Southern CA - Taper

Anning-Johnson Company

La Puente (CA)

On-site

USD 26,000 - 65,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Anning-Johnson Company in California is seeking a drywall taper to finish walls, ceilings and trim to tight finish levels. You will apply joint compounds, sand between coats, and work from drawings to ensure precision. Finish coats and skim coating are part of daily tasks with attention to level 5 standards.

Candidates must lift up to 100 pounds, climb ladders, and maintain safe work practices. Wages follow union scales in LA area (entry to journeyman) and in San Diego, with rates provided per

Qualifications

  • Ability to read and interpret drawings and finish level requirements.
  • Knowledge of 5 levels and methods of drywall finishing.
  • Must maintain safety and work within precise finish standards.

Responsibilities

  • Read and interpret drawings.
  • Check surfaces for joints alignment and fastener security.
  • Establish work schedule and flow of work.
  • Organize and verify materials.
  • Clean and repair tools.
  • Mix joint compounds.
  • Apply fill coats and finish coats.
  • Finish corners; perform sanding (wet, dry, vacuum).
  • Skim coat gypsum board or related materials.
  • Spray finish compound.
  • Comply with union wage scales in LA/San Diego areas.

Skills

Reading drawings
Finish level understanding
Safety awareness
Physical stamina

Job description

Tapers are required to finish walls, ceilings and trim using hand tools and mechanical tools that conform to the required levels of finishing standards. While maintaining the necessary production and quality required to complete a project and exceeding the customers’ expectations. Tapers apply drywall tape compound to the seams between drywall panels and to nail and screw indentations on the surface of the panels. Tapers work on new walls and ceiling installs and make repairs to existing walls as well. Tapers install and finish metal, plastic, and aluminum trims.

Apply number of coats of compound per specified level of finish, and sand areas after each coat.

Additional responsibilities include:
  • Reading and interpreting drawings
  • Checking working surfaces - verify panels joints are tight and aligned, fastened to framing members tightly without breaking the paper surface or fracturing the core.
  • Establishing a work schedule and flow of work
  • Organizing and verifying materials
  • Cleaning and repairing tools
  • Mixing Joint compounds
  • Applying fill coats
  • Applying finish coats
  • Finishing inside and outside corners
  • Dry sanding
  • Wet sanding
  • Vacuum sanding
  • Skim coating over gypsum board, concrete, or other related materials
  • Spraying finish compound
  • Know and understand the 5 levels and methods of drywall finishing.

Tapers are typically responsible for the production and quality of the products they install. A Taper will usually report to a foreman or lead man and will be assigned a range of tasks to be completed. Timely production and quality are the main responsibilities of a Taper. In addition, Tapers are responsible for working safely and maintaining a safe work environment. Tapers must work within precise limits and standards of specified finish level. Physically, Tapers must be able to: Climb and maintain balance on scaffolds and ladders; reach for, handle, and manipulate objects and materials; lift and carry objects weighing up to 100 pounds; stoop, kneel, crouch, and crawl, and see well (either naturally or with correction).

NOTE: In the LA area wages range from $20.23 per hour for entry level apprentices to $47.43 per hour for Journeyman. Wages are determined by union scale as determined in the current collective bargaining agreement.

NOTE: In the San Diego area wages range from $19.00 per hour for entry level apprentices to $37.93 per hour for Journeyman. Wages are determined by union scale as determined in the current collective bargaining agreement.

Anning-Johnson Co and Restec Contractors Inc are Equal Employment Opportunity (EEO) employers. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disability status, genetic information, or any other characteristic protected by applicable law.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Southern CA - Taper
Southern CA - Taper

Anning-Johnson Co • California

On-site
USD 27,868 - 65,339
Drywall Finisher & Taper - Walls & Ceilings
Drywall Finisher & Taper - Walls & Ceilings

Anning-Johnson Co • California

On-site
USD 27,868 - 65,339
Northern Ca. - Taper
Northern Ca. - Taper

Anning-Johnson Company • Hayward (CA)

On-site
USD 28,000 - 79,000
Northern Ca. - Taper
Northern Ca. - Taper

Anning-Johnson Co • Hayward (CA)

On-site
USD 27,565 - 78,743
Drywall Taper: Master Seams & Smooth Finishes
Drywall Taper: Master Seams & Smooth Finishes

Anning-Johnson Company • Hayward (CA)

On-site
USD 28,000 - 79,000
Portland - Taper
Portland - Taper

Anning-Johnson Company • Wilsonville (OR)

On-site
USD 28,000 - 50,000
Portland - Taper
Portland - Taper

Anning-Johnson Co • Wilsonville (OR)

On-site
USD 40,000 - 60,000
Chicago-Taper
Chicago-Taper

Anning-Johnson Co • Melrose Park (IL)

On-site
USD 28,000 - 73,000
Drywall Taper — Finish Walls & Ceilings with Precision
Drywall Taper — Finish Walls & Ceilings with Precision

Anning-Johnson Co • Wilsonville (OR)

On-site
USD 40,000 - 60,000
Reno/Sparks - Taper
Reno/Sparks - Taper

Anning-Johnson Company • Sparks (NV)

On-site
USD 42,000 - 64,000