Senior Network Engineer - Routing & Switching

Global-Enterprise-Services,-LL; Fort Meade (MD); Hybrid; USD 115,000 - 130,000; Full time

Job summary

Global Enterprise Services (GES) is seeking a Senior Network Engineer focused on routing and switching to engineer, implement, and sustain large-scale enterprise networks. You will design, implement, and troubleshoot core, distribution, access, and WAN edge infrastructure.

Responsibilities include routing policy design, VRF/MPLS, QoS, and high-availability, with hands-on ownership. Expect in-office work at DISA HQ, Fort Meade, MD, with potential remote days after acclimation.

Qualifications

• Significant hands-on experience engineering, implementing, and troubleshooting enterprise routing and switching infrastructure at scale.
• Strong knowledge of TCP/IP, subnetting, VLANs, spanning tree, VRFs, multicast, QoS, NAT, and high-availability design.
• Experience documenting network designs and procedures; ability to read routing tables and captures under time pressure.
• Current IAT Level II or higher certification (e.g., Security+ CE).

Responsibilities

• Engineer, configure, and implement enterprise routing and switching infrastructure across core, distribution, access, and WAN edge.
• Design routing policies with BGP, OSPF, EIGRP, and static routes; manage redistribution, filtering, and convergence.
• Develop network diagrams and implement VLANs, VRFs, multicast, QoS, and high-availability designs.
• Create implementation plans, test procedures, and rollback steps; support change windows.

Skills

Senior engineer

Networking

Routing & Switching

BGP OSPF EIGRP

TCP/IP

Education

Bachelor's degree

Master's degree

Tools

Cisco

Aruba

Brocade

Jira

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Senior Network Engineer - Routing & Switching

Full Time DISA Headquarters - DC, Fort Meade, MD, US

4 days ago Requisition ID: 1391

Salary Range: $115,000.00 To $130,000.00 Annually

GES is seeking a Senior Network Engineer specializing in routing and switching to engineer, implement, and sustain enterprise network infrastructure across a large, distributed environment. The role carries hands‑on responsibility for the routed and switched core — designing changes, implementing them cleanly, and resolving the complex problems that reach the senior engineering tier.

This position supports overall network engineering across a broad range of efforts, including planning, designing, and evaluating components of the network. Duties include developing specifications for routing and switching designs, evaluating and recommending technologies to enhance current capabilities, performing needs assessments, and performing installation, modification, testing, and servicing of network equipment.

The successful candidate operates independently on complex engineering work, translates requirements into implementable designs, and serves as an escalation point for routing, switching, and transport issues that others cannot resolve.

Days Required in Office

Five Days in Office Until Acclimated and then possibly One Day Remote

Clearance Required

Secret

Scope and Impact:

Impact: Contributes to the completion of significant project milestones and recommends technical solutions and improvements that affect program results. Work is performed under general direction, with latitude for independent judgment on technical approach.

Complexity: Resolves complex technical problems requiring in-depth analysis, evaluation of multiple factors, and application of established engineering principles and best practices.

Communication: Communicates technical information, design recommendations, risks, and status to engineering leadership, peer teams, and stakeholders. Explains complex technical concepts clearly to both technical and non-technical audiences.

Knowledge: Strong working knowledge of routing and switching principles, theories, and concepts, with demonstrated depth across enterprise network technologies.

Primary Responsibilities

Routing and Switching Engineering

• Engineer, configure, and implement enterprise routing and switching infrastructure, including core, distribution, access, and WAN edge layers.
• Design and implement routing policy using BGP, OSPF, EIGRP, and static routing, including route redistribution, filtering, summarization, path selection, and convergence tuning.
• Engineer Layer 2 infrastructure, including VLAN architecture, spanning-tree design, link aggregation, trunking, and loop prevention.
• Implement and maintain VRFs, MPLS/VPN services, tunneling, multicast, QoS policy, and high-availability designs such as HSRP/VRRP and redundant uplink topologies.
• Develop specifications for network architecture, evaluate and recommend new technologies to enhance current capabilities, and perform needs assessments.
• Perform installation, modification, configuration, testing, and servicing of network equipment, including hardware refresh and software/firmware lifecycle upgrades.
• Baseline and optimize network performance — latency, throughput, utilization, convergence, and error rates — and remediate identified deficiencies.

Implementation and Operations Support

• Develop implementation plans, test and validation steps, rollback procedures, and change documentation for network changes, and execute them during approved change windows.
• Provide senior-level troubleshooting and escalation support for complex routing, switching, transport, and connectivity issues spanning multiple layers and vendors.
• Perform packet-level and protocol-level analysis to isolate faults across the network, systems, and application boundary.
• Support capacity planning, configuration standardization, and compliance of device configurations against approved baselines and hardening requirements.
• Partner with architecture, cybersecurity, operations, and project teams to resolve blockers, manage dependencies, and deliver network changes end-to-end.

Documentation

Develop and maintain engineering and operational documentation, including:

• Logical and physical network diagrams
• Routing designs, policy standards, and addressing plans
• Device configuration standards and baselines
• Implementation, test, and rollback plans
• Port, protocol, and services requirements
• Troubleshooting guides and standard operating procedures
• As-built and operational handoff documentation

Key Success Factors:

• This role is for an engineer who is genuinely hands‑on. The expectation is not oversight of someone else's configuration work but direct ownership of the design, the change, the validation, and the outcome.
• The successful engineer is the person others upscale to — comfortable reading a routing table and a packet capture under time pressure, and equally comfortable writing the implementation plan that keeps the change from becoming an incident.

Required Qualifications

• Bachelor's degree and 8+ years of prior relevant experience, or Master's degree with 6+ years of experience. Specific experience, education, and training may be considered in lieu of a degree.
• Significant hands‑on experience engineering, implementing, and troubleshooting enterprise routing and switching infrastructure at scale.
• Strong working knowledge of TCP/IP, subnetting, BGP, OSPF, EIGRP, VLANs, spanning tree, link aggregation, VRFs, multicast, QoS, NAT, and high‑availability design.
• Experience with network hardware installation, configuration, software upgrades, and lifecycle replacement.
• Experience developing implementation plans, test procedures, and rollback plans, and executing changes in production environments during maintenance windows.
• Demonstrated troubleshooting ability, including packet capture and protocol analysis, across multi‑vendor environments.
• Hands‑on experience with one or more of the following: Cisco, Aruba, Palo Alto, Dell, Infoblox, and Brocade.
• Experience documenting network designs and procedures using tools such as Visio, PowerPoint, or similar.
• Strong written and verbal communication skills.
• Current IAT Level II or higher certification, such as Security+ CE.

Desired Qualifications

• Cisco Certified Network Professional (CCNP) Enterprise or equivalent certification.
• Experience with enterprise network modernization, migration, or large‑scale transformation and integration efforts.
• Experience with software‑defined networking, SD‑WAN, or SD‑Access (Cisco Catalyst Center / DNA Center) environments.
• Experience with network segmentation, access control, and identity‑based networking.
• Experience integrating enterprise networking with cloud infrastructure, including hybrid connectivity and secure cloud routing.
• Experience with network automation and scripting using Python, Ansible, or infrastructure‑as‑code approaches.
• Experience applying DISA STIGs, vulnerability remediation, and configuration hardening to network devices.
• Experience with Jira, Confluence, or similar project and knowledge‑management tools.