Service Mechanic C-A

AEP Service Corporation

Abilene (TX)

On-site

USD 28,000 - 36,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

AEP Service Corporation in Abilene, TX is seeking an apprentice-level Service Mechanic A to assist in installation, maintenance, and inspection of electrical transmission and distribution facilities. You will help respond to trouble calls, support construction crews, and learn to operate line equipment safely.

During the first months you’ll work under supervision with voltages up to 260–600 volts, progressing in responsibility as you gain experience.

Qualifications

  • High School graduate or GED.
  • Minimum of one year distribution electrical power line work experience, OR one year of related line experience defined as: successful completion of a one year electrical power line school certificate plus a minimum of 16 weeks internship or distribution electrical power line experience, or an Associate degree from an electrical power line school which includes a minimum of 16 weeks internship or distribution electrical power line experience.
  • Valid Class A Commercial Driver License.
  • Heavy physical demand; must have the ability and desire to acquire the necessary knowledge and skills to perform the duties.

Responsibilities

  • Assist with maintenance and repair of overhead distribution/transmission lines, structures and equipment.
  • Work on conductors and equipment energized up to 260 volts under general supervision.
  • Operate line switches, reclosers and other sectionalizing devices under supervision as skill grows.
  • Assemble, install, maintain, remove and inspect conductors and fixtures on overhead/underground facilities.
  • Load, unload, handle, install, maintain and remove poles, towers and structures.
  • Attend and participate in training as assigned and assist in training other employees.

Skills

Electrical power line work
Safety awareness

Education

High School diploma or GED

Job description

Job Posting End Date

11-20-2026 Please note the job posting will close on the day before the posting end date

Job Summary

This is a single position posted at multiple levels. The description below is based on level C. Additional skills and requirements needed for B&A.

This is an apprentice level position. The duties are to assist in performing service work involved with the installation, rearrangement, maintenance, operation, removal and inspection of electrical transmission and distribution facilities; drive and operate line trucks and associated auxiliary equipment. Assist in responding to trouble calls, investigating, correcting, and clearing trouble, and provide assistance to construction and repair crews, as required. The following list sets forth the principal duties required for the job. All items apply to overhead and underground, as applicable. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below.

Job Description
What You'll Do:
  • Assist with maintenance and repair of overhead distribution/transmission lines, structures and equipment while performing duties in accordance with the Company safety rules, regulations and practices and report unsafe conditions and practices.
  • During the first six months in this classification, shall be capable of working on conductors and equipment energized up to 260 volts under general supervision. Assist with work on conductors and equipment energized at secondary voltages to 600 volts under immediate supervision of higher classification.
  • After six months in this classification, shall be capable of working on conductors and equipment energized up to 600 volts under general supervision.
  • During the SMC classification, under direct supervision, the employee may operate cutouts, line switches, reclosers, and other sectionalizing devices, refuse line and transformer devices, test de-energized lines and equipment, and place or remove grounds. During this time frame, the employee may progress from direct supervision to immediate and finally general supervision as skill level dictates.
  • After 18 months in this classification, for the purpose of on-the-job training, may perform the duties of the first six months of the SMB classification when working under the direct supervision of an employee of higher classification.
  • Assemble, install, maintain, remove and inspect conductors, fixtures and other associated equipment on overhead and underground facilities.
  • Operate mechanized equipment required to install, remove or maintain overhead and underground transmission and distribution facilities.
  • Become familiar with the use and care of live line tools.
  • Become familiar with and use volt-amp meters, ground meggers, continuity testers and other electrical test equipment associated with line work on voltages up to 600 volts.
  • Load, unload, handle, install, maintain and remove poles, towers and structures.
  • Assemble and erect equipment mountings such as regulator and transformer platforms.
  • Apply various kinds of insulating protective equipment on facilities energized only at voltage qualified to work on.
  • Build overhead transformer installations.
  • Identify single and three-phase lines and determine their voltage and conductor size.
  • Become familiar with series and parallel circuits.
  • Gain poles in the air and install single, double and buck arms.
  • Perform inspection, trouble-shooting of lines and report irregularities and abnormal conditions.
  • Familiar and able to maintain tools, equipment and work area in a clean and orderly condition.
  • Maintain records and submit reports as required.
  • Attend and participate in training as assigned and assist in the training of other employees.
  • Perform similar or less skilled work and assist employees of equal or higher classification.
What We're Looking For:
  • Education requirements are listed below: High School graduate or General Equivalency Degree (GED).
  • Work Experience requirement listed below: Minimum of one year distribution electrical power line work experience, OR one year of related line experience defined as: successful completion of a one year electrical power line school certificate plus a minimum of 16 weeks internship or distribution electrical power line experience, or an Associate degree from an electrical power line school which includes a minimum of 16 weeks internship or distribution electrical power line experience.
  • Required License(s)/Certification(s) are listed below: Valid Class A Commercial Driver License.
  • OTHER REQUIREMENTS: Physical demand level is Heavy Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Service Mechanic A, within the time frame determined by the Company, in this family and be qualified through demonstration, examination and/or performance appraisal or vac
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Service Mechanic C-A
Service Mechanic C-A

AEP • Abilene (TX)

On-site
USD 48,000 - 78,000
Transmission Line Mechanic D
Transmission Line Mechanic D

AEP Service Corporation • Roanoke (VA)

On-site
USD 45,000 - 75,000
Line Mechanic-C-A
Line Mechanic-C-A

AEP • Victoria (TX)

On-site
USD 48,000 - 79,000
Transmission Line Mechanic-C-A
Transmission Line Mechanic-C-A

AEP Service Corporation • Roanoke (VA)

On-site
USD 70,000 - 100,000
Transmission Line Mechanic D
Transmission Line Mechanic D

American Electric Power • Roanoke (VA)

On-site
USD 34,000 - 55,000
Competitive compensation
Comprehensive benefits package
Transmission Line Mechanic D
Transmission Line Mechanic D

AEP • Roanoke (VA)

On-site
USD 39,000 - 40,000
Service Mechanic C-A
Service Mechanic C-A

AEP Texas Company, Inc. • Abilene (TX)

On-site
USD 48,000 - 78,000
Line Mechanic-C-A
Line Mechanic-C-A

AEP Service Corporation • Hazard (KY)

On-site
USD 34,000 - 48,000
Competitive compensation
Comprehensive benefits package
Line Mechanic-C
Line Mechanic-C

American Electric Power • Pikeville (KY)

On-site
USD 4,400 - 6,300
Line Mechanic C-A - Cols NE
Line Mechanic C-A - Cols NE

AEP • Columbus (OH)

On-site
USD 43,000 - 81,000
Generous time off
Competitive pay
Educational opportunities