Senior Power & Analog Design Engineer

RTX; McKinney (TX); On-site; USD 87,000 - 165,000; Full time

Job summary

RTX in McKinney, TX, is seeking a Senior Power & Analog Design Engineer for an onsite role. You will design power conversion circuits, analyze and test, simulate, and coordinate with ECAD teams to support missiles/electronics products throughout the lifecycle.

The role requires 5+ years in analog power electronics, proficiency with MATLAB/SIMPLIS/SABER, and experience leading small teams and documenting designs for DoD programs.

Qualifications

• Typically requires a STEM degree and 5+ years of relevant experience.
• Experience with non-isolated converter topologies (buck/boost/buck-boost).
• Analog electronics design experience (FETs/JFETs, op-amps, filters, clock termination).
• Proficiency with MATLAB or similar tools and circuit CAD packages.

Responsibilities

• Define circuit-card level architecture and lead design, analysis, and tests.
• Collaborate with ECAD drafters on layout and routing.
• Plan and execute integration and verification in engineering labs.
• Provide product test support and root-cause investigations.
• Define schedules and lead small teams to meet budgets.

Skills

Power electronics

Analog design

Circuit simulation

ECAD tools

Lab equipment

Leadership

Project management

Proposal development

MATLAB

Education

Bachelor's degree in STEM

Advanced degree in Electrical Engineering

Tools

MATLAB

SIMPLIS

SABER

Siemens Xpedition

xDX Designer

xPCB Layout

HyperLynx

Job description

Date Posted:

2026-09-21

Country:

United States of America

Location:

US-TX-MCKINNEY-513WH ~ 2501 W University Dr ~ WING H BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Multi-Product Power & Digital (MPD) department designs FPGAs, circuit cards, and electronics subassemblies for a range of products including missiles/effectors, radars, and electronic warfare systems. The team leverages digital, analog, and power design skills to provide support throughout the product lifecycle from architecture and design through production and sustainment.

The MPD department is seeking a Senior Power & Analog Design Engineer to join our team. This position is an onsite role.

We are looking for candidates who are eager to collaborate, innovate, and work alongside our talented engineering teams. In this role, you will leverage advanced technologies to create cutting-edge solutions for sensor and effector products. You will partner with experienced, multidisciplinary teams to define requirements, develop architectures, execute detailed design and simulations, and perform integration and verification tasks. You will document your designs within the appropriate configuration management tools and provide comprehensive engineering support throughout the product lifecycle.

This position is an onsite role, located in McKinney, TX

What you will do

As a Senior Power & Analog Design Engineer, your responsibilities will include the following:

• Assist with requirements decomposition and trade studies.
• Define architecture at the circuit card level.
• Lead the design, analysis, test, and documentation of analog and power conversion circuit cards.
• Partner with ECAD drafters through stackup definition, layout, and routing activities.
• Plan and execute integration and verification activities in engineering laboratories.
• Provide product test and troubleshooting support. Support root cause failure investigations.
• Define schedules for circuit card level tasking and drive execution to the planned budget and schedule.
• Lead individual designs and/or small teams.
• Operate with minimal oversight from manager.
• Support internal and external technical reviews.
• Engage in knowledge transfer activities and mentorship of junior engineers.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience
• Design, analysis, test, and/or simulation experience with one or more of the following non-isolated converter topologies: buck, boost, buck-boost.
• Design, analysis, test, and/or simulation experience analog electronics design, including at least one of the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits.
• Experience using tools such as MATLAB, MathCAD, Mathematica, or other similar tools.
• Experience with a schematic capture/circuit board layout CAD package.

Qualifications We Value

• One or more advanced degrees in Electrical Engineering or a related Science, Technology, Engineering, or Mathematics (STEM) major. A suitable degree may be counted as 2 years of work experience.
• Robust design and analysis experience with analog or digital power converter design, to include topologies such as flyback, half-bridge, full-bridge, forward, and push-pull.
• Familiarity with transformer and inductor design considerations in power electronics circuits.
• Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades.
• Experience with development of power converter specifications.
• Design considerations for voltages > 400V and/or power > 10kW.
• Three-phase power systems, power factor control, and inverter/rectifier development.
• Military specifications.
• Circuit simulator SIMPLIS and/or system simulator SABER.
• Siemens Xpedition: xDX Designer, xPCB Layout, and/or Hyperlynx.
• Experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.
• Experience communicating and documenting technical topics.
• Experience with lab equipment such as power supplies, electronic loads, multimeters, signal sources, oscilloscopes and spectrum analyzers
• Demonstrated ability to lead teams to achieve schedule, budget and technical commitments.
• Experience with project management tools such as Earned Value and/or Agile Execution.
• Proposal development experience.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm

Locations

• North Texas: https://careers.rtx.com/global/en/raytheon-north-texas-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attendselect steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms