Senior Mechanical Engineer

Stealth

San Diego (CA)

On-site

USD 120,000 - 180,000

Full time

4 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Stealth in San Diego, CA, is seeking a Senior Mechanical Engineer to own the enclosure design for two battery-powered wireless devices. You will drive mechanical integration, DFM, and production transfer from EVT through CM handoff, ensuring robust environmental and thermal performance.

Responsibilities include GD&T, RF-aware packaging, and collaboration with ECAD–MCAD teams to meet cost and reliability goals for high-volume production. This is a hands-on, ownership-heavy role with high impact.

Qualifications

  • BS in Mechanical Engineering or equivalent required.
  • 8+ years of electronics product mechanical design experience.
  • Experience taking a product from concept through PVT to mass production at a CM.
  • Expert in plastic part design for injection molding and DFM with tool makers.
  • Fluent GD&T (ASME Y14.5) and tolerance analysis.

Responsibilities

  • Own enclosure design for compact wireless devices and battery packaging.
  • Lead injection-molded part development and multi-cavity tooling.
  • Apply GD&T and stack-up tolerances at antenna, battery, and PCBA interfaces.
  • Ensure RF-aware enclosure design and shielding considerations.
  • Oversee thermal, environmental, and reliability testing plans from EVT to PVT.
  • Coordinate ECAD–MCAD interfaces with Altium and CAD data management.

Skills

Mechanical design
GD&T
SolidWorks
Product development

Education

BS in Mechanical Engineering

Tools

Altium

Job description

San Diego, CA (Onsite) · Full-Time · Mid to Senior

About Us:

We are a stealth-mode deep-tech startup dedicated to connecting the world’s assets so they can be actively tracked, managed, and protected. We are building a device similar to an industrial-strength AirTag that communicates directly with satellites, peers, and ground infrastructure. To do this, we’ve invested heavily in our own custom silicon and waveform. By vertically integrating from custom silicon and novel waveforms up through the application layer, we have built a direct-to-satellite IoT network that communicates at a fraction of current costs and power envelopes, and with receiver sensitivity and battery life that existing architectures cannot match.

Our custom ASIC is returning from fabrication. Our commercial protocol stack spans a novel MAC and PHY architecture, multi-hop mesh routing, and location tracking. The tech is proven, the TAM is gargantuan, and the founders have signed LOIs and conditional orders worth several billion dollars in ARR across applications ranging from supply chain logistics to laptop and cattle tracking.

Our Team and Values:

Joining our team means stepping into a small, high-caliber team united by a clear mission. We operate on two core values: high trust and high performance. We believe that small, focused groups of engineers, unburdened by the bureaucracy of large tech companies, can create transformative technology at a breakneck pace. On our team, you'll have real ownership, support when you hit hard problems, and a meaningful role in building something genuinely new at the silicon and protocol layer.

Location: Onsite in San Diego (with occasional WFH flexibility)

Employment: Full-time

The Role:

We are seeking a Senior Mechanical Engineer as the first in-house mechanical owner for two products: our battery-powered asset tracker, and a tower-mounted outdoor access point. This role will be accountable for our tracker’s enclosure, mechanical integration, and design for manufacturing (DFM) from engineering validation test (EVT) through production validation test (PVT) and contract manufacturer (CM) handoff.

What You’ll Do:
  • Enclosure design: 3D CAD and drawings for a family of compact wireless devices: housings, battery retention, printed circuit board assembly (PCBA) mounting, seals, labels.
  • Injection-molded parts for very high volume: draft, wall uniformity, gating, multi-cavity tooling.
  • Geometric dimensioning and tolerancing (GD&T) and tolerance stack-ups at the antenna, battery, and PCBA interfaces.
  • RF-aware integration: with RF, hold antenna keep-outs and plastic thickness and material over the antennas; RF shield can design.
  • Battery packaging: pouch cell swell, retention and safety; transport certification support (UN 38.3).
  • Outdoor/tower products: review an outside design house’s mechanical design, then own the enclosure from CM transfer: sealing, venting, mounting, solar load, corrosion.
  • Thermal: first-order analysis and test for outdoor products.
  • Mechanical validation: drop, shock, vibration, ingress and temperature test plans and reports for EVT, DVT and PVT.
  • PCBA test fixtures: with the Test & Automation Engineer, design pogo-pin fixtures for functional test and programming, and RF-shielded fixtures: probe alignment, board support to protect ball grid array (BGA) joints, pin wear, and copies for each CM line. Feed test-pad rules back into the PCB layout.
  • Tooling and suppliers: DFM reviews, tool kickoff, first article inspection (FAI), T0/T1 approval, tool changes via engineering change orders (ECOs).
  • Cost: mechanical bill of materials (BOM) and tooling non-recurring engineering (NRE) inputs to the cost model.
  • Electrical–mechanical CAD (ECAD–MCAD): board outlines, keep-outs and component heights with the Altium PCB design.
  • Build up the function: CAD and product data management (PDM) conventions, drawing standards, part numbering, prototyping (3D printing).
Required Qualifications:
  • Bachelor of Science (BS) in Mechanical Engineering (or equivalent); 8+ years in electronics product mechanical design.
  • At least one product taken from concept through PVT into mass production at a CM, at volumes of 100k+ units/year.
  • Expert in plastic part design for injection molding, including working directly with tool makers on DFM, tool trials and FAI.
  • Fluent GD&T (ASME Y14.5) and worst-case / root-sum-square (RSS) tolerance analysis.
  • Expert in SolidWorks and production drawing release.
  • IP67 enclosure sealing design and validation, hands-on with at least one method (e.g., gaskets, ultrasonic or laser welding, adhesives).
  • Planned and ran environmental and mechanical reliability testing: drop, shock, vibration (IEC 60068-2 or equivalent), temperature cycling.
  • Comfortable as the sole ME: self-directed, documents decisions, holds external design houses and suppliers to spec.
Nice-to-Haves:
  • Very high volume: 1M+ units/year: multi-cavity tooling, cycle time, resin cost, overseas molders and CMs.
  • Battery-powered compact devices: pouch or coin cell packaging, swell, lithium transport and safety.
  • Plastic welding: ultrasonic or laser weld joint design.
  • Test fixture design: PCBA fixtures (pogo-pin, pneumatic or vacuum, RF shield boxes) with fixture vendors and CM test engineering.
  • Compact wireless products: trackers, wearables or IoT: dense packaging of PCBA, shields, battery and antenna in a small sealed housing.
  • Antenna-aware enclosure design: how plastic, fasteners and battery placement affect antenna performance.
  • Outdoor / telecom infrastructure: tower mounting, wind load, UV, corrosion, venting (GR-487, ETSI EN 300 019).
  • Simulation: thermal (FloTHERM, Icepak or SolidWorks Flow) and structural finite element analysis (FEA) for drop and mounting.
  • ECAD–MCAD with Altium: MCAD CoDesigner or IDF/STEP.
  • Design house supervision: on time-and-materials contracts.
  • Industrial design (ID): a plus; must be able to work from an industrial designer’s surfaces.
Why You’ll Love Working Here:
  • Foundational moment: the chip is coming back from fabrication now — people who join at this stage define what the company becomes
  • High ownership and autonomy
  • Life-transforming equity ownership, competitive salary, comprehensive health benefits
  • High growth potential as we scale
  • From lab to field: you'll see your work in real deployments — warehouses, aircraft, agricultural operations

If you enjoy owning complex technical challenges end-to-end and want to help build industry-leading communication technology, we’d be excited to talk.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Wireless Systems Architect
Wireless Systems Architect

Stealth Startup • San Diego (CA)

On-site
USD 140,000 - 190,000
Firmware/Embedded Software Engineer
Firmware/Embedded Software Engineer

Stealth Startup • San Diego (CA)

Hybrid
USD 120,000 - 190,000
Stock options / equity
Flexible hours
Distributed Systems Cloud Engineer
Distributed Systems Cloud Engineer

Stealth • San Diego (CA)

On-site
USD 140,000 - 190,000
Equity
Competitive salary
Health benefits
Senior Mechanical Engineer
Senior Mechanical Engineer

American Innovations Ltd • Texas

On-site
USD 120,000 - 160,000
Medical/dental/vision insurance
Life and disability insurance
Paid family leave
+2
Staff Mechanical Engineer, Communications Hardware (Remote Eligible | Relocation Assistance Available)
Staff Mechanical Engineer, Communications Hardware (Remote Eligible | Relocation Assistance Available)

axon • United States

Hybrid
USD 150,000 - 210,000
Simulation Engineer — IoT Modeling and Simulation
Simulation Engineer — IoT Modeling and Simulation

Stealth • San Diego (CA)

On-site
USD 120,000 - 180,000
Onsite in San Diego (occasional WFH)
Competitive salary and equity
Senior Mechanical Engineer
Senior Mechanical Engineer

American Innovations • Austin (TX)

On-site
USD 120,000 - 180,000
Medical/Dental/Vision Insurance
Life and Disability Insurance
Paid Family Leave
+1
Director of Hardware and Firmware Engineering
Director of Hardware and Firmware Engineering

American Innovations Ltd • Austin (TX)

On-site
USD 180,000 - 240,000
Medical/Dental/Vision
401k matching
Paid family leave
+1
Cloud Observability Engineer
Cloud Observability Engineer

Stealth • San Diego (CA)

On-site
USD 140,000 - 190,000
Equity
Health benefits
High ownership & autonomy
Senior Mechanical Engineer
Senior Mechanical Engineer

American Innovations, Ltd. • Austin (TX)

On-site
USD 110,000 - 160,000
Medical/Dental/Vision Insurance
Life and Disability Insurance
Paid Family Leave
+3