Senior RF Design Engineer

Silvus Technologies; Los Angeles (CA); On-site; USD 140,000 - 190,000; Full time

Benefits offered by this job

Note - No explicit perks listed

Job summary

Silvus Technologies in Los Angeles is seeking a Senior RF Design Engineer to lead the RF subsystem development for the StreamCaster MANET product line. This fully onsite role reports to the RF Engineering Director and requires hands-on design, layout supervision, and rigorous EMI validation in a challenging, defense-grade environment.

The position focuses on RF subsystem design, characterization, and manufacturability across PCB and RFIC implementations, ensuring compliance with emissions and

Qualifications

• Minimum 5 years of multi-GHz RF hardware development experience.
• Good working knowledge of RF board layout, fabrication, and packaging.
• Hands-on experience with solving EMI, harmonics, spurious, and stability issues.

Responsibilities

• Antenna to baseband RF subsystem design using discrete circuitry or highly integrated RFICs.
• Implementing or supervising schematic capture and PCB layout.
• RF performance characterization, tuning, and troubleshooting.
• Overall system design to ensure good EMI performance.
• Ensure circuit board design and overall radio product can pass emission and immunity regulations.
• Troubleshoot RF-related production yield problems.
• Improve design for manufacturability.
• Perform other related duties of which the above are representative.

Education

Bachelor of Science in Electrical Engineering

Tools

AWR Microwave Office

Altium

Job description

Silvus Technologies, a leading provider of advanced MANET and MIMO communications systems, is reshaping mesh network technology for mission-critical applications - on the ground, in the air and at sea. Its battle-proven StreamCaster family of MANET radios and proprietary MN-MIMO waveform provides the vital communications link for defense, law enforcement and public safety agencies around the world, and in the toughest operational environments.

Silvus Technologies is a wholly owned subsidiary of Motorola Solutions, Inc.

Would you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of "Keeping Our Heroes Connected"?

THE OPPORTUNITY

Senior RF Design Engineer reporting to the Director of RF Engineering on the RF Engineering team. The successful individual in this role will actively participate in all aspects of the design process to develop the RF subsystem for Silvus’ StreamCaster MANET product line.

This position is fully onsite, Monday through Friday, at Silvus Technologies’ HQ in the heart of vibrant West Los Angeles.

ROLE AND RESPONSIBILITIES

• Antenna to baseband RF subsystem design using discrete circuitry or highly integrated RFICs.
• Implementing or supervising schematic capture and PCB layout.
• RF performance characterization, tuning, and troubleshooting.
• Overall system design to ensure good EMI performance.
• Ensure circuit board design and overall radio product can pass emission and immunity regulations.
• Troubleshoot RF-related production yield problems.
• Improve design for manufacturability.
• Perform other related duties of which the above are representative.

Travel Requirement

Rare local travel, as required by Silvus (i.e. Irvine, West LA).

REQUIRED QUALIFICATIONS

• Bachelors of Science (or higher) in Electrical Engineering.
• Minimum 5 years of multi-GHz RF hardware development experience.
• Good working knowledge of RF board layout, fabrication, and packaging.
• Hands-on experience with solving EMI, harmonics, spurious, and stability issues.
• Experience using RF simulation tools (i.e. AWR Microwave Office, Altium).

Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.

All employment is contingent upon the successful clearance of a background check and drug test.

PREFERRED KNOWLEDGE, SKILLS, AND ABILITIES

• Master of Science in Electrical Engineering.
• Proactive approach to problem-solving.
• Detail-oriented and a firm commitment to quality.
• Ability to work in a collaborative, multidisciplinary team environment.
• Problem-solving, data analysis, deductive reasoning, and critical thinking skills.

WORKING CONDITIONS AND PHYSICAL REQUIREMENTS

Indoor air-conditioned facility.

Occasional exposure to heat, cold, and allergens while performing tests or demonstrations in the field.

While performing the duties of this job, the employee is required to do the following:

• Lift equipment up to 20 lbs. for the set-up of demonstrations and testing.
• Perform bending and reaching movements to place items on lower and higher shelves.
• Kneeling or squatting to access lower shelves.
• Walking/Moving in the labs.

COMPENSATION

The pay range is NOT a guarantee. It is based on market research and peer data, and will vary depending on the candidate’s experience and qualifications.

CA Pay Range

$140,000 - $190,000 USD

Consistent with Motorola Solutions values and applicable law, we provide the following information to promote pay transparency and equity. Pay within this range varies and depends on job-related knowledge, skills, and experience. The actual offer will be based on the individual candidate.

NOTE - As a US Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements (needed for some Engineering or R&D roles) will be included in the Required Qualifications section of the posted position. This does NOT apply to international positions; only job postings for positions located in the US.

Motorola Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other legally-protected characteristic.

We’re committed to providing an inclusive and accessible recruiting experience for candidates with disabilities, or other physical or mental health conditions.

We are proud of our people-first and community-focused culture, empowering every Motorolan to be their most authentic self and to do their best work to deliver on the promise of a safer world. If you'd like to join our team but feel that you don't quite meet all of the preferred skills, we'd still love to hear why you think you'd be a great addition to our team.

Voluntary Self‑Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Silvus Technologies’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service‑connected disability.

A "recently separated veteran" means any veteran during the three‑year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.