Senior Electrical Engineer

Evolving Solution Services; Wichita, Northern (KS, KY); On-site; USD 110,000 - 140,000; Full time

Job summary

Senior Electrical Engineer role at Evolving Solution Services in Wichita, KS. This position focuses on rapid development of AI-enabled hardware and sensor platforms for cUAS and multi-sensor applications, designing high-speed digital, mixed-signal, and RF-supporting electronics.

Work with FPGA/SoC, embedded software, RF, DSP, and mechanical teams to move concepts to reusable platform designs; requires hands-on bring-up and test, and the ability to document decisions clearly.

Qualifications

• Eligible to obtain a U.S. Security Clearance - U.S. Citizenship required.
• B.S. in Electrical Engineering, Computer Engineering, or related technical field.
• 5+ years of experience designing high-speed digital, mixed-signal, embedded electronics, FPGA/SoC carrier boards, RF-adjacent hardware, or similar systems.
• Strong schematic capture and PCB design experience; Altium experience preferred.
• Working knowledge of high-speed serial design, differential signaling, controlled impedance, stack-up planning, timing, clocking, reset, and board-level signal integrity.
• Experience with power supplies, power sequencing, power integrity, thermal constraints, and dense embedded hardware design.
• Ability to design hardware that supports FPGA/SoC integration, ADC/DAC or sensor interfaces, memory, PCIe/DMA-capable data paths, and application-facing control needs.
• Hands-on board bring-up and troubleshooting experience with common lab and test equipment.
• Ability to read datasheets, schematics, layout constraints, interface specifications, and system requirements, then turn them into practical hardware designs.
• Clear communicator who documents decisions and works well across electrical, FPGA, embedded software, RF, DSP, mechanical, and systems teams.
• Experience with AMD/Xilinx, Intel/Altera, or other FPGA/SoC platforms, carrier boards, SOMs, RFSoC-class devices, or high-pin-count digital designs.
• Experience with PCIe, USB 3.x, 10G/40G Ethernet, SFP/QSFP, JESD204, DDR memory, raw transceivers, or other high-speed interfaces.
• Experience with Analog Devices RF transceivers, SDR platforms, ADC/DAC signal chains, or products similar to ADRV9009.
• Experience with low-SWaP, ruggedized, outdoor-deployed, military/aerospace, or mission-critical hardware.
• Experience with RF-adjacent or mixed-domain design from DC to microwave frequencies, including grounding, shielding, filtering, and interconnect strategy.
• Experience with signal-integrity or power-integrity simulation, EMI/EMC mitigation, and high-density PCB layout practices.
• Experience with MCUs such as STM32, ESP32, or similar devices for board control, monitoring, or support functions.
• Experience with SMD rework, fine-pitch PCB modification, prototype assembly, cable/harness assembly, enclosures, 3D printing, or basic fabrication.
• Experience in cUAS, RF sensing, SDR, radar, electronic warfare, distributed sensor systems, or rapid R&D prototyping.
• Active DoD clearance or prior clearance eligibility.

Responsibilities

• Design high-speed digital and mixed-domain PCBs for RF and multi-sensor platforms.
• Architect board-level hardware around FPGAs/SoCs, RF transceivers, ADCs/DACs, MCUs, memory, clocks, power, and high-speed interconnects.
• Create schematics, BOMs, layout constraints, design notes, and release packages using tools such as Altium.
• Support interfaces such as PCIe, USB, Ethernet, SFP/QSFP28, JESD204, QSPI, I2C, RS-422, and similar board-level buses.
• Develop clocking, synchronization, reset, and power-sequencing approaches for coherent sensors and high-throughput data paths.
• Collaborate with FPGA and embedded software engineers to define clean hardware interfaces, bring-up paths, debug hooks, control signals, and data-movement needs.
• Collaborate with RF engineers on mixed-domain partitioning, RF/digital layout, transceiver integration, signal integrity, power integrity, and EMI/EMC considerations.
• Bring up new boards using oscilloscopes, logic analyzers, spectrum analyzers, VNAs, power analyzers, protocol analyzers, and related lab tools.
• Troubleshoot hardware, firmware, and system-level issues from bench prototypes through integration and field testing.
• Iterate designs quickly based on test results, evolving requirements, manufacturing feedback, and field observations.
• Support design reviews, DFM/DFT activities, vendor coordination, prototype builds, and transition from proof-of-concept hardware toward reusable platform designs.
• Keep schematics, layout files, test plans, bring-up notes, validation results, and engineering documentation clear and current.

Skills

High-speed digital design

RF electronics

PCB layout

Schematic capture

Signal integrity

FPGA/SoC knowledge

Power integrity

Documentation

Education

B.S. in Electrical Engineering or related field

Tools

Altium

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Senior Electrical Engineer

FullTime Wichita, KS, US

29 days ago Requisition ID: 1012

Candidate should live within driving distance of the following areas: Wichita, KS; Lawton OK; or Round Rock, TX

Job Purpose/Summary

The Senior Electrical Engineer supports the rapid development of next-generation, AI-enabled hardware and sensor platforms for counter-UAS (cUAS) and multi-sensor applications. This role creates the board-level hardware foundation that enables future capabilities.

The engineer will design high-speed digital, mixed-signal, and RF-supporting electronics. This includes integrating embedded processors, programmable logic, transceivers, clocks, power systems, and board-level interfaces. The engineer will support hardware from early architecture through prototype, lab test, and field validation.

Working closely with FPGA, embedded software, RF, DSP, mechanical, and application software engineers, this role helps transform new hardware concepts into modular, mission-ready capabilities. The ideal candidate will be excited to work in a fast-moving R&D environment, solve challenging hardware problems, and help build technology that moves quickly from concept to real-world impact.

Duties and Responsibilities

• Design high-speed digital and mixed-domain PCBs for RF and multi-sensor platforms.
• Architect board-level hardware around FPGAs/SoCs, RF transceivers, ADCs/DACs, MCUs, memory, clocks, power, and high-speed interconnects.
• Create schematics, BOMs, layout constraints, design notes, and release packages using tools such as Altium.
• Support interfaces such as PCIe, USB, Ethernet, SFP/QSFP28, JESD204, QSPI, I2C, RS-422, and similar board-level buses.
• Develop clocking, synchronization, reset, and power-sequencing approaches for coherent sensors and high-throughput data paths.
• Collaborate with FPGA and embedded software engineers to define clean hardware interfaces, bring-up paths, debug hooks, control signals, and data-movement needs.
• Collaborate with RF engineers on mixed-domain partitioning, RF/digital layout, transceiver integration, signal integrity, power integrity, and EMI/EMC considerations.
• Bring up new boards using oscilloscopes, logic analyzers, spectrum analyzers, VNAs, power analyzers, protocol analyzers, and related lab tools.
• Troubleshoot hardware, firmware, and system-level issues from bench prototypes through integration and field testing.
• Iterate designs quickly based on test results, evolving requirements, manufacturing feedback, and field observations.
• Support design reviews, DFM/DFT activities, vendor coordination, prototype builds, and transition from proof-of-concept hardware toward reusable platform designs.
• Keep schematics, layout files, test plans, bring-up notes, validation results, and engineering documentation clear and current.

Qualifications

Minimum

• Eligible to obtain a U.S. Security Clearance - U.S. Citizenship required.
• B.S. in Electrical Engineering, Computer Engineering, or related technical field.
• 5+ years of experience designing high-speed digital, mixed-signal, embedded electronics, FPGA/SoC carrier boards, RF-adjacent hardware, or similar systems.
• Strong schematic capture and PCB design experience; Altium experience preferred.
• Working knowledge of high-speed serial design, differential signaling, controlled impedance, stack-up planning, timing, clocking, reset, and board-level signal integrity.
• Experience with power supplies, power sequencing, power integrity, thermal constraints, and dense embedded hardware design.
• Ability to design hardware that supports FPGA/SoC integration, ADC/DAC or sensor interfaces, memory, PCIe/DMA-capable data paths, and application-facing control needs.
• Hands-on board bring-up and troubleshooting experience with common lab and test equipment.
• Ability to read datasheets, schematics, layout constraints, interface specifications, and system requirements, then turn them into practical hardware designs.
• Clear communicator who documents decisions and works well across electrical, FPGA, embedded software, RF, DSP, mechanical, and systems teams.
• Experience with AMD/Xilinx, Intel/Altera, or other FPGA/SoC platforms, carrier boards, SOMs, RFSoC-class devices, or high-pin-count digital designs.
• Experience with PCIe, USB 3.x, 10G/40G Ethernet, SFP/QSFP, JESD204, DDR memory, raw transceivers, or other high-speed interfaces.
• Experience with Analog Devices RF transceivers, SDR platforms, ADC/DAC signal chains, or products similar to ADRV9009.
• Experience with low-SWaP, ruggedized, outdoor-deployed, military/aerospace, or mission-critical hardware.
• Experience with RF-adjacent or mixed-domain design from DC to microwave frequencies, including grounding, shielding, filtering, and interconnect strategy.
• Experience with signal-integrity or power-integrity simulation, EMI/EMC mitigation, and high-density PCB layout practices.
• Experience with MCUs such as STM32, ESP32, or similar devices for board control, monitoring, or support functions.
• Experience with SMD rework, fine-pitch PCB modification, prototype assembly, cable/harness assembly, enclosures, 3D printing, or basic fabrication.
• Experience in cUAS, RF sensing, SDR, radar, electronic warfare, distributed sensor systems, or rapid R&D prototyping.
• Active DoD clearance or prior clearance eligibility.

Working conditions

• Employees may be called upon to participate in in-person meetings, trainings, lab work, field activities, or company functions at Knowmadics offices or other designated locations. Travel in support of business operations may also be required, and employees are expected to comply with these obligations as part of their position.
• Candidate should live within driving distance of Wichita, KS; Lawton, OK; or Round Rock, TX, or be able to support hybrid/remote work with in-person attendance as needed.
• Work may occur in office, laboratory, integration, test-range, field, or customer-adjacent environments depending on project needs.
• Some weekend or extended-hour work may be required based on project deadlines, hardware bring-up, testing schedules, field events, or operational needs.
• Estimated travel: less than 10%, with occasional additional travel based on project or field-test requirements.

Physical requirements

• Prolonged periods of remaining in a stationary position at a desk and working on a computer.
• Hands-on work with circuit boards, prototype hardware, lab equipment, cables, tools, computers, and technical equipment in an engineering lab environment.
• Occasional lifting, carrying, or moving of materials, tools, prototype systems, test equipment, or hardware assemblies may be required.

Direct reports

None

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.