Software Engineer II - Medical Device #9925

Enhanced Compliance Inc.

Santa Clarita (CA)

On-site

USD 110,000 - 150,000

Full time

32 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Enhanced Compliance Inc. in Santa Clarita, CA is seeking an Electrical Engineer II to support quality and compliance activities during the design and development of medical device software (SaMD/SiMD) and related process software used in development, testing, and manufacturing.

You will work on IEC 62304, FDA/ISO 13485 design controls, risk management, usability engineering, cybersecurity, and CSV activities, contributing to validation documents and V&V plans while using Jira and other SDLC

Qualifications

  • 3–5 years of experience in software development, testing, or design controls/assurance within regulated industry.
  • Strong hands-on experience with CSV activities including requirements documentation, test development, execution, and reporting.
  • Working knowledge of IEC 62304, FDA/ISO 13485 Design Controls, GAMP 5, CSV, 21 CFR Part 11, and ISO 13485.
  • Experience producing and maintaining high-quality documentation suitable for audits and regulatory submissions.
  • Ability to collaborate effectively in cross-functional environments.
  • Strong knowledge in statistical analysis
  • Hands on testing experience
  • Ability to read and understand requirements.

Responsibilities

  • Support medical device software teams on IEC 62304 and FDA/ISO 13485 design control deliverables and activities for SaMD/SiMD.
  • Support Risk Management deliverables and activities (Hazard Analysis, Design FMEA, Process FMEA) and RMF maintenance per ISO 14971.
  • Support IEC 62366 Usability Engineering activities and documentation.
  • Support medical device software Cybersecurity activities and documentation.
  • Perform CSV/21 CFR Part 11 and CSA activities for software in development, testing, and manufacturing.
  • Develop and maintain validation documentation and deliverables (URS, FRS, risk assessments, IQ/OQ/PQ, traceability matrices, validation reports).
  • Support V&V plans, test protocols, test automation, and defect investigations.
  • Update documentation to maintain validated states of computer systems and software.
  • Contribute to design and development of medical device software using C/C++, Python, Java, C#.
  • Perform medical device software testing and test automation as necessary.
  • Drive continuous improvement in validation methodologies, templates, and processes to improve QMS efficiency and audit readiness.
  • Use Atlassian/Jira and other SDLC tools to document design controls, validation, traceability, test and defect management, deviation and change control activities.

Skills

C/C++
Python
Java
C#

Education

Bachelor's or Master’s degree in Computer Science, Software Engineering, Electrical Engineering, or related field

Tools

Jira

Job description

  • Location Santa Clarita,Santa Clarita, CA, 91321,United States
  • Employee Type Contractor or FT Employee
  • Required Degree 4 Year Degree
About ECI

ECI’s mission is to be the global leader of professional consulting services for the life sciences industry. Our clients lean on our diverse perspectives and decades of expertise to tackle their toughest challenges, and we take pride in providing them transformative solutions with distinctive, sustainable and long-term value. ECI boasts a proven track record of providing full product life cycle consulting on a variety of challenging and exciting projects. Our collaborative culture, welcoming team and flexible employment & benefit options allow us to maintain strong relationships with the most talented individuals in the life sciences industry.

About the role

The Electrical Engineer II will support quality and compliance activities during the design and development of product (medical device) software (i.e. SaMD, SiMD), and for process software used in the medical device development, testing, and manufacturing (i.e. CSV).

What you'll do
  • Support medical device software teams on IEC 62304 and FDA/ISO 13485 design control deliverables and activities for SaMD (Software as a Medical Device) and SiMD (Software in Medical Device) such as requirements, design, architecture, V&V/test protocols and reports, including the maintenance of DHF (Design History File).
  • Support Risk Management deliverables and activities (i.e. Hazard Analysis, Design FMEA, Process FMEA), and the maintenance of the RMF (Risk Management File) in compliance with ISO 14971.
  • Support IEC 62366 Usability Engineering activities and documentation.
  • Support medical device software Cybersecurity activities and documentation.
  • Perform CSV/21 CFR Part 11 and CSA (Computer Software Assurance) activities for software (including off-the-shelf SDLC tools) used in the development, testing, and manufacturing operations of medical devices.
  • Develop and maintain validation documentation and deliverables including URS, FRS, risk assessments, IQ/OQ/PQ, traceability matrices, and validation reports.
  • Support the creation and execution of verification and validation (V&V) plans, including test protocols, test automation, and defect investigations.
  • Update documentation to maintain validated states of computer systems and software.
  • Contribute to design and development of medical device software using C/C++, Python, Java, C#.
  • Perform medical device software testing and test automation as necessary.
  • Drive continuous improvement in validation methodologies, templates, and processes consistent with industry best practices to improve QMS efficiency and audit readiness.
  • Use Atlassian/Jira and other SDLC tools to document design controls, validation, traceability, test and defect management, deviation and change control activities.
What you will bring
  • 3–5 years of experience in software development, testing, or design controls/assurance roles within the medical device or other regulated industry.
  • Bachelor’s or Master’s degree in Computer Science, Software Engineering, Electrical Engineering, or related field.
  • Strong hands-on experience with CSV activities including requirements documentation, test development, execution, and reporting.
  • Working knowledge of IEC 62304, FDA/ISO 13485 Design Controls, GAMP 5, CSV, 21 CFR Part 11, and ISO 13485.
  • Experience producing and maintaining high-quality documentation suitable for audits and regulatory submissions.
  • Ability to collaborate effectively in cross-functional environments.
  • Strong knowledge in statistical analysis
  • Hands on testing experience
  • Ability to read and understand requirements
Preferred Qualifications
  • Proficiency with C/C++, Python and object-oriented programming in regulated environment.
  • Familiarity with scripting languages (Python, MATLAB, shell scripting, PowerShell) to support test automation and tool qualification.
  • Experience validating development tools, automated test systems, or cloud-based or hybrid systems used in regulated contexts.
  • Experience with software risk hazard analysis and mitigation techniques (e.g., FMEA).
  • Knowledge of secure coding, cybersecurity controls, and data integrity principles.
  • Background in Agile/Scrum within regulated environments and using Atlassian/Jira and other SDLC tools.
ECI is an equal opportunity employer

All qualified applicants will receive consideration for employment at ECI without regard to race; creed; color; religion; national origin; sex; age; disability; sexual orientation; gender identity or expression; genetic predisposition or carrier status; veteran, marital, or citizenship status; or any other status protected by law.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Software Firmware Test (V&V) Engineer - Medical Device #1527
Senior Software Firmware Test (V&V) Engineer - Medical Device #1527

Enhanced Compliance Inc. • Los Angeles (CA)

On-site
USD 120,000 - 180,000
Senior R&D Engineer - Medical Device #1380
Senior R&D Engineer - Medical Device #1380

ECI • Marlborough (MA)

On-site
USD 90,000 - 120,000
Senior R&D Engineer - Medical Device #1378
Senior R&D Engineer - Medical Device #1378

Enhanced Compliance Inc. • Arden Hills (MN)

On-site
USD 90,000 - 130,000
Senior R&D Engineer - Medical Device #1378
Senior R&D Engineer - Medical Device #1378

ECI • Arden Hills (MN)

On-site
USD 110,000 - 160,000
Senior Design Quality Assurance Engineer - Medical Device #0436
Senior Design Quality Assurance Engineer - Medical Device #0436

Enhanced Compliance Inc. • United States

Remote
USD 90,000 - 125,000
Senior R&D Engineer - Medical Device #1380
Senior R&D Engineer - Medical Device #1380

Enhanced Compliance Inc. • Marlborough (MA)

On-site
USD 110,000 - 170,000
Equal opportunity employer
Flexible benefits
Software Engineer II - Medical Device Compliance & CSV
Software Engineer II - Medical Device Compliance & CSV

Enhanced Compliance Inc. • Santa Clarita (CA)

On-site
USD 110,000 - 150,000
Staff Software Quality Engineer
Staff Software Quality Engineer

Real Staffing Group • San Francisco (CA)

On-site
USD 180,000 - 240,000
(Senior / Principal) Software Test Engineer
(Senior / Principal) Software Test Engineer

Real • Minneapolis (MN)

On-site
USD 100,000 - 140,000
Senior Software Quality Engineer
Senior Software Quality Engineer

Real Staffing • Irvine (CA)

On-site
USD 120,000 - 180,000