Senior Thermal-Hydraulics Analysis Engineer

Valar Atomics; Los Angeles (CA); On-site; USD 150,000 - 230,000; Full time

Benefits offered by this job

Equity ownership

Unlimited PTO

Free daily meals

PPE stipend

High-impact startup

Career growth

Collaboration access

Ground-up impact

Job summary

Valar Atomics in the United States is seeking a Senior Thermal-Hydraulics Systems Engineer to lead 1-D and network modelling of reactor loops and power-conversion cycles using Flownex SE. You will develop integrated plant models capturing steady-state and transient behavior to guide design decisions.

You’ll size components, analyze transients, set modelling standards, and collaborate with CFD/FEA teams. The role emphasizes mentorship, documentation under NQA-1, and interaction with regulators

Qualifications

• Bachelor's degree or higher in Mechanical, Nuclear, Chemical or Aerospace Engineering with emphasis on thermodynamics, heat transfer or thermal-hydraulics.
• 5+ years of professional thermal-hydraulics / plant-systems analysis experience, including lead responsibility on integrated system or cycle models.
• Master’s degree (MSc/MEng) in Mechanical, Nuclear, Chemical or Aerospace Engineering preferred.
• Flownex SE expertise strongly preferred; otherwise depth in similar codes and willingness to adopt Flownex.
• Experience under nuclear or regulated quality programs (NQA-1, ISO 9001, 10 CFR 50 Appendix B) desirable.
• Scripting/automation of work within defined workflows and QA frameworks.

Responsibilities

• Build, run and maintain integrated Flownex SE network models of primary/secondary loops and power-conversion cycles for steady-state and transient analysis.
• Characterize and size components (pumps, compressors, heat exchangers, valves, turbomachinery) and evaluate cycle performance for Brayton and sCO₂ architectures.
• Analyze plant transients and control response and provide system boundary conditions to CFD/FEA streams.
• Produce calculation packages and system design-basis documentation under NQA-1; support safety analysis and interface with CFD/neutronics models.
• Lead verification and validation of system models, set modelling standards, and mentor junior analysts.
• Mentor engineers and train junior team members.
• Standardize Flownex modelling methods and templates; assist with scoping, estimating and scheduling systems work.

Skills

Mentoring

Leadership

System analysis

Thermal-hydraulics

Education

Bachelor's degree in Mechanical, Nuclear, Chemical or Aerospace Engineering

Master’s degree (MSc/MEng) in related field

Tools

Flownex SE

RELAP5

TRACE

GOTHIC

MELCOR

Modelica/Dymola

Aspen HYSYS Dynamics

GateCycle / Thermoflow

Job description

At Valar Atomics, we're redefining what's possible in energy. Our mission is to make clean, high-temperature nuclear power scalable—unlocking abundant energy for industry, hydrogen, and next-generation manufacturing. We are a team of builders, engineers, and operators who believe nuclear energy should be fast to deploy, factory-made, and built for the real world. Our first pilot plant in Orangeville, Utah will demonstrate how advanced nuclear systems and fuel fabrication can power the future. Joining Valar Atomics means becoming part of a company where autonomy, ownership, and impact exist at every level.

The Team

As part of the Engineering organization, Models & Simulations develops advanced analytical models that support engineering design, performance prediction, and system optimization. The team enables informed decision-making through computational analysis and simulation.

The Role

The Senior Thermal-Hydraulics Systems Engineer leads system-level (1-D / network) thermal-hydraulics modelling of the reactor’s primary and secondary loops, balance of plant and power-conversion cycles using Flownex SE. Within the ModSim Engineering Group, the role builds and validates integrated plant models that capture steady-state performance and transient behavior – start-up and shutdown, load changes, loss-of-flow and trip scenarios – and that inform component sizing, control philosophy and cycle optimization (Brayton and supercritical-CO₂). The engineer defines the systems-modelling approach, reconciles Flownex results with CFD-derived coefficients and supplier data, and translates system analyses into engineering decisions and inputs for the wider design and safety effort.

Key Responsibilities

• Build, run and maintain integrated Flownex SE network models of primary/secondary loops, balance of plant and power-conversion cycles for steady-state and transient analysis.
• Characterize and size components (pumps, compressors, heat exchangers, valves, turbomachinery) and evaluate cycle performance and optimization across Brayton and sCO₂ architectures as required.
• Analyze plant transients and control response (start-up/shutdown, load-follow, loss-of-flow, trips) and provide system boundary conditions to the CFD and FEA streams while consuming their loss/heat-transfer coefficients.
• Produce calculation packages and system design-basis documentation under NQA-1; provide inputs to safety analysis and interface with detailed CFD models and neutronics power distributions.
• Lead verification and validation of system models, set systems-modelling standards, support regulator/customer reviews, and mentor junior systems analysts.
• Mentor engineers and train junior team members
• Standardize Flownex modelling methods, component libraries and templates, and support the Stream Lead in scoping, estimating and scheduling systems work.

Basic Qualifications

• Bachelor's degree or higher in Mechanical, Nuclear, Chemical or Aerospace Engineering with emphasis on thermodynamics, heat transfer or thermal-hydraulics systems.
• 5+ years of professional thermal-hydraulics / plant-systems analysis experience, including lead responsibility on integrated system or cycle models.

Preferred Skills and Experience

• Master’s degree (MSc/MEng) or higher in Mechanical, Nuclear, Chemical or Aerospace Engineering with emphasis on thermodynamics, heat transfer or thermal-hydraulics systems.
• Flownex SE expertise strongly preferred; otherwise demonstrable depth in a comparable systems/transient code (RELAP5, TRACE, GOTHIC, MELCOR, Modelica/Dymola, Aspen HYSYS Dynamics, Thermoflow / GateCycle) with willingness to adopt Flownex.
• Strong applied thermodynamics, heat transfer, and fluid mechanics; closed-loop power-cycle design (Brayton, supercritical-CO₂).
• Heat-exchanger thermal/hydraulic design and rating; turbomachinery and pump performance characterization; control-system representation.
• Transient and dynamic simulation, including reactor thermal-hydraulics and decay-heat / natural-circulation scenarios.
• Property libraries / equations of state (e.g., CoolProp / REFPROP) and helium, molten-salt, sodium, or CO₂ working fluids a strong plus.
• Experience under a nuclear or regulated quality programme (NQA-1, ISO 9001, 10 CFR 50 Appendix B) and exposure to NRC/ASME environments.
• Scripting/automation of work within defined workflows and quality assurance frameworks.
• Track record of mentoring and leading technical systems analysis within a team.

What We Offer

• Equity ownership in a rapidly growing advanced energy company
• Unlimited PTO
• Free daily lunch and dinner provided onsite
• Generous PPE stipend
• High-impact startup environment with significant ownership and autonomy
• Opportunities for rapid career growth and internal advancement
• Direct collaboration with experienced operators, engineers, and industry leaders
• The opportunity to help build and scale transformative energy technology from the ground up

Equal Employment Opportunity Statement

Valar Atomics is an equal opportunity employer. We consider all qualified applicants without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other protected status under applicable law.

We are committed to providing a workplace free of discrimination and harassment and will provide reasonable accommodation as required by law.

Applicants must be legally authorized to work in the United States as a U.S. citizen or lawful permanent resident (green card holder).