Sr Engineering Designer - Engine Team

General Motors Company; Warren (MI); Hybrid; USD 85,000 - 120,000; Full time

Job summary

General Motors is seeking an Engineering Designer to develop integrated, high-quality engine designs and to translate requirements into robust Siemens NX models. The role emphasizes manufacturability, design-for-assembly, and accurate data release for the Engine space at the Warren Tech Center.

You will work with design leads, manufacturing, and partners to ensure durability, performance, and production readiness while operating in a Hybrid setup with on-site expectations at least three days per

Qualifications

• Two to five years of automotive CAD/design experience.
• Demonstrated Siemens NX parametric modeling and design intent.
• Understanding of load paths, stiffness, joints, reinforcements, and interfaces.
• Ability to maintain traceability from requirements through design reviews and release.

Responsibilities

• Develop robust Siemens NX parametric models for components and subsystems.
• Create virtual vehicle integration solutions aligned with program requirements and interfaces.
• Establish hard points, packaging zones, clearances, and service access points.
• Apply structural design fundamentals: stiffness, strength, fatigue, buckling, and reinforcements.
• Perform NX Analysis and use results to guide design decisions with team support.
• Design for manufacturability and assembly from the start of the design process.
• Plan and track work against design sync points and release milestones.

Skills

Siemens NX

Parametric modeling

NX Analysis

GD&T

DFM/DFMA

Virtual integration

Load-path reasoning

Education

Bachelor’s degree in mechanical engineering

Tools

Siemens NX

NX Analysis

Job description

Sr Engineering Designer - Engine Team### Sr Engineering Designer - Engine TeamApply: Hybrid: Warren, Michigan, United States of America: Full time: Posted Today: JR-202622885**Job Description**This role is categorized as hybrid. The selected candidate will be expected to work on-site at the Warren Tech Center at least three days per week, or as otherwise determined by the hiring leader.* **This role is not eligible for relocation assistance.***At General Motors, our product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed not just to be seen, but to be felt. We’re turning today’s impossible into tomorrow’s standard —from breakthrough hardware and battery systems to intuitive design, intelligent software, and next-generation safety and entertainment features.* *Every day, our products move millions of people as we aim to make driving safer, smarter, and more connected, shaping the future of transportation on a global scale.\"***About the Role**:General Motors is seeking an Engineering Designer to develop integrated, high-quality, manufacturable designs for the Engine space. In this role, you will help translate vehicle, propulsion, structural, manufacturing, and program requirements into robust virtual designs that support performance, safety, durability, serviceability, and production readiness. The role is focused on complete Engine systems. You will own or support Siemens NX math models, design criteria, typical sections, clearance studies, subsystem integration, NX Analysis, material and mass data, design reviews, and on-time math releases.You will work closely with the Design Manager, Design Lead Team, Design Release Engineer, fellow designers, engineering partners, manufacturing, joining, quality, suppliers, plant, program, and service teams to identify risks early, resolve integration issues, and deliver release-quality data through the Global Vehicle Development Process. ## What you will do:* Develop and maintain robust, accurate, and production-oriented Siemens NX parametric models for assigned components and subsystems.* Create virtual vehicle integration solutions aligned with program requirements, design principles, packaging constraints, design criteria, and subsystem interfaces.* Develop and refine NX criteria and typical sections using approved modeling methods and program standards.* Establish and control hard points, packaging zones, clearances, service access, and critical interfaces.* Apply structural design fundamentals, including stiffness, strength, fatigue, buckling, section efficiency, joints, materials, reinforcements, and local load introduction.* Evaluate primary and secondary load paths for durability, crash, support, and propulsion-related conditions.* Identify load introduction points, reactions, joints, discontinuities, weak links, and opportunities for efficient structural improvement.* Perform or support clearance, usage, configuration, and virtual studies across components, subsystems, and the complete vehicle.* Complete NX Analysis for assigned components or subsystems and use results appropriately to guide design decisions with support from Design Lead Team or senior designers as needed.* Apply GD&T, tolerance awareness, variation-management, and stack-up principles to support fit, function, joining, load transfer, and assembly.* Design for manufacturability and assembly from the beginning of the design process, considering process capability, tooling, fixturing, access, sequence, joining, weldability, inspection, repairability, and production variation.* Maintain accurate and traceable material, mass, specification, and related data within the math file.* Translate program and component requirements into clear design criteria, integration checks, verification expectations, and release deliverables.* Plan and execute work against design sync points, review milestones, release timing, and other Global Vehicle Development Process deliverables.* Deliver accurate, complete, and on-time math releases with clean CAD, correct interfaces, complete details, and minimal rework.* Use structured problem solving to resolve non-routine and moderately complex virtual integration issues.* Communicate design intent, load paths, integration risks, timing, decisions, and technical concerns clearly and proactively.* Track actions and issues through integration, analysis, reviews, release, build, validation, and verified closure.* Seek input early, support fellow designers, collaborate across functions, and share lessons learned and effective design practices.* Contribute to continuous improvement of modeling methods, design reviews, checks, templates, workflows, and data quality. ## Required qualifications:* Bachelor’s degree in mechanical engineering, engineering technology, or a related engineering discipline, or equivalent experience.* Two to five years of experience in automotive or mechanical CAD, engineering design, or a related product-development environment.* Demonstrated experience using Siemens NX for parametric modeling, model organization, design intent, references, constraints, and model-quality practices.* Understanding of automotive or mechanical structural design and the ability to reason about load paths, stiffness, strength, joints, reinforcements, materials, and interfaces.* Experience with virtual integration, packaging, clearance studies, configurations, usage validation, or comparable design-integration activities.* Working knowledge of GD&T, tolerance concepts, and variation management.* Working knowledge of design for manufacturability and design for assembly.* Ability to interpret requirements, identify ambiguity or conflict, and maintain traceability from requirements through design, review, analysis, release, and issue closure.* Ability to complete assigned work accurately and on schedule while managing multiple interfaces and program commitments.* Strong technical communication, problem-solving, collaboration, ownership, and follow-through skills.* Willingness and ability to work onsite at the Warren Tech Center at least three days per week—Tuesday, Wednesday, and Thursday—or at another frequency determined by the manager. ## Preferred qualifications:* Experience designing structural sheet-metal components, including stamping, forming, draw direction, flanges, hemming or joining interfaces, local reinforcements, spring back, and process capability.* Knowledge of casting processes, including draft, wall thickness, ribs, fillets, porosity risk, machining, datum strategy, and process limitations.* Experience with Electrical Routings and/or fluid structures.* Advanced Siemens NX experience, including complex surfacing, expressions, templates, checks, reusable modeling practices, or workflow improvement.* Broader NX Analysis experience and the ability to connect analysis results to design changes, performance, and risk.* Experience with joining strategies and the relationship between joint design, load transfer, durability, process capability, and production performance.* Experience with DFMEA, tolerance analysis, durability thinking, design optimization, or failure-mode anticipation.* Experience leading configuration or design changes across load paths, interfaces, tooling, joining, validation, and released data.* Demonstrated ability to influence technical decisions without formal authority through facts, alternatives, and practical recommendations.* Experience coaching or developing less-experienced designers in NX modeling, virtual integration, load-path reasoning, DFM/DFA, or review discipline.* Master’s degree in engineering or a related technical discipline. **GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H-1B, OPT, STEM OPT, CPT, TN, J-1, etc.)**#LI-JN1GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc).This role is categorized as hybrid. This means the selected candidate is expected to report to a specific location at least 3 times a week {or other frequency dictated by their manager}.The selected candidate will be required to travel <25% for this role.This job is not eligible for relocation benefits. Any relocation costs would be the responsibility of the selected candidate.