Senior Geotechnical Engineer

AES Corporation; Houston (TX); Hybride; USD 108 000 - 135 000; Plein temps

Avantages offerts par ce poste

Medical, dental, and vision coverage

401(k) eligibility

Paid time off

Life insurance

Résumé du poste

AES Corporation is seeking a Senior Geotechnical Engineer to provide expert support across wind, PV, and battery storage projects from development through operations. You will guide foundation design, risk assessment, and cost estimation while coordinating with consultants and AES teams on scalable geotechnical solutions.

The role requires deep knowledge of soil mechanics, project execution, and QA/QC for large-scale renewable energy facilities.

Qualifications

• Bachelor’s degree in Civil, Geotechnical, or Geological Engineering.
• At least 6 years of progressive experience in geotechnical engineering design, analysis, and construction support.
• Minimum 2 years' experience with PV solar, wind, battery energy storage, and high-voltage facility design.
• Field experience on large-scale civil/geotechnical projects, including geotechnical QA/QC and construction oversight.

Responsabilités

• Identify geotechnical risks during early project development and provide recommendations on design and cost estimation.
• Conduct preliminary site hazard assessments for developments in the planning phase.
• Prepare initial cost estimates for geotechnical investigations and recommend consultants for RFPs and address RFIs during construction.
• Collaborate with consultants to define scopes of work for project-specific geotechnical investigations.
• Finalize investigation scope, cost, and schedule prior to contract award.
• Review geotechnical reports for technical accuracy and compliance with project requirements.
• Assess laboratory and field data relevant to foundation design and construction.
• Advise on design parameters including foundation embedment, earthworks, and geohazard considerations.
• Support mergers and acquisitions due diligence concerning potential asset acquisitions.
• Work with AES staff and consultants to develop and review design packages (30%, 60%, 90%, 100%, IFP, and IFC).
• Document deviations from project geotechnical recommendations.
• Evaluate design solutions for turbines, solar trackers, energy storage, and related infrastructure.
• Adjust contract specifications to support EPC negotiations.
• Assist project management and engineering with troubleshooting or remediation plans.
• Conduct site visits and field inspections for foundation, earthwork, and ground stability assessments during construction and operations.
• Carry out safety assessments and site walks to identify workplace hazards.
• Partner with Operations and Maintenance and Asset Management teams on operational troubleshooting and remediation plans.
• Develop solutions for system modifications and resolve geotechnical issues among subcontractors and vendors.
• Perform root cause analyses for geotechnical-related failures.
• Serve as a technical resource on geotechnical topics.
• Participate in internal and external meetings.
• Evaluate geotechnical consultants for Master Service Agreement consideration.
• Mentor staff on new technologies, construction practices, and safety protocols.
• Engage process improvement initiatives.
• Maintain awareness of industry standards and emerging geotechnical technologies.
• Support innovation with reviews related to structural design.

Connaissances

Geotechnical engineering

Soil mechanics

Foundation design

Project management

MS Office

AutoCAD

Bluebeam

Spanish language proficiency

Formation

Bachelor's degree in Civil, Geotechnical, or Geological Engineering

Outils

LPILE

MFAD

Slope/W

Plaxis

FLAC

SIGMA/W

Description du poste

Are you ready to be part of a companythat'snot just talking about the future, but actively shaping it? Join The AES Corporation, the largest US-based global power company witha teamof 8,300employees across 12 countries.

AES has beenranked #1 byBloombergNEFin renewable energy sales to corporations in the US and Americas for five consecutive years, providing electricityformillions of peopleworldwide.

We are proud to foster a strong workplace culture, earning prominent positions in Great Place to Work rankings across the markets where weoperate. AES was also named one of the World's Most Ethical Companies for the 13th consecutive year in 2026, highlighting our dedication to integrity, transparency, and responsible business practices.

Our spirit of innovation continues to earn industry recognition. AES is the only seven-time winner of the Edison Electric Institute's Edison Awards in the twenty-first century, a distinction honoringglobal leadership in advancing the electric power industry.

Ifyou'reready to be part of a companythat'snot just adapting to change, but driving it, AES is the place for you.We'renot just building a more sustainable future,we'repowering it.

AES is recruiting a Senior Geotechnical Engineer to provide technical expertise in all phases of renewable energy project development, from the initial stages through construction and operations. This role will support the delivery of foundation solutions for wind, photovoltaic (PV), and grid-scale battery storage facilities ranging in capacity from less than 5 MW to over 1,000 MW.

The Senior Geotechnical Engineer will address geotechnical matters across project teams to optimize design, mitigate risk, and help ensure successful results. The position requires adaptability and time management skills to handle multiple geotechnical requests of varying complexity while upholding standards for safety, technical quality, and professional integrity.

Candidates should have a deep understanding of geotechnical engineering principles, soil mechanics, and foundation design methodologies. Significant experience in foundation, earthwork, roadway, and slope stability design and review for large renewable energy projects is required.

We are open to hiring a candidate outside of the listed locations. However, if a candidate is located near one of the office locations, there will be potentital hybrid arrangements.

Key Responsibilities

Project Development and Risk Assessment

• Identify geotechnical risks during early project development and provide recommendations on design and cost estimation.
• Conduct preliminary site hazard assessments for developments in the planning phase.
• Prepare initial cost estimates for geotechnical investigations and recommend consultants for request for proposal processes and address requests for information during construction
• Collaborate with consultants to define scopes of work for project-specific geotechnical investigations.
• Finalize investigation scope, cost, and schedule prior to contract award.
• Review geotechnical reports for technical accuracy and compliance with project requirements.
• Assess laboratory and field data relevant to foundation design and construction.
• Advise on design parameters including foundation embedment, earthworks, and geohazard considerations.
• Support mergers and acquisitions due diligence concerning potential asset acquisitions.

Project Execution

• Work with AES staff and consultants to develop and review design packages (30%, 60%, 90%, 100%, IFP, and IFC civil, structural, and electrical).
• Document any deviations from project geotechnical recommendations.
• Evaluate design solutions for turbines, solar trackers, energy storage, and related infrastructure.
• Adjust contract specifications as needed to support EPC contract negotiations.

Project Construction and Quality Assurance

• Assist project management and engineering with troubleshooting or alternative remediation plans.
• Conduct site visits and field inspections for foundation, earthwork, and ground stability assessments during construction and operations.
• Carry out safety assessments and site walks to identify workplace hazards.

Asset Management and Operational Support

• Partner with Operations and Maintenance and Asset Management teams on operational troubleshooting and remediation plans.
• Develop solutions for system modifications and resolve geotechnical issues among subcontractors and vendors.
• Perform root cause analyses for geotechnical-related failures.

Stakeholder Engagement and Communication

• Serve as a technical resource on geotechnical topics.
• Participate in internal and external meetings.
• Evaluate geotechnical consultants for Master Service Agreement consideration.

Organization Maturity and Innovation

• Mentor staff on new technologies, construction practices, and safety protocols.
• Engage process improvement initiatives.
• Maintain awareness of industry standards and emerging geotechnical technologies.
• Support innovation with reviews related to structural design.

Skills And Qualifications

Education and Experience

• Bachelor's degree in Civil, Geotechnical, or Geological Engineering.
• At least 6 years' progressive experience in geotechnical engineering design, analysis, and construction support.
• Minimum 2 years' experience with PV solar, wind, battery energy storage, and high-voltage facility design.
• Field experience on large-scale civil/geotechnical projects, including geotechnical QA/QC and construction oversight.

Technical Competencies

• Advanced knowledge of geotechnical engineering, soil mechanics, foundation design, geological conditions, subsurface risks, and site characterization methods.
• Proficiency with geotechnical software and tools (LPILE, MFAD, Slope/W, etc.).
• Experience with SPT, CPT, pile load testing, and geophysical methods (MASW, seismic refraction, electrical resistivity imaging).
• Knowledge of relevant codes and standards (AASHTO, ACI, IBC, ISO, ASCE 7, DNV).
• Familiarity with civil design elements such as cut/fill analysis, stormwater, and road design.

Professional Skills

• Effective written and verbal communication skills.
• Ability to manage multiple projects simultaneously.
• Proficiency with Microsoft Office Suite (especially Excel), AutoCAD, and Bluebeam.
• Strong analytical, problem-solving, and attention to detail.

Preferred Qualifications

• PE license or eligibility.
• Master's degree in an engineering discipline.
• MSHA/OSHA 10-hour certification (or equivalent).
• Spanish language proficiency.
• Familiarity with finite element modeling (Plaxis, FLAC, SIGMA/W).

Working Conditions and Physical Requirements

• Office-based role with potential hybrid arrangements.
• Up to 25% travel for site visits, meetings, and inspections.
• Occasional construction site exposure requiring PPE.
• Ability to work in varying weather conditions during fieldwork.
• Typical office ergonomics with prolonged computer use.
• Full professional English fluency.

AES is an Equal Opportunity Employer who is committed to building strength and delivering long-term sustainability through diversity and inclusion. Respecting all backgrounds, differences and perspectives enables us to improve the lives of our people, customers, suppliers, contractors, and the communities in which we live and work. All qualified applicants will receive consideration for employment without regard to sex, sexual orientation, gender, gender identity and/or expression, race, national origin, ethnicity, age, religion, marital status, physical or mental disability, pregnancy, childbirth, or related medical condition, military or veteran status, or any other characteristic protected under applicable law.

E-Verify Notice: AES will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's I-9 to confirm work authorization.

The expected salary for this position, at commencement of employment, is between $108,000 and $135,150/year; however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position also includes annual bonus. The benefits offered for this position are: medical, dental, and vision coverage, life insurance, 401(k) eligibility, and paid time off (including vacation, sick leave time, and parental leave). Details of participation in these benefit plans will be provided if a candidate receives an offer of employment. If hired, employee will be in an "at-will position" and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors.

The deadline to apply for this role is 11/06/2026