Senior Controls Engineer

Darwin Recruitment

Reston (VA)

On-site

USD 90,000 - 130,000

Full time

4 days ago
Be an early applicant

Get a reply from this recruiter

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Darwin Recruitment seeks a Building Automation Controls Engineer to develop comprehensive shop drawings, review specifications, and integrate DDC systems across BACnet and Modbus networks. You will design BAS architecture, select controllers, and guide field teams through installation and commissioning.

requirements include a degree in electrical/mechanical/building systems and 5–7 years in building automation. Travel to DC/MD/VA region may be required.

Qualifications

  • Bachelor's degree in Electrical/Mechanical/Building Systems Engineering or related field.
  • Minimum 5-7 years of building automation or controls experience with shop drawings.
  • Strong knowledge of DDC controllers, BACnet MS/TP, BACnet/IP, and Modbus RTU/TCP.
  • Experience with Lynxspring, Johnson Controls Facility Explorer, and Distech Controls systems.
  • Advanced proficiency in Microsoft Visio for controls drafting.
  • Strong understanding of low-voltage control circuits, wiring practices, and BAS networking.
  • Knowledge of HVAC systems (AHU, VAV, central plants, DOAS, VRF, hydronic).
  • Ability to interpret mechanical, electrical, and controls drawings, specifications, and sequences of operation.
  • Familiarity with ASHRAE Guideline 36, ASHRAE 135 (BACnet), NEC requirements.
  • Ability to manage multiple projects, meet deadlines, and travel to DC/MD/VA region.

Responsibilities

  • Develop complete controls shop drawings and submittals using Visio.
  • Review drawings and specs to determine controls scope and integration requirements.
  • Select and apply DDC controllers, I/O modules, sensors, actuators, valves, and network devices.
  • Design BAS network architecture (BACnet MS/TP, BACnet/IP, Modbus RTU/TCP).
  • Provide guidance to BAS programmers, startup technicians, and field installers.
  • Prepare as-built drawings and assist with project closeout docs.
  • Support estimating with point counts, equipment selections, and technical scope.

Skills

DDC controllers
BACnet MS/TP
BACnet/IP
Modbus RTU/TCP
Lynxspring
Johnson Controls Facility Explorer
Distech Controls
Microsoft Visio
Low-voltage circuits
BAS networking
HVAC knowledge
Reading drawings & specs
Project management

Education

Bachelor's degree in Electrical/Mechanical/Building Systems Engineering or related field

Tools

Visio

Job description

Key Responsibilities


  • Develop complete controls shop drawings and submittals using Microsoft Visio, including system schematics, wiring diagrams, network risers, panel layouts, points lists, bills of materials, and sequences of operation.


  • Review mechanical drawings, project specifications, and equipment submittals to determine controls scope, point counts, and integration requirements.


  • Select and apply DDC controllers, I/O modules, sensors, actuators, valves, and network devices based on project requirements.


  • Design BAS network architecture, including BACnet MS/TP, BACnet/IP, Modbus RTU/TCP, device addressing, and third-party equipment integration.


  • Apply knowledge of Lynxspring, Johnson Controls Facility Explorer, and Distech Controls platforms to develop effective solutions.


  • Design low-voltage power and control circuits, including transformer sizing, power distribution, voltage drop, and safety interlocks.


  • Identify and resolve design conflicts, equipment limitations, and sequence-of-operation challenges.


  • Prepare RFIs to clarify project specifications, design intent, and technical requirements.


  • Address submittal review comments and revise engineering drawings through approval.


  • Provide technical guidance to BAS programmers, startup technicians, and field installers throughout installation, testing, and commissioning.


  • Prepare as-built drawings and assist with project closeout documentation.


  • Support estimating teams with point counts, equipment selections, and technical scope reviews when needed.


  • Mentor junior engineers and contribute to engineering standards, templates, and best practices.



Qualifications & Experience


  • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Building Systems Engineering, Engineering Technology, or a related field. Equivalent controls engineering experience will be considered.


  • Minimum of 5-7 years of experience in building automation or controls engineering, including shop drawing development.


  • Strong knowledge of DDC controllers, BACnet MS/TP, BACnet/IP, and Modbus RTU/TCP protocols.


  • Experience with Lynxspring, Johnson Controls Facility Explorer, and Distech Controls systems.


  • Advanced proficiency in Microsoft Visio for controls drafting.


  • Strong understanding of low-voltage control circuits, wiring practices, and BAS networking.


  • Knowledge of HVAC systems, including air handling units, VAV systems, central plants, DOAS, VRF, and hydronic systems.


  • Ability to interpret mechanical, electrical, and controls drawings, specifications, and sequences of operation.


  • Familiarity with ASHRAE Guideline 36, ASHRAE 135 (BACnet), and applicable NEC requirements.


  • Ability to manage multiple projects, meet deadlines, and resolve technical challenges.


  • Valid driver's license and ability to travel to jobsites throughout the DC, Maryland, and Virginia region.


Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Design Engineer
Design Engineer

LVI Associates • Washington

On-site
USD 90,000 - 120,000
Controls Design Engineer - BAS
Controls Design Engineer - BAS

OPIX Systems, LLC • Lawrenceville (GA)

On-site
USD 70,000 - 90,000
Controls Design Engineer - BAS
Controls Design Engineer - BAS

OPIX Systems • Lawrenceville (GA)

On-site
USD 70,000 - 90,000
Mechanical Controls Engineer Data Centers
Mechanical Controls Engineer Data Centers

Data Center Frontier LLC • Ashburn (VA)

Remote
USD 120,000 - 160,000
Medical Insurance
401(k) Plan
Controls Design Engineer - Building
Controls Design Engineer - Building

M1 Search Group • Pleasanton (CA)

On-site
USD 90,000 - 130,000
Building Controls Engineer
Building Controls Engineer

SJ Mobilita • Connecticut

On-site
USD 90,000 - 120,000
Senior Controls System Engineer
Senior Controls System Engineer

TEC Systems • New York (NY)

On-site
USD 110,000 - 160,000
Medical insurance
Dental insurance
Vision insurance
+3
BAS Controls Design Engineer
BAS Controls Design Engineer

HTS Engineering Ltd. • Houston (TX)

On-site
USD 90,000 - 120,000
Control Design Engineer I
Control Design Engineer I

Next Level HVAC Energy Management Systems • La Habra (CA)

On-site
USD 65,000 - 90,000
Controls Specialist
Controls Specialist

HTS Engineering - Heat Transfer Solutions • Houston (TX)

On-site
USD 60,000 - 90,000