Senior Electrical Engineer - Robotics

Johnson & Johnson Co.

Boston (MA)

Híbrido

USD 112 000 - 181 000

Tempo integral

Há 5 dias
Torna-te num dos primeiros candidatos

Uma candidatura completa num minuto

Currículo e carta de apresentação personalizados, prontos a enviar.

Ultrapassa os filtros ATS

Resumo da oferta

Johnson & Johnson is seeking a Senior Electrical Engineer - Robotics for its Orthopaedics team in Boston. This hybrid role requires up to 25% travel and focuses on advancing robotic medical device development.

You will contribute to electrical system architectures, design verification, and cross-functional collaboration to deliver safe and reliable capital equipment.

Qualificações

  • Bachelor's degree in Electrical Engineering or closely related field is required.
  • 4+ years of relevant engineering experience in electrical/electromechanical products.
  • Experience owning electrical designs within product development programs.
  • Medical device development experience is strongly preferred.
  • Strong knowledge of analog and digital circuit design and EMC.

Responsabilidades

  • Develop electrical system architectures for complex robotic medical devices.
  • Own electrical subsystems, ensuring performance, safety, reliability, and manufacturability.
  • Lead design trade studies and risk management for electrical designs.
  • Collaborate across Electrical, Mechanical, Systems, Software/Firmware, and Manufacturing teams.
  • Support IEC 60601 compliance activities and regulatory requirements.
  • Lead root cause investigations and drive corrective actions with cross-functional teams.
  • Prepare design documentation and participate in design reviews.
  • Contribute to prototyping, testing, and validation activities.

Conhecimentos

Electrical systems
Robotics
V&V
Root cause analysis
Cross-functional collaboration

Formação académica

Bachelor's Degree in Electrical Engineering
Master's Degree preferred

Ferramentas

Altium Designer
SPICE
ECAD

Descrição da oferta de emprego

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com

As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit.

Job Function:

R&D Product Development

Job Sub Function:

Robotics

Job Category:

Scientific/Technology

All Job Posting Locations:

Boston, Massachusetts, United States of America

Job Description:

We are searching for the best talent for a Senior Electrical Engineer - Robotics, to join our Orthopaedics team. This is a hybrid position based in Boston, MA. This position will require up to 25% domestic/international travel.

Purpose:

The Senior Electrical Engineer will be a key technical contributor within the Joints Robotics Hardware organization, supporting the existing VELYS Knee Robotic Hardware platform and future New Product Development (NPD) programs.

Key Responsibilities:
  • Develop and contribute to electrical system and subsystem architectures for complex robotic medical devices, translating system requirements into electrical requirements, interfaces, designs, and technical solutions.
  • Own electrical subsystems and complex electrical designs, making engineering decisions related to performance, safety, reliability, manufacturability, serviceability, and product lifecycle requirements.
  • Perform and contribute to technical trade studies and design decisions, evaluating performance, safety, reliability, cost, manufacturability, serviceability, and regulatory requirements.
  • Work cross-functionally to resolve complex system problems spanning Electrical, Mechanical, Systems, Software/Firmware, Controls, Manufacturing, Quality, and Supplier Engineering.
  • Support IEC 60601 compliance activities, including electrical safety, EMC, essential performance, and associated risk management, working with internal engineering teams and external test laboratories.
  • Partner with Systems Engineering, Quality, Regulatory Affairs, and other functions to translate applicable regulatory, safety, cybersecurity, usability, and product requirements into robust electrical engineering requirements and designs.
  • Lead root cause investigations within assigned areas of responsibility involving electrical, firmware, electromechanical, EMC, power, communication, signal integrity, or system interaction issues arising during development, verification, manufacturing, and field use.
  • Support and execute Design Verification and Validation (V&V) activities, including test development, design readiness, investigation of failures, analysis of results, and implementation of corrective actions.
  • Participate actively in design and architecture reviews, presenting technical work, challenging assumptions, identifying risks, and ensuring appropriate engineering rigor and documentation.
  • Develop and review design specifications, drawings, test methods, protocols, reports, and other technical documentation in accordance with applicable design controls and procedures.
  • Contribute to discovery, concept development, technology evaluation, feasibility, and prototyping, identifying technical risks and developing engineering solutions before detailed development.
  • Evaluate and implement enabling technologies applicable to robotic platforms, including sensing, motor control, power electronics, computing, communication, safety circuits, and electromechanical systems.
  • Partner with internal and external manufacturing organizations to develop and improve production test strategies for complex capital equipment.
  • Provide technical support to manufacturing partners and suppliers covering component development, device builds, production testing, assembly processes, PFMEAs, supplier technical issues, design transfer, and manufacturing readiness.
  • Apply Design for Manufacturing and Assembly (DFMA), Design for Reliability, Lean Six Sigma principles, FMEA, and engineering risk analysis to improve designs and support robust product development.
  • Contribute to continuous improvement of electrical designs, engineering methodologies, design standards, simulation practices, design reviews, verification strategies, and laboratory capabilities.
  • Promote reuse and standardization of proven electrical designs and technologies where appropriate to improve development efficiency, reliability, and maintainability.
  • Provide technical guidance and mentoring to less-experienced engineers, supporting knowledge sharing and development of strong engineering practices.
  • Coordinate and provide technical guidance to engineers, technicians, suppliers, and external engineering partners within assigned technical workstreams.
  • Represent Electrical Engineering in project discussions with cross-functional engineering teams, program teams, suppliers, manufacturing partners, external design organizations, and test laboratories.
  • Utilize advanced laboratory equipment, including oscilloscopes, logic analyzers, power analyzers, signal generators, electronic loads, spectrum analyzers, and EMI pre-compliance equipment, to characterize designs and resolve complex system issues.
Qualifications:

Required:

  • Bachelor's Degree in Electrical Engineering or a closely related engineering discipline required. Master's Degree preferred.
  • 4+ years of relevant engineering experience, with demonstrated experience developing complex electrical or electromechanical products.
  • Demonstrated experience owning complex electrical designs or technical workstreams within product development programs.
  • Experience in a regulated product development environment required; medical device experience strongly preferred.
  • Demonstrated ability to develop electrical subsystem architectures and make sound engineering decisions involving technical trade-offs.
  • Strong experience with analog and digital circuit design, board-level electronics, power distribution, communications interfaces, signal integrity, and electromechanical integration.
  • Strong experience designing PCBAs, including schematic development, component selection, analysis, layout oversight, design verification, manufacturing, and troubleshooting.
  • Strong understanding of electrical system architecture, grounding, shielding, EMC, power integrity, signal integrity, and electrical safety.
  • Experience developing complex electromechanical systems incorporating sensors, actuators, motors, embedded computing, communication interfaces, and power electronics.
  • Experience with Design for Manufacturing and Assembly (DFMA), Design for Reliability, Failure Mode and Effects Analysis (FMEA), and engineering risk management.
  • Demonstrated ability to perform and lead technical investigations using structured root cause methodologies, laboratory testing, and engineering analysis.
  • Ability to work effectively across engineering disciplines and influence technical decisions through data, analysis, and engineering judgment.
  • Ability to communicate complex technical concepts, design decisions, and technical risks clearly to engineering teams, project leadership, suppliers, and external partners.
  • Strong ability to operate independently within assigned areas of responsibility, prioritize competing needs, and manage multiple engineering activities.
Preferred:
  • Experience developing electrical systems for capital medical robotics, surgical navigation, or other complex safety-critical electromechanical systems.
  • Experience with robotics and motion-control systems.
  • Hands-on experience with motor control, servo systems, high-power electronics, motion systems, sensing, embedded systems, or real-time control architectures.
  • Experience working with industrial communication technologies such as EtherCAT, CAN, Ethernet, USB, PCIe, or similar high-performance interfaces.
  • Experience with industry-standard ECAD and simulation environments such as Altium Designer, SPICE, or equivalent engineering tools.
  • Experience working with external engineering partners, suppliers, contract manufacturers, and test laboratories during product development and transfer.
  • Working knowledge of IEC 60601, including electrical safety, EMC, and essential performance considerations.
  • Experience applying ISO 14971 risk management and ISO 13485 design control principles within medical device development.
  • Experience supporting regulatory submissions, certification testing, or responses to technical questions from regulatory, notified body, or certification organizations.
  • Experience contributing to reusable electrical designs, subsystem architectures, or technologies across multiple products or product generations.
  • Ability to provide technical guidance and mentoring to less-experienced engineers.
  • Ability to evaluate emerging technologies and determine their practical applicability to product development.
About Orthopaedics:

Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments.

Are you passionate about improving and expanding the possibilities of Orthopaedics? Ready to join a team that's reimagining how we heal? Our Orthopaedics teams help keep more than 6 million people moving each year while delivering clinical and economic value to surgeons and healthcare systems. Our teams build solutions for joint reconstruction; trauma and craniomaxillofacial; sports, extremities, and elective foot and ankle; spine; and robotics and digital surgery.

Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech

Johnson & Johnson announced plans to separate our Orthopaedics business to establish a standalone orthopaedics company, operating as DePuy Synthes. The process of the planned separation is anticipated to be completed within 18 to 24 months, subject to legal requirements, including consultation with works councils and other employee representative bodies, as may be required, regulatory approvals and other customary conditions and approvals. Should you accept this position, it is anticipated that, following conclusion of the transaction, you would be an employee of DePuy Synthes and your employment would be governed by DePuy Synthes employment processes, programs, policies, and benefit plans. In that case, details of any planned changes would be provided to you by DePuy Synthes at an appropriate time and subject to any necessary consultation processes.

Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act.

Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request accommodation, please contact us via https://www.jnj.com/contact-us/careers or contact AskGS to be directed to your accommodation resource.

Preferred Skills:

AI Judgement Integration, Computer Programming, Cost-Benefit Analysis (CBA), Critical Thinking, Data Science, Industrial Robotics, Industry Analysis, Innovation, Manufacturing Technologies, Problem Solving, Process Improvements, Prototyping, Relationship Building, Research and Development, Robotic Automation, Robotic Control Software, SAP Product Lifecycle Management, Technical Credibility, Technologically Savvy

The anticipated base pay range for this position is :

$112,000.00 - $180,550.00

Additional Description for Pay Transparency:

Subject to the terms of their respective plans, employees are eligible to participate in the Company's consolidated retirement plan (pension) and savings plan (401(k)).

Subject to the terms of their respective policies and date of hire, employees are eligible for the following time off benefits:
  • Vacation -120 hours per calendar year
  • Sick time - 40 hours per calendar year; for employees who reside in the State of Colorado -48 hours per calendar year; for employees who reside in the State of Washington -56 hours per calendar year
  • Holiday pay, including Floating Holidays -13 days per calendar year
  • Work, Personal and Family Time - up to 40 hours per calendar year
  • Parental Leave - 480 hours within one year of the birth/adoption/foster care of a child
  • Bereavement Leave - 240 hours for an immediate family member: 40 hours for an extended family member per calendar year
  • Caregiver Leave - 80 hours in a 52-week rolling period10 days
  • Volunteer Leave - 32 hours per calendar year
  • Military Spouse Time-Off - 80 hours per calendar year

For additional general information on Company benefits, please go to: https://www.careers.jnj.com/employee-benefits

For additional general information on Company benefits, please go to: https://www.careers.jnj.com/employee-benefits

Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

Staff Electrical Engineer - Robotics
Staff Electrical Engineer - Robotics

Johnson & Johnson Co. • Boston (MA)

Híbrido
USD 112 000 - 181 000
Hybrid work arrangement
Vacation and leave benefits
Senior Robotics Verification & Validation (V&V) Engineering Manager
Senior Robotics Verification & Validation (V&V) Engineering Manager

Biopharma Asia • Boston (MA)

Híbrido
USD 137 000 - 236 000
401(k) plan
Paid time off
Sr Manager, Robotics Systems Engineering
Sr Manager, Robotics Systems Engineering

Johnson & Johnson Co. • Raynham (MA)

Híbrido
USD 140 000 - 242 000
Vacation 120 hours
Sick time 40 hours
Holiday pay 13 days
+1
Senior R&D Mechanical Engineer
Senior R&D Mechanical Engineer

Brighter Signals • Boston (MA)

Híbrido
USD 94 000 - 152 000
Vacation time
Sick time
Holiday pay
+2
Senior Principal Engineer - R&D Digital
Senior Principal Engineer - R&D Digital

Brighter Signals • Boston (MA)

Teletrabalho
USD 140 000 - 242 000
Vacation time
Sick leave
Parental Leave
Senior R&D Program Manager
Senior R&D Program Manager

Johnson & Johnson Co. • Boston (MA)

Presencial
USD 140 000 - 242 000
Senior Principal Engineer - R&D Digital
Senior Principal Engineer - R&D Digital

Brighter Signals • EUA

Teletrabalho
USD 140 000 - 242 000
Senior Manager R&D - Mechanical Engineering
Senior Manager R&D - Mechanical Engineering

Brighter Signals • Boston (MA)

Híbrido
USD 137 000 - 236 000
Healthcare benefits
401(k) plan
Hybrid work in Boston
Senior Electrical Engineer - Robotics
Senior Electrical Engineer - Robotics

6149-DePuy Synthes Products Inc. Legal Entity • Boston (MA)

Híbrido
USD 112 000 - 181 000
Senior R&D Program Manager
Senior R&D Program Manager

Biopharma Asia • Boston (MA)

Presencial
USD 140 000 - 242 000
Vacation – 120 hours per year
Sick time – 40 hours per year
Holiday pay – 13 days per year
+5