Safety & Radio Compliance Test Engineer

Fortive Careers; Everett (WA); Hybrid; USD 110,000 - 140,000; Full time

Benefits offered by this job

Hybrid work environment

Professional development

Job summary

Fortive Careers seeks a Safety/RadioTest Engineer to drive regulatory certifications and compliance for Fluke products. You will evaluate designs, plan tests, and prepare reports for international certification bodies while coordinating with third‑party labs.

The role requires hands-on lab work with RF/wireless topics, strong documentation skills, and collaboration across engineering teams. Hybrid work in Everett, WA is possible.

Qualifications

• Bachelor's degree in Electrical Engineering or higher recommended.
• Minimum 3 years of experience in product safety, RF compliance or EMC evaluation or related lab work.

Responsibilities

• Review new product designs and evaluate designs against evolving standards.
• Define and document test plans and ISO 17025 compliant results.
• Coordinate with third‑party labs to obtain certified radio and EMC approvals.
• Prepare and defend test reports to certification bodies such as CSA and ETL.
• Develop test equipment procedures and maintain equipment performance.

Skills

RF compliance testing

EMC testing

lab instrumentation

technical writing

Education

Bachelor's degree in Electrical Engineering

Tools

Oscilloscopes

Spectrum analyzers

Multimeters

Job description

The FlukeProduct Compliance team is seeking a Safety/RadioTest Engineer toprotectbusiness growth by accessing, testing and obtaining relevant certificates for new and existing products. Fluke is the world leader in professional electronic test tools and software; your work will help keep the world up and running by developing and sustaining rugged, reliable, and safe test and measurement tools used by professionals in critical and fast-growing industries such as solar power and electric vehicle service equipment.

Reporting to the manager of theProduct Compliance Team your responsibilities will be as follows.

Responsibilities:

• Review and evaluate new product designs, support engineering changes to existing designs, and evaluate legacy equipment against constantly evolving standards.
• Determinefunctional, environmental, and/orcompliancetest requirements and applicability of tests, equipment, and facilities. Define and complete test plans and document results in compliance with ISO 17025.
• Evaluate progress of tests for validity of test conditions, means of measurement and performance of components or equipment in relation to specifications or requirements of harmonized standards.
• Review and document test results; take corrective action as needed. Analyzecomponentfailures; recommend alternate components or design changes.
• Author and defend test reportssubmittedinternational certification bodies such as CSA and ETL.
• Specify, select and/or design laboratory test equipment vital to complete equipment assessment;assistin preparation of documents to enable fabrication of new test equipment; write operating/verification procedures for new laboratory equipment and build preventative maintenance procedures and schedules.
• Review and evaluate new product designs, support engineering changes to existing designs, and evaluate legacy equipment againstFCC/IC/EU(RED) set ofstandards.
• Work with 3rdparty test laboratories to obtain accredited certifications for Radioand EMC.
• Consult withnewproductintroduction team todetermineradiocertification plan,timelineand cost.
• Adviseonsuitability of selected radiomoduleandROI for global market access of new products in development.
• Sustain regional radiocertificationsasrequired due to certificate expiration or changing regulations or requirements.
• Working knowledge of RFand wireless technologies including Wi-Fi, Bluetooth,andZigbee.
• Basic understanding of metrology and how to interpret laboratory equipment specifications and suitability for measurement needs.
• Basic electronics skills includingRLC, op amp, diode, and transistor circuit analysis.
• Comfortable with understanding, interpreting, and applying generalized test procedures and standards towidevariety of specific product applications.
• Strong background in MS Office and other software tools including Teams, Word, Excel, Outlook, PowerPoint, Access, SharePoint, Miroetc.)experience in formatting and document manipulationa must. Document automation, template creation,VBA/Python/macro writing experiencea benefit.
• Strong language and communication skills including technical writing, user documentation review and editing along with clear and concise communication through email, MS Teams, phone conversations, and instant messaging.
• Comfortable training other associates onuseof laboratory equipment. ‘See one, do one, teach one’ mentality.
• Solid understanding of basic physics and physical concepts a necessity including ac/dc voltage, electrical current, resistance, inductance, capacitance, power, energy, force, acceleration, temperature, pressure, heat transfer, etc. Working knowledge of high frequency RF a plus.
• Strong background using a wide variety of test equipment including multimeters, calibrators, oscilloscopes, signal generators, power supplies, spectrum analyzers, current clamps, and thermometers with an understanding of their capabilities and limitations. Able to select the proper equipment for each task/measurement with limitedassistance.
• Should be able to disassemble and reassemble sophisticated test and measurement and laboratory equipment without instructions or damaging the equipment tofacilitatedesign review, prep for laboratory testing and failure analysis.
• Comfortable with work around high voltage,high temperature, high pressure, flammable materials, and other potentially hazardous test environments whereappropriate safetyprecautions must be rigorously followed.
• Comfortable analyzing schematics and wiring diagrams to understand basic concepts of circuit function, potential sources of failure, and components and subsystems relied upon for protection against hazards.
• Normal office and laboratory environments. Extra hours may berequiredfor meeting commitments but should be considered atypical. Opportunity to work from home 2 days per week depending on laboratory workload requirements. Travel less than 5%.

Qualifications:

• Bachelorsdegree in Electrical Engineering or higher recommended. Other engineering/physical science degrees may be acceptable with suitable laboratory or other relevant electrical/electronicsexperience per below.
• Minimum 3 years of experience in product safety, RF compliance or EMC evaluation,electronicsdesign, or relevant laboratory work towards product compliance safety evaluation. Experience with third party certificationlaboratoriessuch as UL, CSA, TUV, Interteketca plus.
• Program management skills in driving certification labs, effectively prioritizingcertificationrequirementsand achieving deadlines.

About Us

Fortive Corporation Overview

Fortive’s essential technology makes the world stronger, safer, and smarter. We accelerate transformation across a broad range of applications including environmental, health and safety compliance, industrial condition monitoring, next-generation product design, and healthcare safety solutions.

We are a global industrial technology innovator with a startup spirit. Our forward-looking companies lead the way in software-powered workflow solutions, data-driven intelligence, AI-powered automation, and other disruptive technologies. We’re a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to groundbreaking sustainability solutions.

We are a diverse team 18,000 strong, united by a dynamic, inclusive culture and energized by limitless learning and growth. We use the proven Fortive Business System (FBS) to accelerate our positive impact.

At Fortive, we believe in you. We believe in your potential—your ability to learn, grow, and make a difference.

At Fortive, we believe in us. We believe in the power of people working together to solve problems no one could solve alone.

At Fortive, we believe in growth. We’re honest about what’s working and what isn’t, and we never stop improving and innovating.

Fortive: For you, for us, for growth.

About the Team

About Fluke

Fluke is leading the world in creating software, test tools and technology that will support customers today and in the future. We are a customer-obsessed market leader with a strong reputation for reliability, quality and safety.

A wholly owned subsidiary of Fortive Corporation (www.fortive.com), Fluke is a global corporation headquartered in the greater Seattle area. Driven by the successful Fortive Business System, Fluke offers the passion of a startup with the resources of a Fortune 500 company. We are focused on the growth of our individual employees, teams and the Fluke brand.

We Are an Equal Opportunity Employer

Fortive Corporation and all Fortive Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Fortive and all Fortive Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at [e-mail].

Job Info

• Job Identification 10140
• Job Category Test Engineering & Metrology
• Posting Date 06/30/2026, 07:24 PM
• Job Schedule Full time
• Locations 6920 Seaway Blvd, Everett, WA, 98203, US (Hybrid)