Senior IQC Inspector

Rocket Lab Corporation

Pasadena (CA)

On-site

USD 44,000 - 55,000

Full time

6 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Employee stock purchase program
Top-tier medical plans
Dental and vision coverage
Paid vacation and sick time
11 paid holidays
Employee discounts

Job summary

Rocket Lab Corporation in Pasadena, CA is seeking a Senior IQC Inspector to support incoming material and component inspection for high‑reliability spaceflight hardware. You will interpret complex drawings and GD&T, perform dimensional and visual inspections, and ensure supplier documentation meets aerospace standards.

Based in a high‑mix, low‑volume environment, you will maintain traceability, support NCR investigations, and collaborate with Quality Engineering and Supply Chain to drive

Qualifications

  • 5+ years of aerospace quality inspection experience.
  • Strong ability to interpret drawings, GD&T, tolerances.
  • Experience inspecting precision machined components and PCBAs.
  • Familiarity with AS9100 and IPC/J-STD requirements.
  • Ability to document compliance and traceability.

Responsibilities

  • Incoming inspection of materials, components, assemblies, and supplier hardware.
  • Perform dimensional, visual, and mechanical inspections with measurement equipment.
  • Review drawings, specs, POs and inspection requirements.
  • Verify material certifications and conformity documentation.
  • Identify nonconformances and initiate corrective actions with QA and Supply Chain.
  • Coordinate inspection priorities with Production Control and Manufacturing Operations.
  • Ensure compliance with AS9100 and customer requirements.
  • Mentor junior inspectors and improve inspection methods.

Skills

Quality inspection
GD&T
AS9100
IPC/J-STD
Metrology tools

Education

High school diploma

Tools

CMMs
Calipers
Micrometers
Height gauges
Indicators

Job description

Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity’s reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us.

SPACE SYSTEMS

At Rocket Lab, we’re not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more.

Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it’s a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions.

SENIOR IQC INSPECTOR

Rocket Lab Robotics specializes in high-performance robotic systems and precision mechanisms that enable the most ambitious space missions, including NASA’s Mars Perseverance Rover and CADRE lunar rovers. Leveraging Mars-proven expertise from Motiv Space Systems, we deliver scalable, flight‑proven solutions – such as robotic arms, motion control systems, and solar array drive assemblies (SADAs) – to support planetary exploration, satellite servicing, and national security missions.

Based in Pasadena, California the Senior Incoming Quality Control (IQC) Inspector will support the development, qualification, and production of advanced spaceflight hardware, including robotic systems, precision electromechanical mechanisms, motion control electronics, optomechanical assemblies, and other high‑reliability spacecraft components.

The Senior IQC Inspector is responsible for performing detailed incoming inspections of purchased materials, precision machined components, electronic assemblies, and supplier‑provided hardware to ensure compliance with engineering specifications, purchase order requirements, and applicable aerospace quality standards.

This position requires advanced technical inspection skills, strong proficiency in interpreting engineering drawings and geometric dimensioning and tolerancing (GD&T), and the ability to independently evaluate complex mechanical and electrical components.The successful candidate will demonstrate exceptional attention to detail, sound technical judgment, and experience working in a high‑mix, low‑volume aerospace manufacturing environment where product conformity, traceability, and documentation are critical.

WHAT YOU’LL GET TO DO:

Incoming Material and Component Inspection

  • Perform incoming inspections of purchased materials, components, assemblies, and supplier‑provided hardware to verify compliance with engineering and procurement requirements.
  • Inspect precision machined components, mechanical assemblies, electronic components, printed circuit board assemblies (PCBAs), cables, connectors, and electromechanical hardware.
  • Review engineering drawings, specifications, purchase orders, and inspection requirements to establish applicable acceptance criteria.
  • Perform dimensional, visual, and mechanical inspections using appropriate measurement and verification equipment.
  • Verify material certifications, certificates of conformity, inspection reports, and other required supplier documentation.
  • Confirm part identification, revision levels, quantities, material specifications, and configuration requirements.
  • Inspect received hardware for workmanship defects, physical damage, dimensional discrepancies, and other conditions affecting product conformity.
  • Ensure incoming inspection activities are completed in accordance with established quality procedures and applicable customer requirements.

Precision Inspection and Metrology

  • Interpret complex engineering drawings, GD&T requirements, dimensional tolerances, and surface finish specifications.
  • Perform precision dimensional inspections using calipers, micrometers, height gauges, bore gauges, indicators, thread gauges, optical measurement systems, and other metrology equipment.
  • Utilize coordinate measuring machines (CMMs) and other advanced inspection equipment where applicable.
  • Evaluate dimensional inspection results against engineering specifications and acceptance requirements.
  • Select appropriate inspection methods and measurement equipment based on component geometry, tolerances, and technical requirements.
  • Identify measurement discrepancies and coordinate resolution of inspection‑related technical issues.
  • Ensure inspection equipment is properly calibrated and suitable for its intended use.
  • Support development and improvement of inspection methods for complex or challenging components.

Electronic and Electromechanical Inspection

  • Perform visual and workmanship inspections of PCBAs, electronic components, wiring assemblies, and electromechanical hardware.
  • Verify compliance with applicable IPC, J-STD, NASA, and customer‑specific workmanship requirements.
  • Inspect solder joints, connectors, wiring, component placement, mechanical interfaces, and other applicable assembly features.
  • Identify evidence of manufacturing defects, handling damage, electrostatic discharge (ESD) risks, contamination, or improper workmanship.
  • Verify part identification, date codes, lot codes, and component traceability requirements.
  • Support counterfeit electronic component prevention and detection processes.
  • Coordinate with Quality Engineering and Electrical Engineering to resolve technical questions regarding electronic component acceptance.

Material Traceability and Documentation

  • Verify that received materials and components are accompanied by required certifications, inspection records, and traceability documentation.
  • Review material certifications, special process certifications, and supplier documentation for compliance with purchase order and engineering requirements.
  • Confirm material identification, heat or lot numbers, serial numbers, and other traceability information as applicable.
  • Ensure incoming inspection results and acceptance records are accurately documented and retained.
  • Maintain inspection records within applicable ERP/MRP, quality management, or electronic documentation systems.
  • Identify missing, incomplete, or inconsistent supplier documentation and coordinate resolution with Supply Chain and Quality Engineering.
  • Support compliance with applicable aerospace material traceability and record retention requirements.

Nonconformance Identification and Control

  • Identify, document, and report nonconforming purchased materials, components, and assemblies.
  • Initiate nonconformance reports in accordance with established quality procedures.
  • Ensure suspect or nonconforming hardware is appropriately identified, segregated, and controlled to prevent unintended use.
  • Provide detailed inspection findings and supporting measurement data to Quality Engineering and Supply Chain.
  • Support investigation of supplier‑related defects, documentation discrepancies, and recurring quality issues.
  • Participate in corrective action investigations and supplier quality improvement activities as requested.
  • Verify completion of authorized reinspection activities following supplier rework or corrective action.
  • Escalate significant product conformity or traceability concerns to Quality management.

Inspection Planning and Coordination

  • Coordinate incoming inspection priorities with Supply Chain, Production Control, and Manufacturing Operations.
  • Identify inspection requirements associated with critical program materials and upcoming manufacturing activities.
  • Communicate inspection status, material discrepancies, and potential delays affecting material availability.
  • Support development of incoming inspection plans, checklists, and standardized inspection procedures.
  • Assist Quality Engineering in establishing appropriate inspection methods and sampling requirements.
  • Provide input regarding inspection equipment, tooling, and resource requirements.
  • Support timely inspection and release of conforming materials while maintaining quality and compliance standards.

Quality System Compliance

  • Perform inspection activities in accordance with the organization’s AS9100 Quality Management System and applicable customer requirements.
  • Maintain accurate, complete, and traceable inspection documentation.
  • Support internal, customer, and third‑party quality audits.
  • Participate in continuous improvement activities related to incoming inspection processes and supplier quality.
  • Ensure adherence to established material handling, ESD control, contamination prevention, and product protection requirements.
  • Support First Article Inspection activities and review of supplier‑provided AS9102 documentation where applicable.
  • Promote consistent application of quality standards and product acceptance requirements.

Technical Leadership and Continuous Improvement

  • Serve as a technical resource for incoming inspection methods, precision measurement, and product acceptance requirements.
  • Provide guidance and mentorship to less‑experienced inspectors.
  • Assist in developing standardized inspection practices, checklists, and work instructions.
  • Identify opportunities to improve inspection efficiency, accuracy, and repeatability.
  • Recommend improvements to inspection equipment, measurement methods, and documentation processes.
  • Support training and qualification of inspection personnel on applicable techniques and workmanship standards.
  • Collaborate with Quality Engineering and Supply Chain to identify recurring supplier defects and opportunities for improvement.
  • Maintain current knowledge of applicable aerospace inspection methods, measurement technologies, and quality requirements.

QUALIFICATIONS YOU'LL BRING:

  • High school diploma or equivalent; additional technical education or specialized inspection training preferred.
  • 5+ years of experience in quality inspection, precision dimensional inspection, or incoming quality control within aerospace, defense, electronics, or other high‑reliability manufacturing environments.
  • Demonstrated experience inspecting precision machined components, mechanical assemblies, and/or electronic hardware.
  • Strong proficiency interpreting engineering drawings, GD&T, dimensional tolerances, and technical specifications.
  • Experience using precision measurement equipment, including calipers, micrometers, height gauges, indicators, and other metrology tools.
  • Experience reviewing material certifications, certificates of conformity, and supplier inspection documentation.
  • Familiarity with aerospace material traceability, configuration control, and quality documentation requirements.
  • Experience identifying, documenting, and controlling nonconforming materials.
  • Working knowledge of AS9100 quality management requirements and manufacturing inspection practices.
  • Ability to independently perform detailed inspections and make product acceptance or rejection decisions within established quality procedures and delegated authority.
  • Strong attention to detail, organizational skills, and technical problem‑solving capabilities.
  • Ability to communicate effectively with Engineering, Supply Chain, Manufacturing, and Quality personnel.

THESE QUALIFICATIONS WOULD BE NICE TO HAVE:

  • Experience inspecting spacecraft hardware, precision mechanisms, robotic systems, electromechanical assemblies, or other high‑reliability aerospace components.
  • Experience with both mechanical and electronic component inspection.
  • Proficiency interpreting complex GD&T requirements in accordance with ASME Y14.5.
  • Experience operating coordinate measuring machines (CMMs), optical comparators, or advanced dimensional inspection equipment.
  • Familiarity with IPC-A-610, IPC/WHMA-A-620, J-STD-001, and applicable NASA workmanship standards.
  • Experience with AS9102 First Article Inspection requirements.
  • Familiarity with counterfeit electronic component prevention requirements and inspection practices.
  • Experience reviewing special process certifications, material test reports, and supplier quality documentation.
  • Experience working in high‑mix, low‑volume aerospace manufacturing environments.
  • Familiarity with ERP/MRP systems and electronic inspection documentation.
  • Experience supporting supplier corrective action activities and quality improvement initiatives.
  • Certification as an ASQ Certified Quality Inspector, Certified Quality Technician, or equivalent.
  • Experience mentoring or training junior inspection personnel.

This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas.

Level and base salary will be determined on a case‑by‑case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one component of our total rewards package at Rocket Lab. Our comprehensive benefits package includes our industry‑leading Employee Stock Purchase Program (with a 15% discount on company stock), top‑tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match.

Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts.

Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.

Hourly Pay Range (CA Only)

$32 - $40 USD

WHAT TO EXPECT

We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.

FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here .

FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:

For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.

Under these Regulations, you may be ineligible for this role if you hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey.Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.

As set forth in Rocket Lab Corporation’s Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection.As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service‑connected disability.

A "recently separated veteran" means any veteran during the three‑year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Quality Technician
Senior Quality Technician

Rocket Lab Corporation • Albuquerque (NM)

On-site
USD 65,000 - 90,000
Integration & Test Engineer I
Integration & Test Engineer I

Rocket Lab Corporation • Long Beach (CA)

On-site
USD 90,000 - 126,000
Subsidized EV charging
Onsite fitness centers
Discounted gym memberships
+3
Senior Equipment Maintenance Technician
Senior Equipment Maintenance Technician

Rocket Lab Corporation • Long Beach (CA)

On-site
USD 41,000 - 62,000
Employee Stock Purchase Program
Medical plans (HMO/PPO)
Dental and vision coverage
+5
Quality Engineering Intern Spring 2027
Quality Engineering Intern Spring 2027

Rocket Lab Corporation • Long Beach (CA)

On-site
USD 32,000 - 45,000
Relocation stipend
Employee stock purchase program
Medical, dental & vision plans
+2
Lead Assembly Integration & Test Technician
Lead Assembly Integration & Test Technician

Rocket Lab Corporation • Long Beach (CA)

On-site
USD 55,000 - 69,000
Aerospace Test Technician III
Aerospace Test Technician III

Rocket Lab Corporation • Silver Spring (MD)

On-site
USD 54,000 - 66,000
Stock Purchase Program
Health Insurance
401(k) with match
+1
Senior Quality Technician
Senior Quality Technician

Rocket Lab Corporation • Tucson (AZ)

On-site
USD 70,000 - 95,000
Senior Program Manager II(TS/SCI)
Senior Program Manager II(TS/SCI)

Rocket Lab USA • Long Beach (CA)

On-site
USD 153,000 - 230,000
Lead, Operations Software
Lead, Operations Software

Rocket Lab Corporation • Long Beach (CA)

On-site
USD 142,000 - 180,000
Employee Stock Purchase Program
Company stock in total compensation
Top-tier medical plans (HMO, PPO, HDHP
+9
Environmental Test Technician II
Environmental Test Technician II

Rocket Lab Corporation • Silver Spring (MD)

On-site
USD 47,000 - 58,000
Employee Stock Purchase Program
Stock-based compensation potential
Health insurance (medical)
+9