Senior Manufacturing Engineer, Turbomachinery Balancing

Mach Industries

Huntington Beach (CA)

On-site

USD 140,000 - 180,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Equity option(s)
Healthcare plan
Paid time off

Job summary

Mach Industries in Huntington Beach, CA is seeking a Senior Manufacturing Engineer, Turbomachinery Balancing to establish, qualify, and scale balancing processes for turbomachinery hardware, including turbine wheels, impellers and blisks, shafts, and complete rotating assemblies.

You will own the balancing process, select and commission equipment, develop tooling, ensure measurement validation, and implement production-ready balancing capabilities in collaboration with Design Engineering, CNC

Qualifications

  • 5+ years of turbomachinery balancing experience or ownership of rotor-balancing processes.
  • Direct experience setting up and commissioning balancing stations with calibration and process validation.
  • Hands-on balancing of turbomachinery components or precision rotating assemblies with understanding of unbalance and balance-correction principles.
  • Knowledge of precision fixturing, GD&T, datum structures, alignment, and runout.
  • Ability to troubleshoot and document repeatable balancing methodologies.

Responsibilities

  • Lead specification, selection, installation, and qualification of balancing stations and related equipment.
  • Develop and validate component- and assembly-level balancing processes.
  • Design and qualify balancing arbors, mandrels, collets, and fixtures.
  • Establish calibration, verification, and measurement-system evaluation methods.
  • Collaborate with CNC Manufacturing on material-removal correction processes.
  • Translate product requirements into balancing specs, inspection criteria, and acceptance criteria.
  • Troubleshoot balance discrepancies and identify root causes.
  • Create setup procedures, work instructions, and training guides; provide hands-on production support.
  • Establish traceability for balance measurements and tool configurations.
  • Improve cycle time, first-pass yield, and process consistency.

Skills

Turbomachinery balancing
Balancing equipment
Rotor balancing
GD&T
Troubleshooting
Production support

Education

Engineering degree

Tools

Schenck equipment
Hofmann equipment
CEMB equipment
Siemens NX

Job description

Senior Manufacturing Engineer, Turbomachinery Balancing

Huntington Beach, California, United States

About Mach Industries

Founded in 2023, Mach Industries is a rapidly growing defense technology company focused on developing next-generation autonomous defense platforms. At the core of our mission is the commitment to delivering scalable, decentralized defense systems that enhance the strategic capabilities of the United States and its allies. With a workforce of approximately 350 employees, we operate with startup agility and ambition.

Our vision is to redefine the future of warfare through cutting‑edge manufacturing, innovation at speed, and unwavering focus on national security. We are dedicated to solving the next generation of warfare with lethal systems that deter kinetic conflict and protect global security.

The Role

Mach Industries is seeking a Senior Manufacturing Engineer, Turbomachinery Balancing to establish, qualify, and scale balancing processes for our turbomachinery hardware. This role will support turbine wheels, compressor impellers and blisks, shafts, and complete rotating assemblies, taking balancing operations from development builds through repeatable production.

You will own the balancing process, including equipment selection and commissioning, tooling development, measurement validation, balance correction, and production implementation. We are looking for someone who has personally set up balancing stations, worked directly with rotating hardware, and demonstrated that the equipment, tooling, and process can consistently meet engineering requirements.

Working closely with Design Engineering, CNC Manufacturing, Quality, Test, and Automation, you will build a reliable internal balancing capability and translate specialized technical knowledge into robust processes that technicians can execute at production rate.

Key Responsibilities
  • Lead the specification, selection, installation, and qualification of balancing stations and associated equipment, including supplier coordination, factory acceptance testing, and site commissioning.
  • Develop and validate component‑level and assembly‑level balancing processes for turbine wheels, compressor components, shafts, and complete rotating groups.
  • Design, specify, and qualify balancing arbors, mandrels, collets, supports, and related fixtures, with emphasis on alignment, datum control, and repeatable part loading.
  • Establish calibration, verification, and measurement‑system evaluation methods that demonstrate the capability of the complete balancing process, including the machine, tooling, hardware, and operator.
  • Partner with CNC Manufacturing to develop controlled material‑removal correction processes that meet balance requirements while preserving dimensional conformity and component integrity.
  • Work with Design Engineering and Test to translate product requirements into balancing specifications, approved correction features, inspection requirements, and acceptance criteria.
  • Troubleshoot inconsistent balance results and identify root causes related to component variation, tooling, runout, assembly conditions, equipment setup, and measurement repeatability.
  • Create controlled setup procedures, work instructions, troubleshooting guides, and safe operating practices; train technicians and provide hands‑on production support.
  • Establish traceability for balance measurements, correction operations, tooling configurations, and final acceptance results in partnership with Quality and Manufacturing Systems.
  • Improve cycle time, first‑pass yield, and process consistency while supporting automation and the transfer of validated balancing processes into production facilities.
Required Qualifications
  • 5+ years of relevant experience in turbomachinery balancing, balancing‑equipment applications, or manufacturing/process engineering with direct ownership of rotor‑balancing processes.
  • Direct experience setting up and commissioning balancing stations, including equipment configuration, tooling implementation, calibration, and process validation.
  • Hands‑on experience balancing turbomachinery components or precision rotating assemblies, with a strong understanding of static and dynamic unbalance, single‑plane and two‑plane balancing, and balance‑correction principles.
  • Practical understanding of precision fixturing, GD&T, datum structures, alignment, concentricity, and runout.
  • Experience evaluating measurement repeatability, interpreting balance results, and resolving discrepancies between equipment readings and actual hardware or setup conditions.
  • A relevant engineering degree or equivalent practical experience developing and qualifying balancing equipment, tooling, and manufacturing processes.
  • Ability to independently troubleshoot technical problems, document repeatable methods, and work effectively with engineers, machinists, technicians, and equipment suppliers.
Preferred Qualifications
  • Experience with Schenck, Hofmann, or CEMB balancing equipment and associated measurement systems or software.
  • Experience balancing or developing material‑removal correction processes for nickel‑based superalloys, including MAR‑M‑247, Inconel, or similar materials.
  • Experience with small gas turbines, turbochargers, turbine rotors, compressor impellers, titanium compressor components, or other high‑speed rotating hardware.
  • Familiarity with the ISO 21940 series, including rotor‑balancing requirements and balancing‑machine capability evaluation.
  • Experience integrating balancing equipment with CNC correction, automated handling, inspection, or manufacturing data systems.
  • Experience in balancing‑equipment applications engineering, field service, or customer commissioning, or experience designing precision tooling using Siemens NX or comparable CAD software.
Additional Requirements
  • Available to work extended hours and weekends as needed

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .

$140,000 - $180,000 USD

Principal Engineer

$195,000 - $220,000 USD

At Mach, we believe that compensation is more than just a paycheck. It's a comprehensive package designed to reward the time, skills, and expertise you bring to our team. We are committed to offering competitive compensation that is equitable, transparent, and aligned with market trends.

Key Elements of Our Compensation Philosophy:

  • Competitive Salaries: We continuously research market rates to ensure our salaries are competitive with those in our industry and geographic location.
  • Performance‑Based Incentives: Our bonus structure is tied to both individual and company performance, creating a win‑win scenario that motivates our team members to excel.
  • Equity Participation: We offer stock options or equity to employees, ensuring that you share in the success and growth of the company.
  • Benefit Packages: Our benefits include healthcare, dental and vision plans, retirement savings, and paid time off, because we understand that your well‑being extends beyond the office.
  • Professional Development: We allocate funds for continuing education, training, and career growth.
  • Transparency: We are committed to openness about our compensation tiers and how decisions are made, ensuring trust and mutual respect.

By joining Mach, you’re not just accepting a job—you’re becoming a key part of a team that values your contributions and invests in your growth. Together, we aim to create a rewarding environment that sets the stage for long‑term success.

This position may require access to information protected under U.S. export control laws and regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR). Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export control laws and regulations without sponsorship for an export license.

Mach participates in E‑Verify and will provide the federal government with your Form I‑9 information to confirm that you are authorized to work in the U.S.

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offers may vary based on (but not limited to) work experience, education and training, critical skills, and business considerations. Highly competitive equity grants are included in most offers and are considered part of Mach’s total compensation package. Mach offers benefits such as health insurance, retirement plans, and opportunities for professional development.

Mach is an equal opportunity employer committed to creating a diverse and inclusive workplace. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws.

Learn more about ITAR here.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Structures Engineer, Turbomachinery
Structures Engineer, Turbomachinery

MACH INDUSTRIES • San Luis Obispo (CA)

On-site
USD 115,000 - 195,000
Structures Engineer, Turbomachinery
Structures Engineer, Turbomachinery

Mach Industries • San Luis Obispo (CA)

On-site
USD 115,000 - 195,000
Senior Manufacturing Engineer, Jet Engine
Senior Manufacturing Engineer, Jet Engine

Mach Industries • Huntington Beach (CA)

On-site
USD 140,000 - 180,000
Manufacturing Engineer, CNC
Manufacturing Engineer, CNC

MACH INDUSTRIES • Los Angeles (CA)

On-site
USD 105,000 - 180,000
Health insurance
Equity options
Retirement plan
+2
Performance Engineer
Performance Engineer

Mach Industries • San Luis Obispo (CA)

On-site
USD 85,000 - 120,000
Health insurance
Retirement plans
Professional development opportunities
Propulsion Mechanical Design Engineer (Mid-Career) New San Luis Obispo, California, United States
Propulsion Mechanical Design Engineer (Mid-Career) New San Luis Obispo, California, United States

Mach Industries Inc. • San Luis Obispo (CA)

On-site
USD 115,000 - 195,000
Healthcare
Dental & Vision
Retirement plan
+3
Engineering Technician
Engineering Technician

Mach Industries • Victorville (CA)

On-site
USD 55,000 - 75,000
Propulsion Mechanical Design Engineer (Mid-Career)
Propulsion Mechanical Design Engineer (Mid-Career)

MACH INDUSTRIES • San Luis Obispo (CA)

On-site
USD 115,000 - 195,000
Healthcare
Retirement plans
Paid time off
+1
Manufacturing Engineer, CNC
Manufacturing Engineer, CNC

Mach Industries • Huntington Beach (CA)

On-site
USD 105,000 - 140,000
Equity participation
Health insurance
Retirement plans
+2
Lead Manufacturing Engineer, Test
Lead Manufacturing Engineer, Test

Mach Industries • Huntington Beach (CA)

On-site
USD 140,000 - 180,000
Equity participation
Healthcare
Retirement plans
+2