Senior Specialist, Manufacturing Engineering (L4) in Chula Vista

Energy Jobline ZR

Chula Vista (CA)

On-site

USD 96,000 - 178,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health insurance
401(k) match
Flexible spending accounts
Education assistance

Job summary

L3Harris Technologies seeks a Senior SMT Manufacturing Engineer in San Diego, CA to lead all manufacturing engineering activities for SMT CCAs used in advanced satellite telemetry and command equipment.

You will guide NPI transfers from Engineering to Production, develop manufacturing processes, tooling, and materials, and train production operators in SMT best practices.

Qualifications

  • 5+ years Automated Surface Mount Technology (SMT) process experience.
  • Bachelor's Degree in Engineering or higher required; experience may substitute to 10 years.

Responsibilities

  • Lead all Manufacturing Engineering activities to support SMT production of CCAs for advanced satellite equipment.
  • Perform DFMs for PCBs and CCAs; establish processes, tooling, and material qualification for NPI.
  • Create work instructions, routings, and labor/cycle time standards; analyze variances.
  • Attend daily huddles and weekly meetings to optimize SMT utilization and drive improvements.
  • Conduct root-cause investigations and implement corrective actions for non-conformances.

Skills

SMT process experience
Process optimization
Root cause analysis
Cross-functional collaboration

Education

Bachelor's degree in Engineering
Graduate degree

Tools

Pick-and-place equipment
PADS/Valor/CircuitCam
CAD: AutoCAD/SolidWorks

Job description

Job Title

Senior SMT Manufacturing Engineer

Job Code

43815

Job Location

San Diego, CA

Job Schedule

9/80

Job Description

Lead all Manufacturing Engineering activities necessary to support SMT production of high reliability circuit card assemblies (CCAs) for advanced satellite telemetry, tracking, and command equipment. Expert knowledge of solder paste stencil printing, automated pick-and-place, convection oven reflow, board cleaning, X-ray examination, and hot-air rework processes.

Willingness to perform hands-on activities including pick-and-place machine programming, reflow profile development, process optimization, and equipment troubleshooting. Collaborate with outside machine vendors and internal Facilities Technicians to assure preventative maintenance, repairs, and upgrades to SMT equipment.

Facilitate new product introduction (NPI) transfer from Engineering to Production. Support day-to-day SMT production issues, root-cause investigations, yield inpromement activities, and continuous improvement initiatives. Conduct SMT equipment/process training for production Operators.

Essential Functions
  • Work closely with other members of cross functional IPTs to oversee development and transfer of new products from Engineering to Production
  • Perform Design for Manufacturability (DFM) assessments for new printed circuit boards (PCBs) and CCAs.
  • Establish manufacturing processes, validate process equipment, develop manufacturing tooling, and qualify materials required for new product introduction (NPI)
  • Create work instructions, assembly routings, and establish associated labor/cycle time standards. Perform economic analyses to identify and address variances in planned labor and cycle times.
  • Attend daily shift huddles and weekly scheduling meetings to facilitate SMT equipment utilization metrics
  • Perform root cause analysis and develop/implement corrective actions to address product non-conformances
Qualifications
  • Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience.
  • 5+ years Automated Surface Mount Technology (SMT) process experience
Additional Skills
  • MyCronic/MyData pick-and-place equipment
  • SMT support software: PADS, Valor, CircuitCam
  • CAD softare: Autocad, Solidworks
  • 3D Printing
  • Lean Six Sigma (LSS) Green or Black Belt
  • Expert knowledge of J-STD-001 and IPC-A-610 requirements for the manufacture of electronic assemblies
  • Excellent leadership and communication skills

In compliance with pay transparency requirements, the salary range for this role in California is $96k - $178k. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to , , , , , ancestry, , (including , childbirth, breastfeeding or other related medical conditions), , expression, , marital status, veteran status, , genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. . In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Specialist, Manufacturing Engineering (L4)
Senior Specialist, Manufacturing Engineering (L4)

L3Harris Technologies, Inc. • San Diego (CA)

On-site
USD 96,000 - 178,000
Health and disability insurance
401(k) match
Flexible spending accounts
+3
Operations Associate 3 - 2nd Shift
Operations Associate 3 - 2nd Shift

L3Harris Technologies, Inc. • Camden (NJ)

On-site
USD 38,000 - 55,000
Health insurance
Disability insurance
401(k) match
+5
Manufacturing Technician B
Manufacturing Technician B

L3Harris Technologies, Inc. • City of Rochester (NY)

On-site
USD 42,000 - 77,000
Health insurance
Disability insurance
401(k) match
+5
Senior Specialist, Manufacturing Engineering
Senior Specialist, Manufacturing Engineering

L3Harris Technologies, Inc. • Palm Bay (FL)

On-site
USD 90,000 - 130,000
Senior Specialist, PCB Designer
Senior Specialist, PCB Designer

L3Harris Technologies • Carlsbad (CA)

On-site
USD 92,000 - 171,000
Sr. Associate Manufacturing Engineering
Sr. Associate Manufacturing Engineering

L3Harris Technologies, Inc. • City of Rochester (NY)

On-site
USD 73,000 - 135,000
Health insurance
401(k) match
Flexible spending accounts
+3
Manufacturing Engineering Intern Salt Lake City UT
Manufacturing Engineering Intern Salt Lake City UT

L3Harris Technologies, Inc. • Salt Lake City (UT)

On-site
USD 30,000 - 56,000
Specialist, Manufacturing Engineering - TS/SCI
Specialist, Manufacturing Engineering - TS/SCI

L3Harris • Palm Bay (FL)

On-site
USD 90,000 - 120,000
Specialist, Manufacturing Engineering - TS/SCI
Specialist, Manufacturing Engineering - TS/SCI

L3Harris Technologies, Inc. • Palm Bay (FL)

On-site
USD 90,000 - 120,000
Senior Specialist, Design
Senior Specialist, Design

L3Harris Technologies, Inc. • Alpharetta (GA)

On-site
USD 110,000 - 140,000