Senior Embedded Software Engineer (Small UAV Flight Controls)

Knightwerx

Scottsdale (AZ)

On-site

USD 120,000 - 180,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Knightwerx is seeking a Senior Embedded Software Engineer to architect, develop, and test deterministic flight control firmware for small UAVs. You will own the software layer between guidance algorithms and actuation, ensuring ultra-low latency on lightweight hardware.

The role involves building robust, high-integrity code for bare-metal/RTOS environments, integrating with sensors and actuators, and optimizing for power and space constraints while maintaining safety-critical performance.

Qualifications

  • Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, Robotics, or a related technical discipline.
  • Experience developing production-grade embedded C/C++ software for real-time systems.
  • Extensive experience with ARM Cortex-M or similar architectures, registers, timers, DMA, and interrupt handling.
  • Hands-on experience using oscilloscopes, logic analyzers, multi-meters, and JTAG/SWD debuggers to isolate hardware vs. software issues.
  • Practical understanding of digital filtering used to mitigate high-frequency frame vibrations in small UAVs.

Responsibilities

  • Flight Software & Driver Development: Design, optimize, and implement high-rate stabilization loops, attitude control, and actuator mixing logic in C and C++.
  • System Integration & Deterministic Communication: Manage CAN (UAVCAN/Cyphal), SPI, I2C, UART, to interface with ESCs and servos; implement FDIR.
  • SWaP Optimization & Architecture: Profile memory footprint and CPU usage on ARM Cortex cores; open-source stack hardening for PX4/ArduPilot when applicable.

Skills

Firmware expertise
ARM Cortex-M
RTOS experience
Lab tools
State estimation

Education

Bachelor's or Master's in related field

Tools

JTAG/SWD
Oscilloscope
Logic analyzer
Multimeter

Job description

Job Description
Role Overview

We are seeking a Senior Embedded Software Engineer for Small UAV Flight Controls to

architect, develop, and test deterministic, safety-critical flight control firmware for our

small unmanned aerial vehicles (Group 1 and Group 2 tactical aircraft, fixed-wing, or hybrid

VTOLs). In this role, you will own the software layer that sits directly between complex

guidance algorithms and physical aircraft actuation, ensuring maximum stability, agility,

and responsiveness on lightweight, space-constrained hardware.

You will bridge the gap between control theory and low-SWaP (Size, Weight, and Power)

bare-metal or RTOS execution. You will write robust, high-integrity code that operates

under strict real-time constraints, optimizing every clock cycle to ensure ultra-low latency

from sensor sample to actuator command.

Key Responsibilities
Flight Software & Driver Development
  • Control Loop Execution: Design, optimize, and implement high-rate stabilization loops, attitude control algorithms, and actuator mixing logic in C and C++.
  • Low-Level Drivers: Develop and maintain bare-metal peripheral drivers for highly integrated microcontrollers to interface with IMUs, magnetometers, barometers, airspeed sensors, and GPS modules.
  • RTOS Optimization: Configure and profile Real-Time Operating Systems (e.g., FreeRTOS, ChibiOS, Zephyr) for highly predictable task scheduling, deterministic execution, and minimal jitter.
System Integration & Deterministic Communication
  • Bus Architecture: Manage and optimize communication protocols over lightweight, low-pin-count buses including CAN bus (UAVCAN/Cyphal), SPI, I2C, and UART to interface with Electronic Speed Controllers (ESCs) and servos.
  • Fault Tolerance: Implement robust fault detection, isolation, and recovery (FDIR) mechanisms to immediately handle small UAV anomalies, such as sensor dropouts, frame vibrations, or battery voltage drops.
  • HIL Testing: Build and utilize Hardware-in-the-Loop (HIL) simulation setups to safely validate flight software performance and corner-case failure modes on the bench.
SWaP Optimization & Architecture
  • Resource Management: Target, profile, and optimize memory footprint (SRAM/Flash) and CPU usage on high-performance microcontrollers (e.g., ARM Cortex-M4/M7/H7).
  • Open-Source Hardening: (If applicable) Maintain, customize, and secure opensource small UAV ecosystems like PX4, ArduPilot, or Betaflight for custom proprietary hardware configurations.
Required Skills & Qualifications
  • Education: Bachelor’s or Master’s degree in Computer Engineering, Electrical Engineering, Robotics, or a related technical discipline.
  • Firmware Expertise: Deep professional experience developing production-grade embedded C and C++ software for real-time systems.
  • Microcontroller Fluency: Extensive experience with ARM Cortex-M or similar architectures, registers, timers, DMA, and interrupt handling.
  • Lab Tool Proficiency: Hands-on experience using oscilloscopes, logic analyzers, multi-meters, and JTAG/SWD debuggers to isolate hardware vs. software issues.
  • State Estimation Basics: Practical understanding of digital filtering (e.g., notch filters, low-pass filters) used to mitigate high-frequency frame vibrations common in small UAVs.
Preferred Qualifications
  • Direct experience contributing to or deploying customized PX4 Autopilot or ArduPilot stacks onto custom small UAV airframes.
  • Background in mathematical modeling, MATLAB/Simulink code generation, or working alongside GNC engineers to port control laws into C.
  • Experience implementing lightweight safety protocols or functional safety frameworks scaled down for consumer, commercial, or defense-grade small UAV systems
About Knightwerx

Knightwerx develops American-made, AI-powered unmanned aerial systems and remote sensing technologies for commercial and government customers. Our platforms support autonomous operations, human-machine teaming, and mission-critical applications where reliability, performance, and speed matter.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Software Engineer 1
Software Engineer 1

Knightwerx • Scottsdale (AZ)

On-site
USD 80,000 - 110,000
Staff Motor Control Engineer (UAS / Autonomous Flight Systems)
Staff Motor Control Engineer (UAS / Autonomous Flight Systems)

Knightwerx • Scottsdale (AZ)

On-site
USD 140,000 - 210,000
Senior Flight Controls Engineer
Senior Flight Controls Engineer

Fruition Group • California

On-site
USD 100,000 - 130,000
High ownership and real-world impact
Work on aircrafts that fly, not just simulations
Join a deeply experienced team
Senior Software Engineer
Senior Software Engineer

Red Cat Holdings • Torrance (CA)

On-site
USD 132,000 - 183,000
Senior GNC / Autonomy Engineer
Senior GNC / Autonomy Engineer

Knightwerx • Scottsdale (AZ)

On-site
USD 120,000 - 190,000
Relocation assistance
Senior Software Engineer
Senior Software Engineer

FlightWave Aerospace - A Red Cat Company • Torrance (CA)

On-site
USD 132,000 - 183,000
UAV Electronics & Integration Technician
UAV Electronics & Integration Technician

Knightwerx • Scottsdale (AZ)

On-site
USD 85,000 - 110,000
Software Engineer
Software Engineer

Skyeton • Fayetteville (NC)

On-site
USD 110,000 - 140,000
Electrical Propulsion Engineer (Fixed-Wing & VTOL UAVs)
Electrical Propulsion Engineer (Fixed-Wing & VTOL UAVs)

Knightwerx • Scottsdale (AZ)

On-site
USD 110,000 - 150,000
Aero Mechanical Engineer - UAV Design
Aero Mechanical Engineer - UAV Design

Knightwerx • Scottsdale (AZ)

On-site
USD 110,000 - 170,000
Competitive compensation and benefits