sr Instrument Technician
• Knowledge of cGMP manufacturing, chemical and biological safety practices, and applicable calibration standards is preferred.
• Strong mathematical skills and the ability to work with both metric and U.S. measurement standards are required.
• Strong computer skills, including proficiency with Microsoft Word and Excel, are required.
• The ability to independently troubleshoot complex technical issues, exercise sound judgment, and determine appropriate work methods and tools is required.
• Strong communication, interpersonal, and collaboration skills are required, including the ability to effectively train and provide technical guidance to other technicians. Sr Instrument Technician
• Experience specifying like-for-like or alternative instrumentation to meet manufacturing process requirements is preferred. Sr Instrument Technician

Important Considerations:

At Takeda, our patients rely on us to deliver quality products. As a result, we follow strict requirements in our manufacturing facilities to protect product quality, employee safety, and regulatory compliance. In this role, you may:

• Perform a combination of sedentary work and walking throughout the facility while observing equipment and operating conditions.
• Be required to lift up to 75 pounds and carry up to 50 pounds.
• Work in controlled environments requiring special gowning and protective clothing covering the head, face, hands, feet, and body.
• Work in cold or wet environments, including clean rooms and cool/hot storage areas.
• Occasionally work in confined areas.
• Be required to manage hazardous waste in accordance with company procedures and applicable state, federal, and local regulations, including identifying, handling, generating, accumulating, storing, labeling, and transporting hazardous waste on site.
• Be required to work multiple shifts, including weekends, and work overtime as required. Sr Instrument Technician
• Work independently within established procedures while exercising appropriate judgment and escalating issues when necessary.
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role.

More About Us:

At Takeda, we are transforming patient care through the development of novel specialty pharmaceuticals and best-in-class patient support programs. Takeda is a patient-focused company that inspires and empowers you to grow through life-changing work.

Certified as a Global Top Employer, Takeda offers stimulating careers, encourages innovation, and strives for excellence in everything we do. We foster an inclusive, collaborative workplace in which our teams are united by an unwavering commitment to deliver Better Health and a Brighter Future to people around the world.

#GMSGQ #ZR1 #LI-Onsite

Takeda Compensation and Benefits Summary

We understand compensation is an important factor as you consider the next step in your career. We are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices.

For Location:

USA - CA - Thousand Oaks - Rancho Conejo

U.S. Hourly Wage Range:

$32.64 - $51.30

The estimated hourly wage range reflects an anticipated range for this position. The actual hourly wage offered may depend on a variety of factors, including the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job.The actual hourly wage offered will be in accordance with state or local minimum wage requirements for the job location.

For information about our benefits, please click here.

EEO Statement

Takeda is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law.

Locations

USA - CA - Thousand Oaks - Rancho Conejo

Worker Type

Employee

Worker Sub-Type

Regular

Time Type

Full time

Job Exempt

No